User Manual for NICRON models including: K11, 2BCX8-K11, 2BCX8K11, K11 Outdoor Camping Lamp, K11, Outdoor Camping Lamp, Camping Lamp, Lamp
Dongguan Lichen Plastic Hardware Co., Ltd. K11 2BCX8-K11 2BCX8K11 k11
1. 3/ *Power on *Power off *Connect *Disconnect * 2. // //SOS *SOS 3. 0.5/ 4. : : K11 : ABS+PC+ : 30-720LM : 5W : 3000mAh : 5.3 : 4 5W : 1800-7000K : Type-C : 5V 2A : 77*77*190mm : 82*82*199mm : Q/LCSJ003 : USB USB *-1045 * *, *USB x1x1x1x1 FCC FCC15 (1) (2) 1FCC15B - - - - / 2 QC-010 Outdoor Camping Lamp user manual Please read this manual carefully before using the product to ensure that the product is used correctly Instructions 1. Bluetooth Speaker Function Turning On/Off: Press and hold the power button for 3 seconds to turn the Bluetooth speaker on or off. Volume Control: Press the minus button briefly to decrease the volume, and the plus button briefly to increase the volume. Track Control: Press and hold the minus button to switch to the previous track, and press the plus button briefly to switch to the next track. Voice Prompt "Power on": Indicates the Bluetooth speaker is turned on. Voice Prompt "Power off": Indicates the Bluetooth speaker is turned off. Voice Prompt "Connect": Indicates the Bluetooth device is connected. Voice Prompt "Disconnect": Indicates the Bluetooth device is disconnected. When both the speaker and light functions are on, the minus and plus buttons are used only for adjusting the light brightness. Volume control and track switching should be done on your Bluetooth device. 2. Light Function Turning On/Off: Press the light button briefly to turn the light on or off. The light has four modes: warm light, white light, warm white light, and SOS signal light. Brightness Control: Press the minus button briefly to decrease the brightness gradually, and the plus button briefly to increase the brightness gradually. The brightness of the SOS signal light cannot be adjusted. 3. Flashlight Function Turning On/Off: Press and hold the flashlight button for 0.5 seconds to turn the flashlight on or off. 4. Indicator Light Status Charging: The indicator light flashes red while charging. Fully Charged: The indicator light remains solid red when fully charged. Charging Other Devices: The indicator light remains solid blue when charging other devices. Product Specifications Product Name: Outdoor Camping Lamp Color Temperature: 1800-7000K Material: ABS + PC + Electronic Components Product Dimensions: 77 x 77 x 190 mm Color Box Dimensions: 82*82*199 mm Standards Complied: Q/LCSJ003 Speaker: 4 5W Place of Origin: Dongguan, China Product Model: K11 Charging Port: Type-C Rated Input: 5V-2A Lumen Output: 30-720 lm Rated Power: 5W Battery Capacity: 3000mAh Bluetooth Version: 5.3 Schematic diagram of product Silicone portable belt speaker switch USB output flashlight Precautions USB * The optimal operating and storage environment temperature of the product is-10 to 45. Do not use it in extremely cold and hot environments. * Direct lighting into the eyes is prohibited. Children must use the product correctly under adult supervision and guidance. * Please do not disassemble or repair this product without permission to avoid accidents or possible product damage. * Please use a high-quality power outlet and standard USB charging cable to charge this product Packaging content Outdoor camping light x1 Hand strap x1 USB charging cable x1 User Manual x1 certificate surveyor QC-010 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Adobe Illustrator CC 23.0 (Windows) Adobe PDF library 15.00