SOL-EXPERT-group
SOL-EXPERT-group
User Manual for SOL-EXDEDT models including: ER105, Speed Controller
USER MANUAL CONTROLLER FORWARD / REVERSE ER105 SPEED CONTROLLER Order No.: ER105 Dimensions: 12,8 x 9 x 2,5 mm www.1zu87modellbau.de SOL-EXPERT group Imp. -Terminal outputs This speed controller stands out on account of its state-of-the-art functionality in the smallest possible space.
Conrad e-B2B on-line (SLO) - Trgovina za podjetja! Bedienungsanleitung 248760 Sol Expert ER105 Fahrtregler 2.7 - 5.5 V (L x B x H) 12.8 x 9 x 2.5 mm.
File Info : application/pdf, 1 Pages, 82.75KB
DocumentDocumentReceiver in Motor out - Subject to modification / E&OE / As at June 2009 / Christian Repky © - www.1zu87modellbau.de USER MANUAL ER105 SPEED CONTROLLER Order No.: ER105 Conrad No. 248760 SOL-EgXrPoEuRpT CONTROLLER FORWARD / REVERSE Terminal outputs Technical data Operating current in V Motor current continuous in mA Motor current impulse in A Weight excluding cable in g Dimensions in mm (l x b x h) Automatic zero-point recognition ER105 2,7 - 5,5 1800 * 8* 0,32 12,8 x 9 x 2,5 yes (*) The output stage should be cooled in an appropriate manner that corresponds to the loading of the controller! Wiring diagram -++ Imp. + Imp. Dimensions: 12,8 x 9 x 2,5 mm Characteristic line Power in % 100 75 50 (Linear) 25 Lever travel in % 0 25 50 75 100 ER105 Functions and instructions This speed controller stands out on account of its state-of-the-art functionality in the smallest possible space. With a continuous current of 1900 mA and an impulse current of 8 A, the ER105 is not only suitable for 1:87 scale modelling, but also for considerably larger scales, such as 1:32. The stored linear characteristic line guarantees a convenient control of DC motors. Switching on the transmitter and receiver unit. First the transmitter is switched on, then the receiver. The control knobs must not be moved until approx. 3 seconds. Now the precise zero point is registered. Safety instructions to ensure long service from the ER105 Before first using the ER105, the following checks should be made to prevent any damage being caused to the controller: - check on the polarity of the operating current - check that there is no short-circuit at the motor outputs. In case of faults or malfunction of the ER105, please read our suggested hints for suggested solutions under www.1zu87modellbau.de here you will also finds tips for correcting faults. SOL-EXPERT group Dept. 1zu87modellbau.de CEO: Christian Repky Mehlisstrasse 19 D- 88255 Baindt vertrieb@1zu87modellbau.de Phone: +49.7502.94115.0 Fax: +49.7502.94115.99 www.1zu87modellbau.de