User Guide for GE imagination models including: GU10 Precision Colours Bulb, GU10, Precision Colours Bulb
Seamless Setup. 1. Plug in your. Google Nest device. ( smart speaker ). 3. Download the. Google Home. App and follow the prompts to easily set up.
imagine connected smart home Get started with your new GE imagine Lights works with Hey Google seamless setup with Google Home app Seamless Setup 1 Plug in your Google Nest device ( smart speaker ) 2 In the same room, fit the bulb and turn on the light. The light will start blinking and waiting to be added in Google Home App 3 Download the Google Home App and follow the prompts to easily set up 4 Set up smart light tap here 5 Pick smart light to set up tap here 6 Select smart light and tap Set up tap here 7 Choose room and tap Next tap here 8 Create a unique name and tap Next tap here tap here 9 Your Light is now ready and tap Done tap here Now your light and room is on App and ready to be controlled tap here Control your light, power On & Off, dim your light Down & Up, change colours tap here tap here tap here Control your lights with your voice Support your circadian rhythm sleep / wake cycle Control your lights with your voice Set up Routines for your lights Create ambience in your home "Hey Google, turn on the light" Explore Google Home App with Routines tap here Troubleshooting Problem: If there's no blinking from light after powering on. Solution: Please follow below Factory Reset process. Turn power On & Off 5 times then leave on, each time using light switch: 1) On & Off, 2) On & Off, 3) On & Off, 4) On & Off, 5) On & Off, then On again light should now start to blink After performing the above On & Off cycle, if light does not blink, please redo the above On & Off cycle ( factory reset ) again. Confirm the light blinks and go to step 4 Problem: The light can be added successfully, but cannot be controlled. Solution: Please follow below to reboot the Google Home. Tap the to reboot. tap here tap here tap here imagine connected smart home This GE imagine connected smart home LED bulb features and controls are performed via the App or Voice only. Brightness or dimming controls can only be performed via the App or Voice as outlined in the quick start guide supplied with your bulb. Note: This smart LED bulb is not compatible with the use of any external dimmer. Use in Dry Locations only Australian / New Zealand Regulatory Compliance Mark and Responsible supplier number E6 GE is a trademark of General Electric Company and is under license by Light Source Solutions and Light Source Solutions New Zealand Ltd. of 140 Fulton Drive Derrimut Vic 3026 Australia. imagine connected smart home Thank you for choosing GE imagine. Enjoy your new smart lighting experienceAdobe PDF library 10.01 Adobe Illustrator CS6 (Windows)