TP-Link Tapo C222 Pan/Tilt AI Home Security Wi-Fi Camera

Appearance

The camera features several key components accessible from its exterior:

• RESET Button: Located by tilting the camera lens upwards. Press and hold for 5 seconds to reset Wi-Fi settings, or for 10 seconds for a full factory reset.
• microSD Card Slot: Also found by tilting the lens upwards. Insert a microSD card here for local recording, initializing it via the Tapo app.
• LAN Port: Allows connection to your router using an Ethernet cable.

Front View: The front of the camera displays the lens and a speaker.

Back View: The back of the camera houses the microSD card slot, RESET button, speaker, LAN port, and Power port.

For comprehensive technical support, user guides, and warranty information, please visit www.tapo.com/support/.

Safety Information

Please adhere to the following safety guidelines:

• Keep the device away from water, fire, humidity, or hot environments.
• Do not use a damaged charger or USB cable.
• Use only recommended chargers.
• Do not use the device where wireless devices are prohibited.
• The adapter should be installed near the equipment and be easily accessible.
• Use only power supplies provided by the manufacturer in the original packaging.
• For indoor use only.
• Do not disassemble, repair, or modify the product.
• Do not use the product if the casing is broken (risk of electric shock).
• Never touch the product with wet hands.
• Do not expose to heavy rain or moisture.
• Avoid placing near automatically controlled devices like fire alarms, as radio waves may cause malfunction.
• Observe restrictions on using wireless products in fuel depots, chemical plants, or blasting areas.
• Clean the product only with a dry cloth; do not use liquids.
• Never insert metal objects into the product. If a metal object enters, turn off the circuit breaker and contact an electrician.
• This product is not intended for medical care. Consult medical device manufacturers (e.g., pacemakers) regarding RF shielding.
• Do not use in healthcare facilities where equipment may be sensitive to RF energy.
• Do not use near water (e.g., bathtubs, sinks, wet basements, swimming pools).
• Keep the product free from excessive smoke, dust, high temperatures, and vibration.
• Do not expose to direct sunlight.
• Do not place heavy objects on the product.
• Unplug the product when leaving it unused for extended periods.
• This product may interfere with other electronic devices (TVs, radios, computers, phones).
• Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F).

Please read and follow this safety information. TP-Link is not liable for accidents or damage due to improper use. Operate at your own risk.

Declarations of Conformity

TP-Link declares compliance with essential requirements of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU) 2015/863. The EU declaration of conformity is available at https://www.tapo.com/support/ce/.

TP-Link declares compliance with essential requirements of the Radio Equipment Regulations 2017. The UK declaration of conformity is available at https://www.tapo.com/support/ukca/.

©2024 TP-Link

Mounting Instructions

1. Mark Position

Place the mounting template where you want the camera. For wall mounting, drill two holes through the indicated circles (∅ 6 mm / 15/64 in.).

[Diagram: Shows a circular template with two hole markings and a diameter measurement.]

2. Mount Base

Affix the camera base using the screws. For wall mounting, insert two anchors into the holes first, then use the screws to secure the camera base over the anchors.

[Diagram: Shows the camera base being attached to a wall with screws and anchors.]

3. Secure Camera

Attach the camera onto the base and rotate it to secure.

Note: If the Pan and Tilt range requires adjustment after mounting, refer to Pan & Tilt Correction at https://www.tp-link.com/support/faq/4023/.

LED Indication

Mounting Kit Components

The mounting kit includes:

• Camera Base
• Camera
• Mounting Template
• Screws
• Anchors (for wall mounting)

Setup Guide

STEP 1: DOWNLOAD APP

Get the Tapo app from the App Store or Google Play.

[QR code for downloading the Tapo app]

Download on the App Store | GET IT ON Google Play

STEP 2: POWER UP

Plug the adapter into the camera to power it up.

[Diagram: Shows the camera being connected to a power adapter.]

STEP 3: SET UP

Tap the [Settings/Gear] button in the app and select your model. Follow the app instructions to complete the setup.

Setup Video

Scan the QR code or visit https://www.tp-link.com/support/setup-video/#cloud-cameras for setup videos.

[QR code for setup videos]