NuWave OxyPure HEPA 300 Air Purifier

Welcome to the NuWave® Family!

Congratulations on purchasing the NuWave OxyPure HEPA 300 Air Purifier. This manual provides detailed operating and care instructions to help you get the most out of your OxyPure experience.

For any questions, comments, or concerns, please contact NuWave Customer Service:

• Phone: 1-877-689-2838 (Mon-Fri 7:30am-4:30pm CST)
• Email: help@nuwavenow.com

Connect with NuWave:

• Facebook: [f]
• Instagram: [Instagram logo]
• Twitter: [Twitter logo]
• Hashtag: #nuwavenow

Visit nuwavenow.com to explore other products and accessories.

Important Safeguards

Always keep this manual handy for future reference. Read all instructions and warnings before use.

• Use the OxyPure only for its intended purpose.
• Do not immerse the cord, plug, or any part of the OxyPure in water or other liquids to prevent electrical shock.
• Close supervision is necessary when the OxyPure is used by or near children.
• Do not operate the OxyPure with a damaged cord or plug, or if the unit has been dropped or damaged.
• Discard the protective plastic covering the power plug before use.
• Do not run the cord under carpeting or cover it with rugs or runners.
• Arrange the cord away from high-traffic areas to prevent tripping.
• Do not plug the OxyPure into an outlet or power strip used by other appliances.
• Always set up the OxyPure on a flat, stable surface, at least 2-3 feet away from walls.
• Do not install the OxyPure near heating devices, flammable gases, or in moist areas.
• Do not operate the OxyPure on its side or place objects on top of it.
• Do not sit or stand on, or lean against, the OxyPure.
• Alteration or modification of the OxyPure or use of unauthorized attachments may cause fire, injury, or damage.
• Electrical parts are live even when the OxyPure is off. Unplug the unit when assembling.
• Do not use the OxyPure in industrial settings where machine oil may be present.
• Turn the power OFF before unplugging.
• Unplug the OxyPure when not in use, unattended, or before performing maintenance.
• Do not operate if abnormal sounds or motion are detected.
• If a foreign object contacts the fan, turn off and unplug the unit.
• Inspect for loose or missing parts before and after each use.
• Do not pull, lift, drag, or carry the OxyPure by its cord.
• Do not block air inlet or outlet vents.
• Do not operate the OxyPure without the filter.

Filter Changing Precautions

• Do not attempt to clean the HEPA/Carbon filter.
• Wear a mask and rubber gloves when handling a dirty filter.
• Change filters in a well-ventilated area.
• Always use a NuWave filter for your model.

Parts & Accessories

The OxyPure HEPA 300 Air Purifier includes:

• Motor (Part #: H0P4)
• Filter Access Lid (Part #: H0P2)
• Non-Skid Feet (Part #: H0P5)
• OxyPure HEPA 300 Air Purifier (Model #: 47501)
• Filter Holder (Part #: H0P1)
• HEPA/Carbon Filter (Part #: H0A1)
• Power Supply (Part #: H0P3)

To order replacement parts, call NuWave Customer Service at 877-689-2838 or order online at nuwavenow.com.

Important: Always remove the plastic wrapping from the new filter BEFORE use to prevent damage to the motor and potential voiding of the warranty.

Filter replacement steps are illustrated with four diagrams showing filter removal and insertion.

Assembly

Before initial use, ensure the filter is properly installed.

With the OxyPure unplugged:

1. Turn the Filter Access Lid at the bottom to open it.
2. Remove the new HEPA/Carbon Filter.
3. Remove the plastic wrapping from the new filter.
4. Insert the new HEPA/Carbon Filter into the Filter Holder.
5. Securely close the Filter Access Lid.
6. Attach the Power-Supply cord and plug in the OxyPure.

*When using the OxyPure for the first time.

Operating the OxyPure

The OxyPure HEPA 300 Air Purifier features a simple, one-button operation.

1. Plug the Power Supply cord into the unit and then into a suitable electrical outlet. The unit will beep once.
2. Press the Power icon. The unit will activate at the lowest fan speed, beep once, and the upper-right LED will light.
3. Press the Power icon again for medium fan speed. The unit will beep, and the second LED will light.
4. Press the Power icon again for high fan speed. The unit will beep, and the third LED will light.
5. Press the Power icon a fourth time to turn off the unit. The unit will beep, and the LEDs will go dark.

Fan Speed Levels:

EnergySTAR Certification

The OxyPure meets EPA specifications for energy efficiency, achieving a Clean Air Delivery Rate (CADR) of 84 ft³/min for smoke, with a standby power of 0.55W. It also exceeds the minimum performance requirement of 2.0 CADR/Watt.

Electrical Safety

The OxyPure has been tested and found to be fully compliant with the ANSI/UL507 electrical safety standard, as required by the California Air Resources Board (CARB).

Maintaining the OxyPure

Changing the HEPA/Carbon Filter

Replace the HEPA/Carbon Filter regularly. The 'Replace Filter' light (Fan Speed 1 light) will glow yellow after 6 months and red after 12 months, indicating replacement is necessary.

• Turn the OxyPure off and unplug it.
• Take the unit outside or to a well-ventilated area.
• Wear a mask and rubber gloves. Open the Filter Access Lid and remove the old filter, placing it in a plastic bag for disposal.
• Unwrap the new HEPA/Carbon Filter and insert it into the Filter Holder.
• Securely close the Filter Access Lid.
• Plug in and turn on the unit.
• To reset the 'Replace Filter' light, press and hold the Power button for 2 short beeps. The Fan Speed 1 light will turn white.

Cleaning the OxyPure

• Remove the dirty filter and place it in a garbage bag.
• Wash the exterior vents with warm, soapy water and dry thoroughly. Use a gentle, non-abrasive cleaner applied to a cloth, not directly to the unit.
• Ensure vents are free of obstructions.
• Clean the motor housing with a vacuum cleaner brush attachment or a damp cloth, and dry thoroughly. Do not immerse the motor housing in water.
• Reassemble the OxyPure.

Troubleshooting Guide

The OxyPure Does Not Turn On:

1. Ensure the unit is plugged into a working outlet.
2. Press the POWER button on the control panel.

The Fan Speed Doesn't Change:

This may indicate an issue with the control panel button. Contact Customer Service for assistance.

Airflow From the Top Vent is Weak:

The HEPA/Carbon filter may be dirty. Change the filter.

The Unit Produces Smoke or Odor:

The HEPA/Carbon filter may be dirty. Change the filter.

If problems persist, contact NuWave Customer Service at 1-877-689-2838 or help@nuwavenow.com.

OxyPure Efficiency

Allergies and Sleep

The OxyPure helps alleviate allergy symptoms by removing airborne allergens such as pollen, dust, dust mites, mold spores, and other particles that can affect respiratory health and sleep quality.

Clean Air Delivery Rate and Removal Efficiency

The Clean Air Delivery Rate (CADR) measures an air purifier's effectiveness in removing pollutants. The OxyPure demonstrates strong performance across various particle types:

The OxyPure is beneficial for improving indoor air quality, especially during seasons prone to colds and flu.

Pollutant Removal

Volatile Organic Compounds (VOCs)

Formaldehyde, a common VOC, is present in many household products. The OxyPure's carbon filter effectively absorbs VOCs, contributing to healthier indoor air.

Airborne Virus Elimination Rate

The OxyPure effectively removes airborne pathogens, including Influenza A H3N2. Test results show high removal rates:

Airborne Bacteria and Mold Elimination Rates

The OxyPure also removes airborne bacteria and mold spores. Tested bacteria include Staphylococcus epidermidis, Staphylococcus aureus, Staphylococcus albus, Escherichia coli, and Aspergillus niger, with removal rates exceeding 99.98%.

Pollutants in the Air:

Gases, VOCs, and Fumes:

• ODORS: Household Fumes, Smoke, and Cooking Odors
• VOCs: Formaldehyde and Benzene from Carpets, Flooring, Furniture, Glues, and Cleansers.
• FUMES: Nitrogen Dioxide from Gas Stoves and Car Exhausts
• OZONE: Pollutants Emitted by Power Plants, Oil Refineries, and Chemical Plants

For detailed test reports, visit nuwaveoxypure.com/tests.

For questions about your OxyPure, contact NuWave Customer Service at 877-689-2838 or help@nuwavenow.com.

Limited Warranty

Manufacturer Warranty

The NuWave OxyPure HEPA 300 Air Purifier is warranted against manufacturer defects for 1 year from the date of purchase under normal household use and operation according to the manufacturer's instructions. This warranty applies to the original purchaser only.

Warranty Exclusions

The warranty is void if repairs are made by unauthorized dealers, or if the serial number plate is removed or defaced. It does not cover normal wear and tear, damage from accidents, acts of God, power fluctuations, alterations, abuse, misuse, improper installation, or commercial/rental use. NuWave LLC reserves the right to void the warranty for products purchased from unauthorized dealers.

Obtaining Service

To obtain service, owners must pay for non-warranty services and parts. Package the product securely, including your name, address, phone number, a detailed description of the problem, and a Return Goods Authorization (RGA) number. Call 1-877-689-2838 or email help@nuwavenow.com to obtain an RGA number. Provide the product model and serial number, and proof of purchase.

Manufacturer's Obligation

The manufacturer's obligation is limited to repairing or replacing defective parts under normal use. This warranty is valid only within the continental United States for the original purchaser. The warranty cannot be altered or extended except by a written instrument from the manufacturer. Remedies are limited to repair or replacement. The manufacturer is not liable for consequential or incidental damages.

Dispute Resolution

For disputes related to the product or website, contact NuWave LLC first. If unresolved, disputes will be settled by binding arbitration according to AAA Commercial Arbitration Rules. Arbitration will be conducted conveniently for the consumer. By agreeing to arbitration, you waive the right to sue in court, a court hearing, judge trial, or jury trial, and agree not to participate in class action lawsuits or arbitration.

Opt-Out Procedure

To opt out of arbitration, contact NuWave LLC within 30 days of product delivery. Failure to opt out within this period means you waive your right to sue or participate in class actions.

State of California Proposition 65 Warning

This product may expose you to chemicals, including lead and Bisphenol A (BPA), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

For any remaining questions about operation or warranty, please contact NuWave LLC at 1-877-689-2838 or help@nuwavenow.com.