Instruction Manual for iHOME models including: B14A, EMOB14A, Ri-B14BM.EXV1 M1 Bluetooth Earbuds, M1 Bluetooth Earbuds, Bluetooth Earbuds, Earbuds

XX-B14 IB v7 041521

User Manual

SDI Technologies Inc. B14A EMOB14A EMOB14A b14a

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=5299227
XX-B14 IB (English)
Size: 120 x 150 mm Printing color: Black (1C + 1C) Material: 85 gsm WF paper
Apr. 15, 2021

FRONT

CHARGING THE EARBUDS

Left MFB

Right MFB

Model: Ri-BB1lu4eBtMoo.tEhXEVa1rb, uMd1s
CHARGE BEFORE USE
USB AC adaptor (not included)

USB-C charging cable
(included)
POWER ON/OFF
- Press and hold either Multi-Function Button (MFB) for 2 seconds to turn the earbuds ON. - Press and hold either Multi-Function Button for 5 seconds to turn the earbuds OFF.

BLUETOOTH PAIRING
- When the earbuds are ON, they will automatically enter pairing mode. - Select `ekids B14' on your Bluetooth-enabled device to connect. - A voice prompt will sound to indicate pairing is complete. Earbuds will automatically
connect to your Bluetooth device whenever it is in range. - To reset Bluetooth, press and hold the MFB (left or right) for 10 seconds.

MULTI-FUNCTION BUTTON

Speakerphone

Answer call/End Short press MFB

Reject call

Long press MFB

Voice Assistant

ON/OFF

Press MFB 3x

LED INDICATORS

Bluetooth Audio Play/Pause Short press MFB Volume Up Press LEFT MFB for 2 sec Volume Down Press RIGHT MFB for 2 sec Next Track Press LEFT MFB 2x Previous Track Press RIGHT MFB 2x

Earbud Charging

Charging

Solid Blue LED

Fully charged LED OFF

Case Charging

Charging

Flashing Red LED

Fully charged Solid Red LED

To prevent possible hearing damage, do not listen at high volume levels for long periods.

BACK

FCC Information

FCC ID : EMOB14A IC : 986B-B14A HVIN : B14a

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. · Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. · NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B) / NMB-3(B)

ISED statements
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modifications not expressly approved by the party respoOsible for compliance could void the user's authority to operate the equipment. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformité. Tout changement ou modification non expressément approuvé par la partie responsable de la conformité pourrait annuler le droit de l'utilidateur à utiliser l'équipement.
WARNING: Earbuds and case may present a choking hazard or cause other injury to small children. Keep away from small children. For your safety, do not use earbuds if they would prevent you from hearing warning sounds, such as while riding a bike, crossing the street, etc.
THIS IS NOT A TOY.
ONE YEAR LIMITED WARRANTY For product support and warranty please visit: www.ekids.com/support
Questions? Visit www.ekids.com

B14_041521-A

©2021 SDI Technologies, Inc. All Rights Reserved. iHome is a registered trademark of SDI Technologies Inc., used under license.
Printed in China


Adobe PDF library 15.00 Adobe Illustrator 24.0 (Macintosh)