Owner's Manual for Spireon models including: O9YKION, O9YKION, KiION-2, KiION-2 Battery Powered Automotive and Asset Tracker, Battery Powered Automotive and Asset Tracker, Automotive and Asset Tracker, Asset Tracker

KION?User?MANUAL?

Lenovo

Users Manual

Spireon Inc KION GPS Tracker O9YKION O9YKION kion

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=6511822
Battery Powered Automotive and Asset Tracker
Maximize efficiency. Minimize risks. Manage assets.

Kion

Ideal for Automotive or other assets, the battery powered Kion GPS tracker is a small device that is easy to deploy. It's waterproof IP67 enclosure also allows it to be used in harsh environments. The Kion tracker supports different mounting options to support different applications.
IT'S RELIABLE The Kion is a high-performance, IP67 rated device. It includes an integrated CAT- M1 LTE modem, a GPS receiver, and a 3-axis accelerometer, for cellular data communication, location tracking, and motion detection respectively.
IT'S SIMPLE With Non-chargeable batteries the Kion is easy to install. Kion can report in each event include wake-up on motion, upon tamper detection by light sensor, Trip start, trip stop, heartbeat, or upon a preset schedule. Reports can be triggered periodically or in response to events.
IT'S FUNCTIONAL The Kion comes with pre-configured software. Its internal motion sensor and configurable event alarms enable total management of your high-value assets. The device supports variable frequency reporting when moving or stationary.
LONG BATTERY LIFETIME Kion has a big 12000nAh battery, that can provide 3-5 years with 1 report a day depending on configuration.

HIGHLIGHTS
LTE CAT M1  Integrated cellular and GPS antenna
 LED status indicators for GPS and network registration
 Integrated accelerometer
 IP67 sealed, weather resistant enclosure
 Communication via SMS, UDP, Ack UDP
 Configurable reporting schedules  Over-the-air configuration and
firmware upgrade
 Extended AT Command set for flexible and easy configuration
 Up to 16 Polygon Geo-fences  Optional magnetic mounting plate
 Light sensor tamper detection

Asiatelco Technologies Co. | 4611 Teller Ave, Newport Beach CA 92660

Specifications

CELLULAR  CAT 1 LTE: B1/B2/B3/B4/B5/B12/B13/B20/B26/B28  Integrated high sensitivity antenna  Auto register to packet network
GPS  Channels: 55  Tracking Sensitivity: -157 dBm  Acquisition Sensitivity: -146 dBm  Location Accuracy: <2.5 CEP (50%)
BATTERY INFORMATION  Battery Type: Non-chargeable battery 3.0V@12000mAh  Battery Life: Up to 5 years @ 1 report per day
ENVIRONMENTAL  Operation Temperature: -30°C to +70°C  Storage Temperature: -40°C to +80°C  Operation Humidity: 20% to 90% (noncondensing)  Storage Humidity: 10% to 95% RH (noncondensing)  Designed to meet SAE J1455

ELECTRICAL External power input Voltage: 8V-32VDC  On-battery
 Shipping mode:<10uA  Hibernate: <15uA  Sleep:< 2mA  Active mode<100mA (average current)
PHYSICAL  Dimensions: 93mm x 59mm x 34.5mm  Weight: 220g  Internal Cellular and GPS Antenna
INTERFACE CONNECTOR  I/O Connector: 5-pins water-proof (POGO Pin)
 UART1 TTL (1.8V) (RX/TX)  One GPIO (1.8V)  External Power 8-32V  GND
APPROVALS  FCC  IC  PTCRB & Carrier Approve

Asiatelco Technologies Co. | 4611 Teller Ave, Newport Beach CA 92660

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/ TV technician for help.  Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
6

ISED Warning statements
This device complies with Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (l) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparationd'aumoins 20 cm doitêtremaintenue entre l'antenne de cetappareilettoutes les personnes. This Class B digital apparatus complies with Canadian ICES-003. Cetappareilnumeriquede la classe B estconforme a la norme NMB-003 du Canada.


Acrobat Distiller 21.0 (Windows)