User Manual for linshang models including: LS160A Transmission Meter, LS160A, Transmission Meter, Meter
File Info : application/pdf, 4 Pages, 207.90KB
DocumentDocumentShenzhen Linshang Technology Co., Ltd. Transmission Meter Model: LS160A User Manual V6.06 Please read this manual carefully before using and reserve it for reference. 8/7/2024 Page 1 of 4 I. Product introduction Shenzhen Linshang Technology Co., Ltd. Transmission Meter is a small size, portable product for transmission value measurement. It is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. Standards for the product GB/T 31849-2015 Film mounted motor vehicle glass GA/T 744-2013 Automotive solar control window films JJF 1225-2009 Calibration Specification for Transmittance Meter of Automobile JJG 178-2007 Ultraviolet,Visible,Near-Infrared Spectrophotometers II. Parameters Dimension Weight Thickness of testing sample Resolution Accuracy VL Peak wavelength UV Peak wavelength IR Peak wavelength Power Supply Supply Voltage Operating Current Operating Power Consumption 93mm×52mm×25mm (L×W×H) 65g (exclude batteries) <0.8mm 0.1% ±2% 530nm 365nm 1400nm 4×AAA alkaline battery DC5V 10mA 50mW III. Operation 1. Power on When the meter is off, press the "ON/Hold" button to power on. 2. Power off 8/7/2024 Page 2 of 4 Shenzhen Linshang Technology Co., Ltd. Press "ON/Hold" button and hold for longer than 3 seconds, the meter will be powered off. 3. Auto off No button is pressed in 3 minutes, and then the meter will power off automatically. 4. Manual hold If "ON/Hold" button is short pressed during measure status, the transmission value will hold on the LCD, "HOLD" symbol is displayed on the LCD. Press the "ON/Hold" button again will release the "Hold" mode. When backlight is off, press the "ON/Hold" button turn on the backlight. 5. Measurement When UVR (Ultraviolet Rejection) and IRR (Infrared Rejection) display 0% and VLT (Visible light transmission) display 100%, insert the testing sample in the "OPENING", VLT, UVR and IRR value will display simultaneously. IV. Features 1. UV rejection meter, IR rejection meter, light transmittance meter. Three functions in ONE device. 2. Small size, portable product for transmission value measurement. 3. Simple operation, putting the testing sample in the "OPENING", VLT, UVR and IRR values of the sample will simultaneously display. 4. For window film, solar film and other transparence material testing. V. Notes 1. When battery symbol is empty and flash, please replace the battery. 2. Keep the "OPENING" is empty before turning on the meter. Other wise the meter will display "Error" interface or testing interface, empty the "OPENING", turn off and turn on again. 3. ±2% Accuracy is for Colorless and transparent material, for colorful or optical coating product etc, it will be low accuracy. VI. Standard packing list No. Description 1 Transmission Meter 2 User Manual Quantity Unit 1 pcs 1 pcs 8/7/2024 Page 3 of 4 VII. Service Shenzhen Linshang Technology Co., Ltd. 1 The meter has one-year warranty. If the meter works abnormally, please send the whole meter to the company for maintenance. 2 Provide users with spare parts and lifelong maintenance services. 3 Provide the users with the meter inspection service for free. 4 Free technical support for long term. Manufacturer: Shenzhen Linshang Technology Co., Ltd. Website: www.linshangtech.com Service hotline: 086-755-86263411 Email: sales21@linshangtech.com 8/7/2024 Page 4 of 4