Manuals+
KNIPEX HVAC & Plumbing Tools Catalog

KNIPEX HVAC & Plumbing Catalog

KNIPEX engineers pliers for masters of craft who - like us - refuse to compromise. Born from a history of German innovation and unmatched quality, we know: craft is honed, trust is earned, and precision defines excellence.

TubiX® Pipe Cutters

QuickLock single-handed quick adjustment enables the cutting wheel to slide to any pipe diameter with a single press of the thumb.

  • Cuts copper, brass, stainless, and high-grade steel quickly and easily.
  • High-quality needle bearings enable the cutting wheel and four guide rollers to operate with ease.
  • Cutting wheel made of high-grade ball-bearing steel.
  • Spare cutting wheel stored in the handle for quick replacement.
KNIPEX # Inch Ø inch Ø mm
90 31 01 SBA 3 1/8 – 1 1/8 3 – 30
90 31 02 SBA 7 1/4 1/4 – 1 3/8 6 – 35
90 31 03 BKA 10 1/4 1/4 – 3 6 – 76
90 31 03 E01 Replacement deburring tool for 90 31 03 BKA
90 39 02 V01 Replacement cutting wheel and needle bearing, works on all three tools
90 39 02 V02 Replacement deburring tool for 90 31 02 SBA
90 39 02 V03 Replacement set of 5 cutting wheels and needle bearings, works on all three tools

Pipe Cutters for Plastic Pipes and Hoses

The wide support base aligns the hose at a perfect right angle to the blade.

Pipe Cutters

  • Pipe and hose cutters that cleanly cut a variety of materials.
  • Opening spring and locking device.
  • Handles made of fiberglass-reinforced plastic.
  • Not suitable for cutting cables.
  • Blade made of high-strength special grade steel, oil-hardened and tempered.
KNIPEX # Material Type Inch Ø inch
90 10 185 pneumatic 7 1/4 3/16 – 3/4
90 20 185 flexible hose and PVC 7 1/4 up to 1
90 29 01 Spare blade for 90 10 185 and 90 25 185
90 29 185 Spare blade for 90 20 185

BiX Pipe Cutter

  • Cuts pipes cleanly without shavings.
  • Blade unit can be turned 180 degrees.
  • Includes two spare blades integrated in the tool.
KNIPEX # Material Type Inch Ø inch
90 22 10 BKA thin walled PVC 2 3/4 3/4 – 2
90 22 10 E01 Spare blade for 90 22 10 BKA

Pipe Cutters for Plastic Composite Pipes

Pipe Cutters

  • Features an opening spring and locking lever.
  • The rotating cutting wheel penetrates the pipe effortlessly with minimal deformation.
  • For cutting aluminum composite and plastic conduit pipes.
  • Allows for very short cuts.
KNIPEX # Material Type Inch Cutting Capacity Ø inch
90 25 25 aluminum composite and plastic conduit 8 1/4 up to 1
90 25 40 thick walled plastic and composite 8 1/4 1 – 1 37/64
90 25 25 E01 Spare cutting wheel for 90 25 25
90 29 15 Calibration arbor
90 29 40 Spare blade for 90 25 40

Cobra® Water Pump Pliers

  • Push-button mechanism – adjust once and it stays.
  • Self-locking on pipes and nuts means no slipping off the workpiece.
  • Gripping surface with special hardened teeth (approx. 61 HRC) is wear resistant and grips any shaped object – round, square, hex or flat.
  • Fine-adjustment provides an optimum adjustment to different size workpieces.
  • Pinch guard prevents operators’ fingers from being pinched.
KNIPEX # Description Inch Capacity Ø inch Adjustment Positions Handles
87 00 100 SBA Cobra XS Pliers 4 1 11 texturized
87 01 125 SBA Cobra Pliers 5 1 1/16 13 non-slip plastic
87 01 150 SBA Cobra Pliers 6 1 1/4 11 non-slip plastic
87 01 180 SBA Cobra Pliers 7 1/4 1 1/2 18 non-slip plastic
87 01 250 SBA Cobra Pliers 10 2 25 non-slip plastic
87 02 250 SBA Cobra Pliers 10 2 25 slim comfort grip
87 21 250 SBA Cobra QuickSet Pliers 10 2 25 non-slip plastic
87 01 300 SBA Cobra Pliers 12 2 3/4 30 non-slip plastic
87 02 300 SBA Cobra Pliers 12 2 3/4 30 comfort grip
87 21 300 SBA Cobra QuickSet Pliers 12 2 3/4 25 non-slip plastic
87 01 400 SBA Cobra XL Pliers 16 3 3/4 27 plastic dipped
87 01 560 US Cobra XXL Pliers 22 4 3/4 20 plastic dipped

Alligator® Water Pump Pliers

  • Self-gripping jaw design won't slip.
  • Gripping surface with special hardened teeth (approx. 61 HRC) is wear resistant and grips any shaped object – round, square, hex or flat.
  • Easy access to the workpiece due to slim size in the head and joint area.
  • Box-joint design provides directional stability.
  • Pinch guard prevents operators’ fingers from being pinched.

Grip types available: Round, Square, Hex, Flat.

KNIPEX # Inch Capacity Ø inch Adjustment Positions Handles
88 01 180 SBA 7 1/4 1 1/2 9 non-slip plastic
88 02 180 SBA 7 1/4 1 1/2 9 comfort grip
88 01 250 SBA 10 2 9 non-slip plastic
88 02 250 SBA 10 2 9 slim comfort grip
88 01 300 SBA 12 2 3/4 9 non-slip plastic
88 02 300 SBA 12 2 3/4 9 comfort grip
88 01 400 SBA 16 3 3/4 11 plastic dipped

Pliers Wrenches

  • Replaces a full set of open-end wrenches.
  • Available in a black finish or chrome.
  • Smooth jaws for damage-free installation of plated fittings – working directly on chrome.
  • Excellent for gripping, holding, pressing and bending.
  • Laser-etched scale allows the wrench opening to be set before gripping onto workpiece.
  • Parallel jaws allow infinitely variable gripping of all widths to the specified maximum size.
KNIPEX # Description Finish Inch Capacity Ø inch Adjustment Positions Handles
86 01 180 SBA Pliers Wrench black 7 1/4 1 1/2 15 non-slip plastic
86 01 250 SBA Pliers Wrench black 10 2 19 non-slip plastic
86 01 300 SBA Pliers Wrench black 12 2 1/2 24 non-slip plastic
86 04 100 SBA Pliers Wrench chrome 4 3/4 10 texturized
86 03 125 SBA Pliers Wrench chrome 5 7/8 11 plastic dipped
86 03 150 SBA Pliers Wrench chrome 6 1 14 plastic dipped
86 03 180 SBA Pliers Wrench chrome 7 1/4 1 1/2 15 plastic dipped
86 05 180 SBA Pliers Wrench chrome 7 1/4 1 1/2 15 comfort grip
86 03 250 SBA Pliers Wrench chrome 10 2 19 plastic dipped
86 05 250 SBA Pliers Wrench chrome 10 2 19 slim comfort grip
86 03 300 SBA Pliers Wrench chrome 12 2 1/2 24 plastic dipped
86 03 400 SBA XL Pliers Wrench chrome 16 3 3/8 25 plastic dipped

Jaw Protectors

  • Smooth plastic upper and lower jaw protectors easily snap into place and prevent damage to workpieces.
  • Each set includes 3 pairs of protective jaws.
  • Non-marring – offers an extra layer of protection for the Pliers Wrench.
  • Cobra® Pliers jaw protectors have a smooth gripping surface and cover all the teeth.

Jaw Protectors for Pliers Wrenches

KNIPEX # Description Compatibility
86 09 180 V01 for 7 1/4" Pliers Wrench fits Pliers Wrenches from 2019 – present
86 09 250 V01 for 10" Pliers Wrench fits Pliers Wrenches from 2018 – present
86 09 300 V01 for 12" Pliers Wrench fits Pliers Wrenches from 2020 – present

Easy to install – Just snap the upper and lower jaws onto the pliers wrench jaws.

Non-marring – offers an extra layer of protection for the pliers wrench.

Jaw Protectors for Cobra Pliers

KNIPEX # Description Compatibility
87 09 180 V01 for 7 1/4" Cobra Pliers fits Cobra Pliers from 2010 – present
87 09 250 V01 for 10" Cobra Pliers fits Cobra Pliers from 2007 – present
87 09 300 V01 for 12" Cobra Pliers fits Cobra Pliers from 2008 – present

Easily snaps onto gripping jaws of the 7 1/4", 10" and 12" Cobra Pliers.

The protective jaws have a smooth gripping surface and cover all the teeth on the tool.

Pipe and Connector Pliers

  • Once this tool is set it stays in that position without movement until you change it, making it the ideal tool for repetitive work.
  • The rounded jaws grab ahold of round pipes and connectors up to 3" diameter.
  • Ideal for tightening and loosening siphon screw connections, plastic pipe fittings and round union nuts.
  • Features innovative plastic inserts consisting of dual component materials: soft blue layer and hard red layer.
  • The soft jaw version is an ideal tool for plumbing applications.
  • Replaceable plastic jaws for soft surfaces with diameters up to 3".
  • For gentle loosening of hoses on nozzles.
  • 25 adjustment positions, box-joint design for high stability.
KNIPEX # Description Inch Capacity Ø inch Adjustment Positions Handles
81 01 250 SBA serrated jaws 10 1 – 3 5/32 25 non-slip plastic
81 11 250 SBA plastic jaws 10 3/8 – 3 25 non-slip plastic
81 19 250 V01 2 pairs of original hard plastic inserts for 81 11 250 SBA
81 19 250 V02 2 pairs of dual (soft and hard) component inserts for 81 11 250 SBA

TwinGrip Pliers

  • Easily grip stripped screw and bolts with the front and side gripping areas.
  • Push-button adjustment – adjust once and it stays.
  • Slim head design for working in confined spaces.
  • Large front and side gripping capacities from 1/8" to 1 1/16".
  • Reliable gripping of flat workpieces due to the three-point system.
  • Pinch guard prevents operators' fingers from being pinched.
  • Durable construction due to box-joint design.
  • Gripping surfaces with special hardened teeth (approx. 61 HRC).
KNIPEX # Inch Capacity Ø inch Adjustment Positions Handles
82 01 150 SBA 6 1/8 – 5/8 3 non-slip plastic
82 02 150 SBA 6 1/8 – 5/8 3 KNIPEXTEND comfort handles
82 01 200 SBA 8 5/32 – 7/8 5 non-slip plastic
82 02 200 SBA 8 5/32 – 7/8 5 KNIPEXTEND comfort handles
82 01 250 SBA 10 3/16 – 1 1/16 7 non-slip plastic
82 02 250 SBA 10 3/16 – 1 1/16 7 KNIPEXTEND comfort handles

Includes: 3 Pc TwinGrip Set (82 01 150, 82 01 200 and 82 01 250).

Also features TetheredTool Clips and ColorCoded Clips.

Push-Button Swedish Pipe Wrenches

  • Rapid adjustment design with push-button adjustment for quick and precise gripping.
  • No unintentional shifting of the pliers handles and less effort required due to self-locking action.
  • The S-Type jaw provides a 3-contact point grip that securely handles round, square, hex and flat workpieces without slipping.
  • I-Beam handle style provides more strength and operating stability than a traditional pipe wrench style.
  • The handles stay close together and help to maneuver in confined areas even when the jaw capacity is at its max.
KNIPEX # Inch Capacity Ø inch Handles
83 61 010 13 1 5/8 plastic dipped
83 61 015 16 1/2 2 3/8 plastic dipped
83 61 020 22 2 3/4 plastic dipped
83 60 010 13 1 5/8 -
83 60 015 16 1/2 2 3/8 -
83 60 020 22 2 3/4 -

Grip types shown: Round, Hex.

Swedish Pipe Wrenches

  • Three types of head styles available: 45°, 90° and S-Type.
  • The 45° and 90° head styles permit access into tight and confining workspaces.
  • The S-Type jaw provides a 3-contact point grip that securely handles round, square, hex and flat workpieces without slipping.
  • Serrated adjusting nut with integrated guard prevents unthreading.
  • I-Beam handle style provides more strength and operating stability than a traditional pipe wrench style.
  • The handles stay close together and help to maneuver in confined areas even when the jaw capacity is at its max.

45° Swedish Pipe Wrenches

KNIPEX # Inch Capacity Ø inch
83 20 010 12 1/2 1 5/8
83 20 015 17 2 3/8
83 20 020 22 1/2 2 3/4

90° Swedish Pipe Wrenches

KNIPEX # Inch Capacity Ø inch
83 10 010 12 1/2 1 5/8
83 10 015 17 1/2 2 3/8
83 10 020 22 2 3/4

S-Type Swedish Pipe Wrenches

KNIPEX # Inch Capacity Ø inch
83 30 010 13 1 5/8
83 30 015 17 2 3/8

Grip types shown: Hex, Square, Round.

Gripping Pliers

  • Tightly holds round or flat material.
  • Heavy-duty tools for long life.
  • Adjustment screw and release lever for easy use.
  • Perfect for one-handed operations.
  • High clamping pressure due to toggle lever action.
  • Universal Grip Pliers (40 14 250 SBA) has a unique bottom jaw that pivots automatically to adjust to any shape - flat, round, square and hex.
  • Long Nose Grip Pliers (41 44 200) has a thin head for narrow areas and non-serrated gripping area for pinching off hoses.
KNIPEX # Inch Gripping Capacity Ø inch Gripping Capacity Ø inch Gripping Capacity Ø inch
40 04 180 SBA 7 1/4 1 3/8 1 1 1/4
40 04 250 10 1 3/8 1 3/16 1 1/4
40 14 250 SBA 10 1 11/16 1 5/8 1 3/4
41 14 250 10 1 27/64 1 27/64 -
41 24 225 SBA 9 1 - 1 3/16
41 44 200 8 13/16 13/16 1 3/16

Grip types shown: Hex, Round, Flat.

Control Cabinet Keys

TwinKey Universal Control Cabinet Key

  • 10 Profiles, 2 crosses, 1 key – for all common locking systems.
  • For the actuation of locking systems: heating and sanitation, air conditioning, electro technology, gas and water supply and shut-off systems.
KNIPEX # Description Inch mm mm mm mm mm
00 11 01 TwinKey Universal Control Cabinet Key 3 3/4 5 / 6 7 / 8 9 / 10 11 7 / 8 / 9 / 10 / 11 / 12 3 – 5 6 6 – 10

Control Cabinet and Universal Keys

  • Control cabinet keys for all standard cabinets and shut-off systems.
  • Multifunctional keys for actuation of locking systems to use with control cabinets and shut-off systems for the supply of gas, water and electricity.

Control Cabinet Keys

KNIPEX # Description Inch mm mm mm mm
00 11 02 Control Cabinet Key 1 3/4 5 / 6 / 7 – 8 7 / 8 – 9 3 – 5 -
00 11 03 Control Cabinet Key 3 5/6/7–8 7/8–9 3–5 -
00 11 04 Profi-Key Control Cabinet Key 3 1/2 5 / 7 / 8 9 – 10 6 – 10 -

Universal Keys

KNIPEX # Description Inch mm mm mm mm
00 11 06 Universal Control Cabinet Key 3 1/2 5 / 6 / 7 – 8 / 9 – 10 7 – 8 / 9 – 10 / 11 3 – 5 6
00 11 06 V01 Universal Key Construction 3 1/2 5 / 6 / 7 – 8 / 9 – 10 7 – 8 / 9 – 10 / 11 3 – 5 6
00 11 06 V03 Control Cabinet Key Doublejoint 5 5 / 6 / 7 – 8 7 / 8 – 9 3 – 5 6
00 11 07 Universal Control Cabinet Key - Pen Style 6 1/2 5 / 6 / 8 9 3 – 5 6

CoBolt® Compact Bolt Cutters

  • Exceptional cutting performance: 60% less effort compared to conventional high leverage diagonal cutters.
  • Induction hardened cutting edges (approx. 64 HRC) for cutting soft, hard and piano wire.
  • Cuts materials like bolts, nails, rivets, etc.
  • Micro-structured cutting edges allow easy cutting of large cross-sections.
  • Gripping surface below the joint for gripping and pulling wires.
  • Notch in blade allows easier cutting of thicker objects.
KNIPEX # Inch Style Cutting Capacity Ø inch Cutting Capacity Ø inch Cutting Capacity Ø inch Cutting Capacity Ø inch Handles
71 01 160 SBA 6 1/4 straight 13/64 11/64 1/8 1/8 plastic dipped
71 31 160 SBA 6 1/4 straight w/ notch 13/64 3/16 9/64 1/8 plastic dipped
71 01 200 SBA 8 straight 1/4 13/64 5/32 9/64 plastic dipped
71 02 200 SBA 8 straight 1/4 13/64 5/32 9/64 slim comfort grip
71 12 200 SBA 8 straight w/ spring 1/4 13/64 5/32 9/64 slim comfort grip
71 22 200 SBA 8 20° angled w/ spring 1/4 13/64 5/32 9/64 slim comfort grip
71 31 200 SBA 8 straight w/ notch 1/4 13/64 5/32 9/64 plastic dipped
71 32 200 8 straight w/ notch and spring 1/4 13/64 5/32 9/64 slim comfort grip
71 41 200 SBA 8 20° angled w/ notch 1/4 13/64 5/32 9/64 plastic dipped
71 01 250 SBA 10 straight - 7/32 5/32 5/32 plastic dipped
71 31 250 SBA 10 straight w/ notch - 1/4 11/64 11/64 plastic dipped

For cutting soft wire, medium hard wire, hard wire, and piano wire.

Large Bolt Cutters

  • High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio.
  • Cutting capacity of steel up to 48 HRC.
  • Robust cutting edges with a hardness of (approx. 62 HRC).
  • Forged-on stopper with comfortable shock absorber.
  • Good access due to very flat construction of head and joint area.
  • Precise adjustment by cam bolt.
  • Blade is made of chrome vanadium heavy-duty steel; forged, multi-stage oil-hardened. Joint is made of special tool steel, forged.
KNIPEX # Inch Cutting Capacity HRC 19 Ø inch Cutting Capacity HRC 40 Ø inch Cutting Capacity HRC 48 Ø inch Handles
71 72 460 18 1/4 5/16 15/64 13/64 multi-component
71 72 610 24 23/64 5/16 9/32 multi-component
71 72 760 30 7/16 23/64 5/16 multi-component
71 72 910 35 3/4 1/2 25/64 23/64 multi-component

Electronics Super Knips® and Diagonal Flush Cutters for Plastic

Electronics Super Knips

  • Precision pliers for ultra-fine cutting work for plastics, soft wires and cable ties.
  • Very precisely ground and sharp cutting edges without bevel for a flush cut.
KNIPEX # Inch Style Handles
78 03 125 5 straight multi-component
78 61 125 SBA 5 straight multi-component
78 03 140 SBA 5 1/2 straight multi-component
78 61 140 5 1/2 straight multi-component

Diagonal Flush Cutters for Plastic

  • Provides a fully flush cut when cutting tie-wraps, plastic and soft metals.
  • Opening spring for easy repetitive work.
KNIPEX # Inch Style Handles
72 01 140 5 1/2 straight plastic dipped
72 01 160 6 1/4 straight plastic dipped
72 01 180 7 1/4 straight plastic dipped
72 11 160 6 1/4 45° plastic dipped
72 21 160 6 1/4 85° plastic dipped

High Leverage Diagonal Cutters

  • Precision matched, induction hardened cutting edges cut soft and hard wire.
  • Heavy-duty, fixed forged on axle rivet joint ensures smooth operation.
  • High cutting performance with minimum effort due to optimum coordination of the cutting edge angle, transmission ratio and handle shape.
  • No break-in period needed – smooth operation from the start.
KNIPEX # Inch Cutting Capacity Ø inch Cutting Capacity Ø inch Cutting Capacity Ø inch Handles
74 01 140 5 1/2 1/8 5/64 1/16 plastic dipped
74 02 140 5 1/2 1/8 5/64 1/16 comfort grip
74 01 160 SBA 6 1/4 9/64 3/32 5/64 plastic dipped
74 02 160 6 1/4 9/64 3/32 5/64 comfort grip
74 01 180 SBA 7 1/4 5/32 7/64 3/32 plastic dipped
74 02 180 7 1/4 5/32 7/64 3/32 KNIPEXTEND comfort handles
74 01 200 SBA 8 11/64 1/8 3/32 plastic dipped
74 02 200 SBA 8 11/64 1/8 3/32 KNIPEXTEND comfort handles
74 01 250 SBA 10 3/16 9/64 1/8 plastic dipped
74 02 250 SBA 10 3/16 9/64 1/8 comfort grip

For medium hard wire, hard wire, and piano wire.

Features KNIPEXTEND TetheredTool Clips and ColorCoded Clips. See page 27 for more information.

High Leverage Combination and Lineman's Pliers

High Leverage Combination Pliers

  • Easier cutting, powerful gripping, bending and pulling.
  • Long cutting edges for thicker cables.
  • Cutting edge hardness (approx. 63 HRC) for heavy-duty cutting.
  • Gripping zones for flat and round material for a variety of uses.
KNIPEX # Inch Cutting Capacity Ø inch Cutting Capacity Ø inch Cutting Capacity Ø inch Handles
02 01 200 SBA 8 7/64 3/32 1/2 plastic dipped
02 02 200 SBA 8 7/64 3/32 1/2 comfort grip
02 01 225 SBA 9 1/8 3/32 35/64 plastic dipped
02 02 225 SBA 9 1/8 3/32 35/64 KNIPEXTEND comfort handles

High Leverage Lineman's Pliers

  • High leverage design requires 50% less effort compared to conventional combination pliers due to an optimized transmission ratio.
  • Effective cross-hatched knurled gripping zone in the jaws for strong gripping and pulling.
  • Serrated gripping zone below the joint for powerful leverage.
  • Cutting edges for soft and hard wire, nails and piano wire, cutting edge hardness (approx. 64 HRC).
KNIPEX # Inch Cutting Capacity Ø inch Cutting Capacity Ø inch Handles
09 01 240 SBA 9 1/2 3/16 1/8 plastic dipped
09 02 240 SBA 9 1/2 3/16 1/8 comfort grip

For hard wire, piano wire, Cu + Al multi-conductor cable, solid and multi-stranded.

Long Nose Pliers and Needle-Nose Combination Pliers

Long Nose Pliers

  • Elastic precision tips will not deform or bend and spring back into place.
  • Serrated jaws provide a strong grip.
  • Half-round, tapered jaws provide a long, thin and deep reach.

Long Nose Pliers w/Cutter

KNIPEX # Style Inch Cutting Capacity Ø inch Cutting Capacity Ø inch Handles
26 11 200 SBA straight 8 1/8 3/32 plastic dipped
26 12 200 SBA straight 8 1/8 3/32 KNIPEXTEND comfort handles

Angled Nose Pliers w/Cutter

KNIPEX # Style Inch Cutting Capacity Ø inch Cutting Capacity Ø inch Handles
26 21 200 SBA 40° angled 8 1/8 3/32 plastic dipped
26 22 200 SBA 40° angled 8 1/8 3/32 KNIPEXTEND comfort handles

Needle-Nose Combination Pliers

  • For use when working in confined areas due to the slim head design and pointed jaws (anti-twist).
  • Special convex contour provides a stable 3-point contact for secure gripping of flat parts.
  • Secure 3-point gripping on flat workpieces and stable, flexible tips.
KNIPEX # Inch Cutting Capacity Ø inch Cutting Capacity Ø inch Cutting Capacity Ø inch Handles
08 21 145 SBA 5 3/4 1/8 5/64 5/16 plastic dipped
08 22 145 SBA 5 3/4 1/8 5/64 5/16 KNIPEXTEND comfort handles
08 21 185 SBA 7 1/4 5/32 1/8 1/2 plastic dipped
08 22 185 SBA 7 1/4 5/32 1/8 1/2 KNIPEXTEND comfort handles

For medium hard wire, hard wire, Cu + Al multi-conductor cable, solid and multi-stranded.

CutiX Universal Snap Knife

  • Innovative stabilization bar keeps the blade from bending for quicker cutting.
  • Two separate sliders – one for blade and one for stabilization bar.
  • Uses standard 18 mm snap-off blades.
  • Blades can be easily replaced without tools with just a push of the button.
  • Lightweight magnesium housing with non-slip gripping surfaces.
  • Two spare blades stored in the handle.
  • Tether attachment point can be used with the KNIPEX Tethered Tools System.
KNIPEX # Inch Housing
90 10 165 BKA 6 1/2 magnesium
90 10 165 E01 - -
90 10 165 E02 - -

Flat sliders prevent unintentional advancement of blade. Two spare blades stored in the handle.

Electrical Installation Pliers

Forged Wire Strippers

  • Cuts 6-32 and 8-32 screws without threading.
  • Strips 10 to 20 AWG – both solid and stranded wire.
  • Shear cutting blades cut NM-B, battery cable BX and MC.
KNIPEX # Inch Stripping Capacity Ø inch Handles
13 71 8 SBA 8 10 to 20 AWG 1/2 plastic dipped
13 72 8 SBA 8 10 to 20 AWG 1/2 comfort grip

Electrician's Pliers

  • 4 Functions in one pliers – grips, cuts, strips and crimps.
  • For cutting soft, medium, and hard wire.

4-in-1 Electrician's Pliers

KNIPEX # Inch Stripping Capacity Ø inch Ø inch Crimping Handles
13 01 614 SBA 6 1/4 10/12/14 AWG 3/32 1/16 14-20 AWG plastic dipped

Electrical Installation Pliers

  • 6 Functions in one pliers – grips, cuts, strips, bends, crimps and deburrs.
  • Stripping holes for 12 to 14 AWG.
  • Crimp die for end sleeves (ferrules) 12 to 20 AWG.

6-in-1 Electrical Installation Pliers

KNIPEX # Inch Stripping Capacity Ø inch Ø inch Crimping Handles
13 81 8 SBA 8 12 and 14 AWG 9/16 5/32 12-20 AWG plastic dipped

For medium hard wire, hard wire, Cu + Al multi-conductor cable, solid and multi-stranded.

HVAC & Plumbing Essentials

Anvil Shear

  • For cutting soft material such as rubber, leather and hoses.
  • Opening spring and locking device.
  • Tool body constructed of rolled and oil-hardened tool steel.
KNIPEX # Inch Pliers Cutting Capacity Ø inch Handles
94 55 200 8 chrome plated round material up to 1, flat material up to 1 1/2 plastic coated
94 59 200 01 - spare blade for 94 55 200 - -

Electrician's Shears

  • Precision-ground blades with fine serrations for a clean, non-slip cut.
  • Adapted to the hand; angled blades and optimized handle design for easier use.
KNIPEX # Inch Head Style Handles
95 05 20 US 6 1/4 polished 45° angled, spring, 2 crimpers multi-component, fiberglass reinforced plastic
95 05 10 SBA 6 1/4 polished straight, crimper multi-component, fiberglass reinforced plastic

Electrician's Folding Knife

  • Universal folding knife with a top quality stainless-steel German blade.
KNIPEX # Unfolded Length inch Blade Length inch Blade material Head Handles
16 20 50 SB 7 7/8 3 3/16 stainless steel - durable shock-resistant plastic

Wire Rope Cutters

Bowden Cable Cutter

  • For Bowden cables and soft wire.
  • Sickle shape cutting edges surround the material and prevent the wire rope from fanning out.

Wire Rope Shears

  • All shears include thumb lock and opening spring.
  • Cuts cleanly and evenly without wire ends splaying or fanning out.
  • 6 1/4" version is considerably more powerful due to the box joint design.
  • The 7 1/2" versions include two crimping dies for end caps on Bowden cable sheaths and ferrules for wire rope.
KNIPEX # Description Inch Cutting Capacity Ø inch Handles
95 61 150 SBA Bowden Cable Cutter 6 1/8 plastic dipped
95 62 160 SBA Wire Rope Shears 6 1/4 5/32 comfort grip
95 61 190 SBA Wire Rope Shears 7 1/2 13/64 plastic dipped
95 62 190 SBA Wire Rope Shears 7 1/2 13/64 comfort grip

1000V Insulated Screwdrivers

  • Handle design prevents rolling.
  • Chrome vanadium molybdenum steel.

For more information and warnings on 1000V Insulated Tools visit https://www.knipex-tools.com/insulated.

Component Description Tip Type Blade Width Blade Thickness Shaft Length Overall Length
98 20 25 3/32" slotted screwdriver, 3" 3/32 1/64 3 7
98 20 30 7/64" slotted screwdriver, 4" 7/64 1/64 4 8
98 20 35 1/8" slotted screwdriver, 4" 1/8 1/64 4 8
98 20 40 5/32" slotted screwdriver, 4" 5/32 1/32 4 8
98 20 55 7/32" slotted screwdriver, 5" 7/32 1/32 5 9 1/8
98 20 65 1/4" slotted screwdriver, 6" 1/4 3/64 6 10 3/8
98 20 80 5/16" slotted screwdriver, 7" 5/16 3/64 7 11 5/8
98 24 00 P0 screwdriver, 2 3/8" P0 - - 2 3/8 6 3/8
98 24 01 P1 screwdriver, 3 1/4" P1 - - 3 1/4 7 3/8
98 24 02 P2 screwdriver, 4" P2 - - 4 8 3/8
98 24 03 P3 screwdriver, 6" P3 - - 6 10 5/8
98 12 01 R1 square drive screwdriver, 3 1/8" R1 - - 3 1/8 7 3/8
98 12 02 R2 square drive screwdriver, 4" R2 - - 4 8 3/8

KNIPEXTEND TetheredTool Clips & ColorCoded Clips

Quickly add a tethered connection point to any of the 150+ KNIPEXTEND ready tools. The Tethered Tool clip easily connects your tool to the KNIPEX Tethered Tool System and protects against accidents caused by falling tools.

You value your time and your craft. Our ColorCoded Clips allow you to maximize both. Now you can identify the right tool at a glance and keep the process moving smoothly.

Plumbing Sets

6-Piece Plumbing Set with Free KNIPEX Keeper Pouch (9K 00 80 180 US)

Component Description Handles
90 20 185 7 1/4" Flexible Hose and PVC Cutter non-slip plastic
82 01 200 8" TwinGrip Pliers non-slip plastic
71 31 250 10" High Leverage XL Compact Bolt Cutter non-slip plastic
81 11 250 10" Pipe Gripping Pliers-Replaceable Plastic Jaws non-slip plastic
86 01 250 10" Pliers Wrench non-slip plastic
87 01 250 10" Cobra Water Pump Pliers non-slip plastic

3-Piece Black Pliers Wrench Set (00 20 06 US3)

Component Description Handles
86 01 180 7 1/4" Black Pliers Wrench non-slip plastic
86 01 250 10" Black Pliers Wrench non-slip plastic
86 01 300 12" Black Pliers Wrench non-slip plastic

3-Piece Pliers Wrench Set (00 20 06 US2)

Component Description Handles
86 03 180 7 1/4" Chrome Pliers Wrench plastic dipped
86 03 250 10" Chrome Pliers Wrench plastic dipped
86 03 300 12" Chrome Pliers Wrench plastic dipped

8-Piece Cobra® Water Pump Pliers Set (9K 00 80 149 US)

Component Description Handles
87 00 100 4" Cobra XS Water Pump Pliers texturized
87 01 125 5" Cobra Water Pump Pliers non-slip plastic
87 01 150 6" Cobra Water Pump Pliers non-slip plastic
87 01 180 7 1/4" Cobra Water Pump Pliers non-slip plastic
87 01 250 10" Cobra Water Pump Pliers non-slip plastic
87 01 300 12" Cobra Water Pump Pliers non-slip plastic
87 01 400 US 16" Cobra Water Pump Pliers plastic dipped
87 01 560 US 22" Cobra Water Pump Pliers plastic dipped

7-Piece Pliers Wrench Set (9K 00 80 167 US)

Component Description Handles
86 04 100 4" Chrome Pliers Wrench XS texturized
86 03 125 5" Chrome Pliers Wrench plastic dipped
86 03 150 6" Chrome Pliers Wrench plastic dipped
86 03 180 7 1/4" Chrome Pliers Wrench plastic dipped
86 03 250 10" Chrome Pliers Wrench plastic dipped
86 03 300 12" Chrome Pliers Wrench plastic dipped
86 03 400 US 16" Chrome Pliers Wrench plastic dipped

3-Piece Alligator® Pliers Set (00 20 07 US1)

Component Description Handles
88 01 180 7 1/4" Alligator Water Pump Pliers non-slip plastic
88 01 250 10" Alligator Water Pump Pliers non-slip plastic
88 01 300 12" Alligator Water Pump Pliers non-slip plastic

3-Piece Universal Set w/ Cobra® Water Pump Pliers Set (00 20 08 US2)

Component Description Handles
26 11 200 8" Long Nose Pliers with Cutter plastic dipped
74 21 200 8" High Leverage 12° Angled Diagonal Cutters plastic dipped
87 01 250 10" Cobra Water Pump Pliers non-slip plastic

3-Piece Universal Set w/ Alligator® Pliers Set (00 20 08 US1)

Component Description Handles
26 11 200 8" Long Nose Pliers with Cutter plastic dipped
74 21 200 8" High Leverage 12° Angled Diagonal Cutters plastic dipped
88 01 250 10" Alligator Water Pump Pliers non-slip plastic

3-Piece Pro Pliers Set (9K 00 80 157 US)

Component Description Handles
09 01 240 9 1/2" High Leverage Lineman's Pliers plastic dipped
74 01 200 8" High Leverage Diagonal Cutters plastic dipped
87 01 250 10" Cobra Water Pump Pliers non-slip plastic

3-Piece Cobra® Water Pump Pliers Set with Keeper Bag (9K 00 80 122 US)

Component Description Handles
87 01 125 5" Cobra Water Pump Pliers non-slip plastic
87 01 250 10" Cobra Water Pump Pliers non-slip plastic
87 01 300 12" Cobra Water Pump Pliers non-slip plastic
9K 00 90 12 US Keeper Zipper Bag, Empty -

2-Piece 10" Cobra® Water Pump and Pliers Wrench Set (9K 00 80 147 US)

Component Description Handles
86 03 250 10" Chrome Pliers Wrench plastic dipped
87 01 250 10" Cobra Water Pump Pliers non-slip plastic

2-Piece Mini Pliers Set in Belt Pouch (00 20 72 V04 XS)

Component Description Handles
86 04 100 4" Pliers Wrench XS texturized
87 00 100 4" Cobra XS Water Pump Pliers texturized

5-Piece Core Pliers Set in Tool Roll (9K 00 80 150 US)

Component Description Handles
13 71 8 8" Forged Wire Stripper 20-10 AWG plastic dipped
74 01 250 10" High Leverage Diagonal Cutters plastic dipped
82 01 200 8" TwinGrip Pliers non-slip plastic
86 01 250 10" Black Pliers Wrench non-slip plastic
87 01 250 10" Cobra Water Pump Pliers non-slip plastic

3-Piece Top Selling Pliers Set (9K 00 80 156 US)

Component Description Handles
82 01 200 8" TwinGrip Pliers non-slip plastic
86 01 180 7 1/4" Black Pliers Wrench non-slip plastic
87 01 180 7 1/4" Cobra Water Pump Pliers non-slip plastic

3-Piece 10" Pliers Set (9K 00 80 117 US)

Component Description Handles
74 01 250 10" High Leverage Diagonal Cutters plastic dipped
86 03 250 10" Chrome Pliers Wrench plastic dipped
87 01 250 10" Cobra Water Pump Pliers non-slip plastic

4-Piece Special Pliers Set (9K 00 80 94 US)

Component Description Handles
03 01 200 8" Combination Pliers plastic dipped
26 11 200 S1 8" Long Nose Pliers with Cutter and 12 AWG Stripper plastic dipped
74 01 250 10" High Leverage Diagonal Cutters plastic dipped
87 01 250 10" Cobra Water Pump Pliers non-slip plastic

Meet KNIPEX

KNIPEX concentrates its efforts on being the best pliers manufacturer in terms of quality, innovation and efficiency and its pliers satisfy the highest expectations in terms of performance, ergonomics and service life.

  • One of the largest manufacturers of professional quality pliers worldwide.
  • Over 140 years of experience.
  • Company is family-owned by the fourth generation.
  • All manufacturing processes, including forging, design and packaging, take place in our German facility.
  • Strive for continuous innovation for new and existing products, setting new benchmarks in the industry to make the best pliers.
  • Best in class – high-quality steel, self-developed processes and machinery, quality testing and skilled personnel.

KNIPEX Tools LP

1500 Busch Parkway
Buffalo Grove, IL 60089
Tel: 847.398.8520
Fax: 847.398.8526
customer-service@knipex-tools.com
©2025 KNIPEX Tools LP

Visit us online: knipex-tools.com | knipex.us | knipextools | knipex_northamerica | knipex-tools-lp

PDF preview unavailable. Download the PDF instead.

KNIPEX HVAC Plumbing Brochure 7 2025 Adobe PDF Library 17.0 Adobe InDesign 20.4 (Macintosh)

Related Documents

Preview KNIPEX Cobra® ES Gripping Pliers | Slim Jaws for Confined Spaces
Discover the KNIPEX Cobra® ES, featuring slim jaws for confined spaces, enhanced gripping capacity, and push-button adjustment. Available in 7 1/4" and 10" sizes. Learn more about these versatile pliers.
Preview KNIPEX Cobra Pliers Instruction Manual
Instruction manual for KNIPEX Cobra Pliers (86 07 250), detailing usage and safety precautions.
Preview KNIPEX 00 31 31 V01 SB Photovoltaic Installation Set
Detailed information on the KNIPEX 00 31 31 V01 SB Photovoltaic Installation Set, including its components, specifications, and compliance.
Preview KNIPEX Installation Pliers - Product Specifications
Comprehensive details on KNIPEX Installation Pliers, including models 13 81 8, 13 82 8, 13 82 8 T BKA, and 13 88 8 US. Features, functions, material specifications, and cutting/stripping/crimping capacities are provided.
Preview KNIPEX 00 11 06 V04 JointKey Quadro Universalschlüssel - Technische Daten und Anwendung
Detaillierte Informationen zum KNIPEX 00 11 06 V04 JointKey Quadro Universalschlüssel. Enthält Spezifikationen, Anwendungsbereiche in Gebäudetechnik, Gas- und Wasserversorgung sowie technische Attribute.
Preview KNIPEX 95 39 320 02 Cable Cutter Repair Set
Product data sheet for the KNIPEX 95 39 320 02 repair set for cable cutting tools 95 32 320 and 95 36 320, featuring precise cutting action.
Preview KNIPEX 97 90 16 Crimp-Sortiment: Abisolierzange, Crimpzange und Aderendhülsen
Detaillierte Informationen zum KNIPEX 97 90 16 Crimp-Sortiment, einschließlich einer Crimpzange, Abisolierzange und verschiedenen Aderendhülsen, untergebracht in einem TANOS MINI-systainer®. Spezifikationen, Funktionen und Compliance-Informationen.
Preview KNIPEX 90 61 16 Notching Pliers - Technical Specifications and Features
Detailed information on the KNIPEX 90 61 16 Notching Pliers, including key features, technical specifications, and compliance details. Ideal for precise notching in electric and plumbing installations.