TLJ Access Control Systems & Electronic Lock Solutions | TLJ Access Control
Installation Guide for TLJ models including: IDENTITYTLJ, 2AZBY-IDENTITYTLJ, 2AZBYIDENTITYTLJ, Identity Lock Set, Identity Lock, Lock Set, Lock
TLJ Group Limited IDENTITYTLJ Electronic lock 2AZBY-IDENTITYTLJ 2AZBYIDENTITYTLJ identitytlj
TLJ Group Limited IDENTITYTLJ 2AZBY-IDENTITYTLJ 2AZBYIDENTITYTLJ identitytlj
File Info : application/pdf, 3 Pages, 5.26MB
DocumentDocumentInstallation guide TLJ Identity Lock set Front side Handle Back side Handle Holes drilled/machined to match TLJ fitting template exactly. Any difference will void fire test evidence 4pcs Handle Fixing Screws 4pcs Lock case & Keep screws 2pcs Lever Spindles 1pc Thumbturn spindle Over-ride Cylinder & screws Cylinder Spacer (used only with European mortise) 4 x AA Batteries Keep/Strike & Back Box Mortise Lock case Battery Cover Over-Ride Cylinder & Spacer Lever & Spindle Cable Connection Screw Location cylinder screws Mortise/Lockcase Radial and Sqaured versions available (fitting instructions exactly the same for both variants) Keep/Strike installation, including backbox. Note, 2 versions available; Squared & Radial. Squared version illustrated. TLJ Group Ltd, HQ, 68/78 Leads Road, Hull, East Yorkshire, HU7 0BY, UK Declaration of Performance can be found at www.TLJlimited.com Installation guide TLJ Identity Lock set Drilling/Routing Template (Please note drawings NOT to scale) American (squared 70mm Backset) lock case and keep (option 1) 70 2-R6 20 37.3 45 30 25 8.5 5.5 109.5 25 28 3 90 38 63 98.7 153.9 190 206 165 15 125 148.5 25 14.8 2-R6 30 1m 3 28 70.5 141 53 European (radial 60mm Backset) lock case and keep (option 2) 60 2-R6 20 37.3 45 . . 8.5 5.5 100 25 . 38 63 98.7 153.9 190 25 14.8 .. 2-R6 30 1m . . WARNING - Failure to Install as illustrated will void CE, UL, CertiFire & Warranty TLJ Group Ltd, HQ, 68/78 Leads Road, Hull, East Yorkshire, HU7 0BY, UK Declaration of Performance can be found at www.TLJlimited.com Installation guide TLJ Identity Lock set Operating Guide (Based on using the TLJ Qlite or Qcloud platform) RFID Contactless The TLJ Identity lock set can be operated via RFID (radio frequency identification) Specifically MiFare 13.56Mhz key cards, key fobs, wristbands or even sticker tags. If the RFID credential is valid when presented to the front panel it will sound a "beep" and activate the motor so the lever can be rotated downwards and in turn retracts the latch. The lock will also display a blue LED. Invalid credentials will show a red LED and blink a number of times, it is important to count the quantity of red blinks as this helps to diagnose the reason why access was rejected. "beep" TLJ Smartphone App using BLE BLE stands for Bluetooth Low Energy, the lock set allows an App (iOS and Android) to operate it. Ensure to be close by to the lock set, and that Bluetooth is enabled on the smartphone. Press the unlock icon on screen within the app, the red and blue LED will blink rapidly as the BLE key is being validated, and then if valid the same blue LED will display and a beep will sound. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. TLJ Group Ltd, HQ, 68/78 Leads Road, Hull, East Yorkshire, HU7 0BY, UK Declaration of Performance can be found at www.TLJlimited.com