Installation Instruction

Safety Information

It is important to thoroughly read and understand this entire manual before assembling, operating, or installing the product.

Warning

• Turn off electricity before installation, changing bulbs, or cleaning the light fixture.
• This fixture requires 14 pieces of G9 bulbs. The maximum wattage for each bulb is 40W. Please do not exceed the recommended wattage.
• A qualified electrician is recommended for installation.
• Do not use corrosive substances such as gasoline or alcohol disinfectants to wipe the lamps, as this will damage the lamps.

Preparation

• Before installation, please make sure all accessories are included (refer to the package content). If any part is missing, please contact us at the order page; we will arrange the replacement in a timely manner.
• 14 pieces of G9 bulbs (Max. 40W each) are required.
• For any questions or inquiries, please feel free to contact us at the order page. Our customer service team will reply ASAP.

Package Contents

Please check the parts list. If any parts are missing during your actual installation, please contact us; we will help you in time!

The following parts are included:

• A: 4 pieces (likely mounting hardware)
• B: 3 pieces (likely mounting hardware)
• C: 110 pieces (likely decorative crystals or fasteners)
• D: 60 pieces (likely decorative crystals or fasteners)
• E: 50 pieces (likely decorative crystals or fasteners)
• F: 1 piece (the main lamp body/frame)

Diagram Description: A line drawing depicts the main oval-shaped chandelier frame (F) with multiple attachment points for decorative elements. Smaller diagrams show individual components labeled A, B, C, D, and E, indicating quantities.

This manual only shows the installation steps for one size. The installation methods for other sizes of products are similar. Be patient and fully utilize your artistic talent. What awaits you after completion is incredible beauty!

Installation Instructions

Diagram Description: A line drawing shows the overall structure of the chandelier, which is oval-shaped and has multiple tiers. It is suspended by cables from a central canopy that attaches to the ceiling.

Step 1

Diagram Description: This step illustrates the assembled chandelier hanging, showing the suspension cables.

1. Adjust the length of the hanging cable and wire according to your requirement.
2. Take off the mounting bracket from the ceiling canopy and install it on the ceiling.
3. Connect the lamp wires and your house wires together.
4. Install the lamp frame on the ceiling.

Step 2

Diagram Description: A detailed illustration shows the mounting bracket being secured to the ceiling junction box using screws.

Step 3

Diagram Description: This diagram shows the process of connecting the electrical wires from the chandelier to the house wiring, and then attaching the main lamp frame to the ceiling-mounted bracket.

Step 4

Diagram Description: A diagram illustrates how to adjust the height of the chandelier. It shows a hand pressing a small pin into the canopy mechanism, allowing the suspension cable length to be modified.

Press the small pin into the canopy to adjust height.

Maintenance

To ensure safe and efficient use of this product, please clean the lamp regularly (once a month). Before cleaning, turn off the power and wait for the lamp to cool to room temperature. Then, use a soft cloth dipped in water and wrung dry to wipe it clean.

Warranty

Our dedicated customer service team is available 24 hours a day to assist you. If you have any questions or concerns, we guarantee a response within 24 hours. During the warranty period, if you encounter any problems or need assistance, please don't hesitate to reach out to us via email. To ensure a swift and accurate resolution, kindly provide your order ID and detailed information regarding the issue.

Important Note: Please use this light fixture only for its intended purpose and avoid retrofitting or remodeling it. The warranty does not cover failures caused by third-party products or natural disasters.