EAZZE D1 MAX Projector User Manual
Model: A01M31
Brand: EAZZE
Manufacturer: Shenzhen Neutop Optoelectronics Co., Ltd
Introduction
Welcome to the EAZZE D1 MAX projector. This manual provides comprehensive instructions for setting up and operating your new projector.
Package Contents
Verify that all the following items are included in the package:
- Projector
- Remote Control
- Power Adapter
- HDMI Cable
- User Manual
Product Overview
The EAZZE D1 MAX is a high-definition projector designed for home entertainment and presentations. It features multiple connectivity options and a user-friendly interface.
Front View:
Description of front view: Lens, Infrared receiver.
Rear View:
Description of rear view: Power port, HDMI port, USB port, AV port, Audio out port, Reset button.
Side View:
Description of side view: Air intake vents.
Top View:
Description of top view: Power button, Navigation buttons, OK button, Menu button.
Remote Control:
Description of remote control: Power button, Navigation arrows, OK button, Back button, Menu button, Volume up/down, Mute button, Source button, Play/Pause button, Previous/Next track buttons.
Setup Instructions
- Connect the power adapter to the projector and a power outlet.
- Connect your video source (e.g., laptop, streaming device) using an HDMI cable.
- Turn on the projector using the power button on the device or the remote control.
- Adjust the focus and keystone correction as needed for a clear image.
Operation
Powering On/Off
Press the power button on the projector or remote control to turn the device on or off. A short press will initiate standby mode.
Adjusting Focus and Keystone
Use the focus ring on the lens to sharpen the image. For keystone correction, navigate to the settings menu and adjust the keystone settings.
Input Sources
Press the Source button on the remote control to cycle through available input sources (HDMI, AV, USB, etc.).
Troubleshooting
- No Image: Ensure the projector is powered on and the correct input source is selected. Check cable connections.
- Blurry Image: Adjust the focus ring. Ensure the projector is at the optimal projection distance.
- No Sound: Check the volume settings on the projector and the connected device. Ensure the audio cable is properly connected.
Specifications
| Feature | Specification |
|---|---|
| Model | A01M31 |
| Resolution | 1920 x 1080 DPI |
| Brightness | 800 ANSI Lumens |
| Contrast Ratio | 5000:1 |
| Lamp Life | 30,000 hours |
| Projection Size | 40-150 inches |
| Input Ports | HDMI, USB, AV |
| Output Ports | Audio Out |
Safety Information
Do not look directly into the projector lens. Keep the projector away from water and moisture. Use only the provided power adapter.