Instruction Manual for Cheerstar Technology models including: MCS007, 2A7GK-MCS007, 2A7GKMCS007, MCS007 Air Conduction Wireless Headphones, MCS007, Air Conduction Wireless Headphones
Cheerstar Technology Co., Ltd MCS007 2A7GK-MCS007 2A7GKMCS007 mcs007
MCS007 MIMnapodudete:inl5: .CM0hVCinSa005700mA 3 2 1 5 4 1.//// //// 2./ 3. 4.LED 5. : , , 5, LED 1, : power on; : , , 5, LED , : power off ; BT: , 5, , LED, : Pairing; ( )MCS007; : , : Connected, LED5; /: BT, ,; / : , 2 ; : ; : ; 100% : ; : ,2; : ,2; : BT,, ; usb : 5, 1; : , USB, , LED, ,; : , : Disconnected pairing; LED , 300 300; DUT: 5 ; , , ---------------7(70%) -------------------20 -------------------1.5 ---------------------5.2 -------------------22±15% ---------------- -42±3db -------------------27g±2g -------------------12 / -------------5V/0.5A · , ; · , , ; · , , ; · ; · ; · , ; · , ; , FCC FCC15 B : -- -- -- --/ FCC15 :(1) (2) MIMnapodudete:inl5: .CM0hVCinSa005700mA Manual Instruction for Air Conduction Wireless Headphones Summary of button functions 3 2 1 5 4 1. Power on/Power off/Volume up/Next song/Pause/ Play/ Answer Phone Call/ End Phone Call/ Voice Assistant 2. Volume down/Previous song 3. Magnetic charging port 4. LED indicator 5. Two Microphones Controls On: When the headphone is in power-off state, press and hold power button for 5 seconds with blue LED flickering, reminding tone: power on. Off: When the headphone is in power-on state, press and hold power button for 5 seconds with red LED flickering once, reminding tone: power off. Or automatically shut down after plugging in the charging cable Connect BT: When the headphone is in power-off state, press and hold it for 5 seconds to enter a pairing state with red and blue LEDs flickering and reminding tone: pairing. After the device (smart phone, tablet computer, etc.) search MCS007, press it to connect. Connected successfully: When the headphone is successfully linked to the device, blue LED will flicker every 5 seconds with reminding tone: Connected Pause/play: In the BT connection music playback state, double click the power button to pause, and then double click the power button to play; Answer/hang up: In the incoming call state: click the power button to answer, long press the power button for 2 seconds to reject the call. In the call state, click the power button to hang up; Vol+: Press the power button once to turn up the volume. ( Call volume 100% by default) Vol-: Press the Vol- button once to turn down the volume. Next song: Long press the power button for 2 seconds when music is playing; Previous song: Long press the Vol- button for 2 seconds when music is playing; Voice assistant: Keep BT link, and triple click the power button to turn on the voice assistant, then triple click it again to exit. Reset: After plugging the charging line, the headphone will be reset and powered off for charging. Clear pairing information: In the shutdown state, press the power button and the vol- button for 5 seconds at the same time to clear the pairing information, and then enter the pairing mode, Red and Blue light blinks 1 second spontaneously. Charging: In case of using charging line for charging, connect the headphone with the USB power. During the charging, LED turns red. After charging, the LED turns blue. Over-range entry pairing: The headset is out of range of Bluetooth, the headset indicates that the connection is disconnected, the headset tone: Disconnected pairing; Led indicator red and blue lights flashing, the headset enters the backto-connect state, the back-to-back state is maintained for 300 seconds (during the period to return to the range to connect to Bluetooth), no connection after 300 seconds to shut down; DUT mode: After power on, 5 click the power button in pairing mode, blue light flash, charging or manual shutdown exit; How to wear Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable. Specifications Music play time-------------------7 hours(70% volume) Standby time----------------------20 days Charging time---------------------1.5 hours BT version-------------------------5.2 Speaker impedance-------------22+15% Microphone sensitivity---------- -42+-3db Product weight--------------------27g-+2g Connection distance-------------12 m-eters Charging voltage/current-------5V/0.5A Attentions Please wear the speakers of the headphone at your cheekbones before your ears and do not put them in your ears. Listening to music for an excessive long time mayake you feel uncomfortable, please try to use a medium volume instead of a big one. No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.. Do not throw, press the headphone or put it in the water. The headphone should keep away from fire, water and high voltage devices.. It is not for children's use as it contains small parts. Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station. If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user 's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.Corel PDF Engine Version 22.0.0.412 CorelDRAW 2020