Instructions for MERCURY models including: RT-N10E, Wireless N150 Router, N150 Router, RT-N10E, Router

Oliver Hooper

Asus RT-N10E Fibre Setup | Mercury

Jun 13, 2022 — Using your own router? No worries, we've got you covered! Log into the gateway: 1. Ensure your device is connected to the Router (preferably via cable).

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 2 Pages, 118.22KB

Asus RT-N10E Fibre Setup
Using your own router? No worries, we've got you covered! Log into the gateway:
1. Ensure your device is connected to the Router (preferably via cable) 2. Open a web browser 3. Type the following in the address bar at the top: 192.168.1.1 4. Default Username: admin 5. Default Password: admin
This should then give access to the router's user interface
How to add correct settings for the Mercury network: From the left menu select: WAN. The Internet Connection page displays. Ensure the following settings are changed:
1. WAN Connection Type: PPPoE 2. Enable UPnP: Yes 3. Get the WAN IP automatically: Yes 4. Connect to DNS Server automatically: Yes 5. PPP Username: (your mercury acct number)@mercurybroadband.co.nz 6. Password: password123 7. Service Name: Leave blank 8. Connection Type: Continuous 9. MTU: 1492 10. Connect to DNS Server automatically: Yes 11. Select ISP: Manual 12. Internet: VID - 10, PRIO ­ 0 13. The rest can remain unchanged 14. Click: Apply



References