User Manual for MORRIS models including: MAP-36310, Air Purifier

MAP-36310 - amiridis-savvidis.gr

BEFORE YOU START. • Ensure your router provides a standard 2.4ghz connection. • If your router is dual band ensure that both networks have different network ...

WiFi function instructions

MORRIS MAP-36310 ΚΑΘΑΡΙΣΤΗΣ ΑΕΡΑ

PDF preview unavailable. Download the PDF instead.

MAP-36310 WiFi manual EN
MAP-36310
USER MANUAL
for WiFi connection

ST U T S A UA
&KZzKh^dZd
x ZZZZZ x / Z Z      Z Z   Z  ^^/
dZZZZ/^WZZZZZ x Wair purifierZZZZ x KZZZZZZZ
ZZZZZ
KtE>Kd,WWdKzKhZW,KE
ZZ  dhz ^DZd   Z Z Z  Z Alternatively, you could also download the TUYA Smart app which is also compati le, ut has some sli ht differences in the layout REMARK: Alternatively, you can use the TUYA Smart application, which has a similar layout and functions
5(*,67(57+($33
. Click on the register button at the bottom of the screen
2. Click "Agree" to the ''Privacy Policy''.
Page 

3.Enter either your mobile phone number or email address to receive a verification code, and press ''next''.
4.Once you have received the verification code, enter it and create a password in the lower box before pressing ''Confirm''.
emark: the verification code shall be sent to you either by sms or by e-mail message, depending on the registration method you have selected above.
Page 

&211(&7,210(7+2'6$9$,/$%/()256(783
This smart device has two different setup modes: "Add Manually" and "Search by Device" efore starting the setup, please ensure that your air purifier is placed as close as possible to your WiFi-router.
(17(5,1*&211(&7,2102'( To enter connection mode on your air
purifier, press and hold 'Mode' button for 5" until the 2 lights of 'Auto' and 'Silent' start flashing rapidly. You will hear a sound.
&211(&7,1*THROUGH THE "ADD MANUALLY" TAB
efore initiating the connection, make sure the WiFi is ON and that the relative indication is flashing. If not, press again and keep pressed for 5 seconds the 'Mode' button, while also ensure your phone is connected to the wifi network.
. Open app and click ³´ to ''Add
Device''.
Page 

2. Tap on the top left the "Add Manually" option. On the left side scroll down to "Small Home Appliances''. 6HOHFWWKH W\SHRIGHYLFHDV ³Air Purifier´.
Turn on the air purifier and press "MODE" for 5 seconds to enter the distribution network mode. Within five seconds you will see the 2 lights 'Auto' & 'Silent' on the front panel flashing rapidly .
3. Ensure the 2 lights on the 'Mode' button of air purifier are flashing rapidly (if not, turn off the air purifier, turn it on again and hold the 'Mode' button for 5 seconds until the 2 lights ('Auto' & 'Silent') on the front panel start flashing rapidly. Then press the button at the bottom of the screen to confirm).
Page 

4. Select your home network, enter
your WiFi password and click ''Confirm''.

. This will then transfer the settings to
the air purifier. Wait until the connection has been completed succesfully. If the connection fails, retry. If the connection is still failing please review the ''Troubleshooting'' section for further help. Once the connection has been completed, your device will appear on the screen. Press DONE button to complete the process.

Morris Air purifier

Page 

&211(&7,1*86,1*THE "SEARCH FOR DEVICE" TAB
efore initiating the connection, make sure the unit is switched on, with the connection lights (flashing. If not, press the 'Mode' button again and keep it pressed for 5 seconds, while also ensure that your phone is connected to the wifi network.
. Select "Search for Device" option on the top right hand corner of the screen. Make sure that access location is enabled and press on the "Enable WiFi" button to launch the connection procedure.
2. Ensure the connection lights 'Auto' & 'Silent' on the air purifier are flashing. Press 'Configuring WiFi'.
Page 

3. You should be seeing the name of your home network, to which your mobile device should already be connected as well. Enter the password in the relative field and press ''Confirm''. Important: Only 2.4GHz Wi-Fi networks are supported.
4. The searching of the device will start.
If searching fails, retry. If the connection is still failing, review the ''Troubleshooting'' section for help.
for further
. Once the searching is completed, you should see the air purifier found and appearing as an "Available device found". Press the "Next" button on the bottom to complete the linking.
Page 

'(9,&E CONTROL ENVIRONMENT
Now that your air purifier is linked up to your network, you can control it from your phone. Press 'Switch' button to turn your device on and off. Press 'Mode' button to set air purifier working at 'Manual', 'Auto' or 'Mute' mode. Press 'Wind/Speed' button to set speed of the device - Level 1 (Silent), Level 2 (Low), Level 3 (Middle), Level 4 (High).
Press 'Setting' to activate or de-activate Anion, Lights, UV Disinfection and Timer functions.
Page 

Press 'Countdown Timer' button to choose the time you wish to activate / de-activate the device. Choose to repeat the settings for specific time (1, 4, 8 hours) or cancel the setting.
Page 

TROUBLESHOOTING . Check whether the device is powered on and is in the correct standby mode, if not, please refer to the changing between connection types section. 2. Ensure the WiFi password has been entered into the app correctly (Case sensitive . 3. Check that the phone is connected to the WiFi you are connecting the device to. 4. Ensure the network you are connecting it to is 2.4Ghz ( Ghz wifi networks are not supported , and that there is a strong WiFi signal to the item. . Check the settings on the router. Encryption should be WPA2-PS and authorisation type should be set to AES. . If you are unable to connect through the uick connection method, please try following the guide for connecting the AP Mode.
DISCLAIMER:
All above instructions and illustrations are offered based upon the layout of TUYA's Smart Life application at the date of publishing. Actual layout of the application, its graphics, or exact menus at the time of installation may differ. This is the result of the applications constant updating so as to improve the user experience, resolve potential bugs, or even add more features. In case of any difficulty, please check our web-page for an updated version, or contact our after sales department.
Page 0

Exclusive Distributor
AMIRIDIS-SAVIDIS S.A. 87A, 17is Noemvriou Str
P.C. 55534 | Pylea | Greece T: 2310944944 | F: 2310944940

Version 1.0 | Sept 2020


Acrobat Distiller 11.0 (Windows)