Anko Alarm Clock Cloud

Function Overview

The Anko Cloud Alarm Clock features a cloud-shaped design with a digital display and several control buttons.

Key Components:

• 1. Snooze: Press to activate snooze mode when the alarm sounds.
• 2. LCD display: Shows time, date, temperature, and alarm status.
• 3. Power input port: USB-C port for connecting the power cable.
• 4. Alarm ON/OFF button: Toggles the alarm function on or off.
• 5. Set button: Used for setting time, date, and alarm.
• 6. Down button: Decreases values during setting or switches display modes.
• 7. Up button: Increases values during setting or switches display modes.

How to Use This Product

Connecting to Power

Insert the provided USB-C power cable into the power input port (3) and connect the other USB-A end to an appropriate power source.

Display Mode

The alarm clock has two display modes:

• DP1: Automatically cycles through Time, Date, and Temperature. It shows the Time for 10 seconds, then the Date for 2 seconds, and Temperature for 2 seconds.
• DP2: Displays either the time, alarm time, date, or temperature. Press the [up-button] (7) to select one of the four options.

Note: You can only change to DP1 while the time is displayed.

12H/24H Setting

While the time is displayed, press the [down-button] (6) to select between 12-hour and 24-hour time formats.

Time Setting

1. Press the [set-button] (5) to select the Time display.
2. Press and hold the [set-button] (5) to enter Time setting mode. The hour will flash.
3. Use the [up-button] (7) or [down-button] (6) to set the Hour. Press the [set-button] (5) to confirm the Hour and enter Minute setting.
4. Use the [up-button] (7) or [down-button] (6) to set the Minute. Press the [set-button] (5) to confirm the Minute setting.

Alarm Setting

• Press the [alarm-on-off-button] (4) to turn the alarm ON. An alarm symbol will appear on the bottom left side of the display.
• Press the [alarm-on-off-button] (4) to select the alarm display; the alarm symbol will be shown on the screen.
• Press and hold the [set-button] (5) to enter alarm setting mode.
• Use the [up-button] (7) or [down-button] (6) to set the Hour. Press the [set-button] (5) to confirm the Hour and enter Minute setting.
• Use the [up-button] (7) or [down-button] (6) to set the Minute. Press the [set-button] (5) to confirm the setting.
• Press any button to switch off the alarm when it goes off.

Date Setting

1. Press the [set-button] (5) to select the Date display.
2. Press and hold the [set-button] (5) to enter Date setting mode. The year number will flash.
3. Use the [up-button] (7) or [down-button] (6) to set the Year. Press the [set-button] (5) to confirm the year and enter Month setting.
4. Use the [up-button] (7) or [down-button] (6) to set the Month. Press the [set-button] (5) to confirm the Month and enter Date setting.
5. Use the [up-button] (7) or [down-button] (6) to set the date. Press the [set-button] (5) to confirm the date setting.

Snooze Mode

• When the alarm clock rings, press the [snooze-button] (1) to enter snooze mode. The alarm symbol will flash, and the alarm will sound again after 5 minutes.
• Press and hold the [snooze-button] (1) to switch off snooze for the current alarm.

Temperature Display

• Press the [set-button] (5) to select the Temperature display.
• Press the [down-button] (6) to switch between Celsius (°C) and Fahrenheit (°F).
• Press the [set-button] (5) to confirm the setting and return to the default display.

Note: This alarm clock has a memory function and saves the last data. It will adjust to the current environment temperature after one hour of standing. This alarm is not a high-precision temperature meter; the acceptable error range is ±1°C.

Specifications

• Model No.: 43398515
• Input Voltage: 5V⎓1A
• Battery: NON-REPLACEABLE CR-2032 Button cell battery for time memory function.

Important Safety Information

WARNING: BUTTON CELL BATTERIES ARE HAZARDOUS (NEW OR USED). KEEP AWAY FROM CHILDREN. BUTTON CELL BATTERIES CAN CAUSE SEVERE OR FATAL INJURIES IN 2 HOURS OR LESS IF THEY ARE SWALLOWED OR PLACED INSIDE ANY PART OF THE BODY. IF YOU SUSPECT YOUR CHILD HAS SWALLOWED OR INSERTED A BUTTON CELL BATTERY, CALL THE 24-HOUR POISONS INFORMATION CENTRE IN AUSTRALIA ON 131126 OR IN NEW ZEALAND 0800 764 766 OR CONTACT YOUR COUNTRY'S EMERGENCY DEPT. USED BATTERIES MUST BE DISPOSED OF IN THE GARBAGE OR A BATTERY RECYCLE FACILITY.

General Warnings:

• Do not dispose of the unit in fire or water.
• Never attempt to disassemble and reassemble the unit.
• Waste electrical products should not be disposed of with household waste; please recycle where facilities exist. Check with your local authority for recycling advice.
• Keep your device and all accessories out of the reach of children and animals. Small parts may cause choking or serious injury if swallowed.
• Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C). Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
• Do not allow your device to get wet; liquids can cause serious damage.
• Do not handle your device with wet hands.

12 Month Warranty

Thank you for your purchase. Your new product is warranted to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations for instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.

For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

Anko will provide a refund, repair (where possible), or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, or neglect.

Please retain your receipt as proof of purchase and contact the relevant Customer Service Centre for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to the respective Customer Services Centre.

Anko goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

MADE IN CHINA

CUSTOMER SERVICE:

• KMART AU: 1800 124 125
• KMART NZ: 0800 945 995
• TARGET AU: 1300 753 567