Instruction Manual for STOLTZEN models including: HDP-WPC10, CP100, CP100 10 Inch Control Processor, CP100, 10 Inch Control Processor, Control Processor, Processor
22 mag 2024 — The programmable touch screen control panel is designed to be utilized in the sectors of automated office system, multi-media room and smart home. With.
Stoltzen Poseidon CP100 10" Control Processor VER 1.0 Thank you for purchasing this product For optimal performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction......................................................................................... 1 2. Features............................................................................................... 1 3. Package Contents.............................................................................. 1 4. Specifications. .................................................................................... 2 5. Operation Controls and Functions. ................................................... 3 6. Application Example.......................................................................... 5 1. Introduction The programmable touch screen control panel is designed to be utilized in the sectors of automated office system, multi-media room and smart home. With a programmable interactive user interface over configuration protocols, the integrated system provides intelligent networking service. The control panel is equipped with a capacitive touch screen with a resolution of 1280*800, and it supports one RS-485 serial port. It is used in a diverse range of installations and applications across industries including multi-media conference rooms, multi-functional halls, training centers, show room, broadcasting studios and industrial automation. 2. Features ARM Cortex-A53 architecture 1.8Ghz main frequency Android 9.0 system, 8GB Emmc Flash, 2GB DDR4 RAM 1280*800 (16:10) resolution, desktop screen design One machine with two modes, can be used as touch screen central control or user terminal Support one RS-485 communication serial port, which is capable of configuring 8 baud rates in the range of 2400-115200bps Support access to the host system management web page with a password Compliant with industry standard network communication protocols (TCP/IP, Http, UDP, Websocket) With 1 Gigabit network port, the highest rate up to 1G/bps Support POE function or independent DC 24V/1A power supply Interface and function configuration via central control software Support remote control, remote O&M, online upgrade Support factory reset 3. Package Contents 1 × Programmable Touch Screen Control Panel (Desktop) 1 × 3pin-3.81mm Phoenix Connectors (male) 1 × 24V 1A Multinational Power Supply (2pin-3.81mm Phoenix Connector) 1 × User Manual -1- 4. Specifications Technical CPU ARM Cortex-A53 1.8GHz Operation System Android 9 RAM Flash Memory 2GB DDR4 RAM 8GB EMMC Flash Resolution Touch Type 1280*800 Capacitive Touch Screen Connection RS-485 LAN/POE 1 × 3-pin Phoenix Connectors, for RS-485 serial data communication 1 standard 10M/100M/1000M Ethernet RJ45 interface, supporting POE function POWER DEBUG 1 × 2-pin Phoenix Connectors, for power supply 1 × Micro USB, system debugging port Mechanical Housing Color Front Panel -- Touch Screen; Rear Case -- Aluminum Alloys Front Panel -- Black; Rear Case -- Apple Gray Dimension Weight 245.4mm (L) × 164mm (W) × 27mm (D) 887g Power Supply 24V DC/1A or POE Power Consumption 6W Operation Temperature 0°C ~ 40°C / 32°F ~ 104°F Relative Humidity 10~90% RH (non-condensing) -2- 5. Operation Controls and Functions No. Name 1 Touch Screen 2 POWER button 3 RESET button Function Description Capacitive touch screen. The user control interface can be configured through the IDE tool. Used for system power on/off, screen off or wake-up. Reboot: After the device boots up, press and hold the RESET button for more than 1s less than 5s, then release it, the device will reboot. The device won't upload the user projects after rebooting. Reset: After the device boots up, press and hold the RESET button for more than 5s, then release it, the device will reset the user configuration information, the IP will be restored to DHCP state, the login password of the management page will be initialized to "admin", the device time will be initialized to automatic acquisition mode, but user projects won't be deleted by factory initialization. -3- No. Name Function Description 4 DEBUG port Micro USB port. The reserved port for system debugging. 5 LAN/POE port Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & downloading, network communication and debugging. The control panel boots up with DHCP enabled by default. After powering on, when the control panel connects to a network where there is no router present to assign IP addresses, the control panel will take the pre-set IP address: 192.168.0.101. If there is a router present on the same network, the router will assign an IP address to the control panel in three minutes and the pre-set IP address will be invalid. Note: When the control panel is DHCP enabled after power on, the router (if connected to the same network) will assign an IP address to the control panel. If network is disconnected at this time, the control panel won't be able to pre-set an IP address and its IP address would be 0.0.0.0. If a pre-set IP address is needed, you need to power off the control panel and then power it on again. If it is in static IP mode after power on, the control panel won't preset an IP address either. If there is no router present, you can connect your PC to the LAN port of the control panel and modify the PC's IP address in the network segment of 192.168.0.X, then the PC will pre-set an IP address to the control panel in three minutes for data communication. Programmable RS-485 serial port, which is a 3-pin phoenix connector (male), compliant with RS-485 communication 6 RS-485 port protocol, and capable of configuring 8 baud rates in the range of 2400-115200bps. The pin-outs of the RS-485 ports are PIN1 for A, PIN2 for B, and PIN3 for GND. 7 POWER port The power input port (2-PIN phoenix connectors), used for connecting with external 24V DC power supply. -4- 6. Application Example Windows Touch Screen Control Panel DVD Laptop IR HDMI HDMI iPad Android Router CAT Cable CAT Cable Cloud Server Switch IP Encoder CAT Cable CAT Cable CAT Cable IP Encoder CAT Cable CAT Cable CAT Cable IP Controller Light 2 IP Decoder HDMI RS-232 RS-232 Relay Projector Light Modulator Light 1 Network Port Expander IP Decoder IP Decoder Curtain HDMI HDMI TV TV -5-Microsoft Word for Microsoft 365