Amazon Sign-In
Installation Guide for ebay models including: C1202 Torsion Bar Key Leveling Kit, C1202, Torsion Bar Key Leveling Kit, Bar Key Leveling Kit, Key Leveling Kit, Leveling Kit, Kit
KSP Torsion bar key, Forged Torsion Bar Keys Lift Kit adjustable 1"-3" Front truck SUV Suspension Level for Silverado sierra 1500 classic 99-07 4WD 6 Lug : Automotive
File Info : application/pdf, 2 Pages, 323.11KB
DocumentDocumentKit No. 72302 Torsion Bar Key Leveling Kit Installation (if you want to buy shock bracket, please contact us) Vehicle application Cadillac: Escalade 2002-2006 2WD 4WD GMC: Yukon 1500 2000-2006 2WD 4WD Yukon XL 1500 2000-2006 2WD 4WD Sierra 1500 Classic 1999-2007 4WD 6-lug wheel only Yukon 1500 1992-1999 4WD only Chevy: Silverado 1500 Classic 1999-2007 4WD 6-lug wheel Suburban 1500 1992-1999 4WD only Suburban 1500 2000-2006 4WD 2WD Suburban 2500 1992-1999 4WD only Tahoe 1995-1999 4WD only Tahoe 1500 2000-2006 2WD 4WD K1500 1988-1998 4WD only K2500 1988-1999 4WD only K3500 1988-1999 4WD only 1. To begin the installation, block the vehicle's rear tires. Place a jack stand on both the driver and passenger side. 2. Remove the front tire and wheel assembly. 3. Remove the lower shock bracket and remove the shock from the factory. Remove the factory lower shock bracket and discard. 4. Install the Extender shock bracket to the lower control arm with the angle on the bracket going toward the center of the vehicle. (If you don't have an extender shock bracket, you need to buy it.) 5. Install the lower shock and shock hardware to the new mount and torque to spec. 6. Repeat the lower shock bracket installation to the other side of the vehicle. 7. Locate the torsion bar cross member. There is a bolt on each side of the cross member that adjusts torsion bar preload. Measure or mark the exposed length of the adjuster bolt for reference during re-assembly. 8. Working on the driver side, Remove the adjuster bolts from the torsion key. Using the torsion key unload tool, carefully unload the torsion key and remove the keeper. Note the orientation of the torsion bar key in relation to the end of the torsion bar 9. Install the new torsion key, and reinstall the bar pin and torsion bolt. Using the same precautions and procedures that were used during the removal the alignment to factory specifications. 11. You have a professional alignment check and adjust 12. After 25 miles of driving, re-torque the lug nuts, and after 500 miles of driving, re-torque all of the hardware associated with the leveling spacer installation to factory specifications. Repeat the torquing procedure as required. 13: Make sure you disconnect your shocks before torquing the new torsion keys to desired height-( I suggest removing the shock brackets before you do the torsion keys due to binding issues. ) The Vehicle Needs To Have A Front End Alignment Performed Immediately after Installation 10. Torque all bolts in the installation torsion key to factory specs. Thank you for the purchases! It is our honor to help you. So please write us about what you think and what you need. We will reply you ASAP and try our overwhelming best to help you solve the problem. Please feel free to contact us via eBay message or Amazon tools. E-mailspeed@nbgoldenlion.com Amazon: 1.Visit www.amazon.com/your-orders 2. Find your product 3. Click on "contact seller" 4. Include your order # eBay: 1.Visit www.ebay.com 2. Click on "My eBay" 3.Find your product 4. Click on "More actions" 5. Click on "Contact seller"