得胜官网-广东得胜得胜官网-广东得胜
User Manual for TAKSTAR models including: E8W, 400, 6828, 333, E8W Wireless Amplifier, E8W, Wireless Amplifier, Amplifier
File Info : application/pdf, 24 Pages, 2.30MB
DocumentDocumentE8W Wireless Amplifier
E8W
E8W
400 6828 333
· · 18W · UHF40 · 40 · · / · UTF · 12 ·
·
1
E8W
· ....................................................................1 · ................................................................... 1 · .........................................................1 · .................................................................1 · ......................................................................................1 · ..................................................................................1 · ..................................................................................1
· 80Hz-12kHz · 18W · 4 · UHF630MHz-698MHz) · UHF40 · TFU 64G · MP3WAV
· · 3.7V/4000mAh · USB 5V/1000mA · 4 · 12 · 125×105×55mm · 340g
·
·
·
· 3.7V/400mAh
· 60Hz-16kHz
· USB 5V/200mA
· -51-54dB (0db=1V/Pa/m at 1kHz) · 2.5
· UHF630MHz-698MHz
· 5
· UHF40
· 38g
2
E8W
· · · 60Hz-16kHz · -51-54dB (0db=1V/Pa/m at 1kHz) · UHF630MHz-698MHz · UHF40
· · 3.7V/1800mAh · USB 5V/1000mA · 2.5 · 15 · 150g
3
E8W
/ LED USBTF" " 15 "-- -- -- --" "+" "-" "M" AUXTFTF "REC"" ""0000" /: / ; TFTF"" ""TF TFMP3WAV TFFAT16FAT32 exFATNTFS UU MIC IN
4
E8W
AUX IN3.5mmMP3 Type-C5V/1A3C 3.7V/4000mAh
12
5
1
5
Type-C
5
E8W
"ON""OFF" Type-CUSB "M""" "+" "-" LED /"01-40"40 "+""-""U1-U9"93 10 "M""-" "E0""M""+" "E1"1040
6
E8W
5 2. "" 2
1. "M'"3 10 2. "M" "+""-" "M"3"M"
7
E8W
"M""BLUE" "" "TAKSTAR E8W""TAKSTAR E8W"" "IPAD "M" ""
1. 2. 3. CCC 4. 5. 6. 7.
8
E8W
WEEE(2012/19/EU) WEEE
https://www.takstar.com
9
E8W Wireless Amplifier
Preface
Dear Customer, Thank you for purchasing Takstar E8W Wireless Amplifier. In order to better understand and use the product, please read this manual carefully. If you have any questions or suggestions, please contact our local dealer.
Features · High-power portable wireless amplifier, suitable for teaching, tour guide, training and sales. · Rare-earth speaker with 18W high power, excellent audio quality and loud output. · UHF wireless technology, about 40m use range in area without obstruction and interference. · Adjustable frequencies, 40 selected channels available, supporting multiple amplifiers used simultaneously. · With wireless handheld or headset mic that utilizes automatic frequency sync and resists interference. · High/Low power setting switchable on wireless headset mic, flexible in different environments. · Supports wireless playback, USB playback and TF card playback of multimedia files. · Built-in large-capacity lithium-ion battery lasts around 12hrs operation. · Special structure design makes it dust-proof, thus more durable and stable to use.
Application
· Teaching, tour guide, training, sales, etc.
10
E8W Wireless Amplifier
Package Contents
· Voice Amplifier.............................................................................................1 PCS · Wired Headset Microphone........................................................................1 PCS · Wireless Headset Microphone...................................................1 PCS (optional) · Handheld Microphone............................................................... 1 PCS (optional) · Strap............................................................................................................1 PCS · Charging Cable.............................................................................................1 PCS · User Manual................................................................................................1 PCS
Specifications
Voice Amplifier
· Frequency Response: 80Hz-12kHz
· Media Format: MP3, WAV
· Peak Power: 18W
· Charging Specification: USB 5V/1000mA
· Speaker Impedance: 4
· Charging Time: about 4 hours
· UHF Use Distance: 40m in open area · Playtime: about 12 hours
· Battery Type: Li-ion
· Dimensions: 125×105×55mm
· Battery Capacity: 3.7V/4000mAh
· Weight: about 340g
· UHF Frequency: 630MHz-698MHz (segmented)
· Supported Media: TF card, USB drive, up to 64G
Transmitter (Headset Mic)
· Capsule: back electret
· Charging Specification: USB 5V/200mA
· Polar Pattern: unidirectional · Frequency Response: 60Hz-16kHz · Battery Type: Li-ion
· Charging Time: about 2.5 hours · Playtime: about 5 hours · Weight: about 38g
· Battery Capacity: 3.7V/400mAh
· Sensitivity: -51 to -54dB (0db=1V/Pa/m at 1kHz)
· UHF Frequency: 630MHz-698MHz (segmented)
· UHF Use Distance: about 40m in open area
11
E8W Wireless Amplifier
Specifications
Transmitter (Handheld Mic)
· Capsule: back electret
· UHF Use Distance: 40m in open area
· Polar Pattern: unidirectional · Frequency Response: 60Hz-16kHz · Battery Type: Li-Ion · Battery Capacity: 3.7V/1800mAh
· Charging Specification: USB 5V/1000mA · Charging Time: about 2.5 hours · Playtime: about 15 hours · Weight: about 150g
· Sensitivity: -51 to -54dB (0db=1V/Pa/m at 1kHz)
· UHF Frequency: 630MHz-698MHz (segmented)
Note: The above data are measured by Takstar laboratory which has the final interpretation right!
Function Descriptions
Voice Amplifier
12
E8W Wireless Amplifier
Power switch: long press to power on/off the amplifier. LED display: display information such as the current work mode and battery level. There are five work modes, which are Bluetooth mode, USB mode, TF mode, AUX input mode and Recording mode. is the battery level symbol which does not show when power is sufficient, but flashes when power is low and requires charging in time. While charging, the battery symbol appears and then disappears when fully charged. "-- -- -- --" shows up when the amplifier is idle for 15 minutes and enters standby status. Press any key to wake up the amplifier. Volume + button: press to increase the volume level. Volume - button: press to decrease the volume level. M mode button: when powered on, short press it to switch among work modes, accompanied by corresponding voice prompt. Once an AUX audio source or a TF card is inserted, the device will automatically switch to AUX mode or TF mode. While a storage device and a mic are connected, long press this button to enter recording mode, accompanied by a "REC" symbol on LED display and a "Recording mode" voice prompt. During recording, the LED display shows recording duration in "00:00" format. Long press this button again to exit and save recording. Upon exiting recording mode, the device will automatically play the newly recorded audio in a loop. Previous track button: short press to switch to the previous track; long press to decrease reverberation. Play/Pause button: short press to play or pause the music; long press to enter/ exit single track loop; while in Bluetooth mode, long press to exit Bluetooth mode. Next track button: short press to switch to the next track; long press to increase reverberation.
13
E8W Wireless Amplifier
TF card slot: insert a TF memory card following the labeled direction until you hear a click to install it in place. To remove the TF card, press it down until it clicks to eject the card. Tip: Please make sure the audio files in the TF card are stored in MP3 and/or WAV format, otherwise it won't be readable and may even damage the device. Please format the TF card to FAT16 or FAT32 file system before copying songs, because other file system (e.g., exFAT, NTFS) will cause failure to save recordings or play songs. USB interface: insert a USB flash drive to play audio files. MIC input: insert a wired mic to start wired voice amplification. Do not point the mic capsule towards the loudspeaker to avoid feedback. AUX input: connect to a playback device (e.g., phone, tablet, MP3 player) via a Ø3.5mm audio cable, so to use the amplifier as an active speaker. Charging port: charge the amplifier via a Type-C charging cable. Please use a standard 3C-certified 5V/1A adapter to charge the amplifier. Strap clip: used to install the shoulder strap for wearing the amplifier across shoulder. Battery compartment: 3.7V/4000mAh Li-ion battery inside.
14
E8W Wireless Amplifier
Handheld Microphone
Power button: long press for 1s to power on,
or long press for 2s to power off. When powered
off, long press for 5s to start pairing. When
paired successfully, press once to change
frequency.
Indicator light: lights up blue when
powered on and battery level is normal;
flashes red and blue if low power and requires
charging; illuminates solid red while charging and
goes off when fully charged; flashes blue while pairing
(hold the power button for 5 seconds when powered
off), and resumes solid blue once paired successfully.
Charging port: charge the mic via a Type-C charging
cable.
Headset Microphone
Headset Mic
LED Display
15
E8W Wireless Amplifier
Power switch: toggle switch to ON or OFF to power on or off respectively. Charging port: connect to a Type-C cable with a power adapter for charging. M button: used for changing frequency, refer to "Pairing Method" section for details. [+] button: press to increase mic volume. In pairing mode, press or long press to gradually/rapidly change to previous channels. [-] button: press to decrease mic volume. In pairing mode, press or long press to gradually/rapidly change to next channels. Power indicator: light's off when the power is off and not charging; lights up solid blue when powered on and power is sufficient; flashes blue if low power; illuminates red while charging and goes off when fully charged. LED display: display info such as working channel, mic volume and power setting. Working channel/mic volume: display the current operating channel by default; 40 working channels in total, "01-40". Volume level is displayed for 3s when you press volume [+]/[-] button, 9 levels in total, "U1-U9". LED display goes off automatically after 10s without any operation. High/Low power switch: press both [M] and [-] buttons at the same time to switch to low power, LED display shows E0; or press both [M] and [+] to switch to high power, LED display shows E1. (Use distance is around 10m when set to low power, or around 40m when set to high power)
Operation Instructions
A. Pairing Method The products are paired by factory default and will automatically connect to each other once powered on. No extra pairing is required. If there is signal interference, follow the below steps to re-pair or change frequency:
16
E8W Wireless Amplifier
Handheld Microphone: 1. Pairing Method When the handheld mic is powered off, hold the power button for 5 seconds to enter pairing mode, indicated by flashing blue LED indicator. Meanwhile, immediately power up the amplifier, wait until the flashing LED on handheld mic turns solid blue to finish pairing. You should be able to hear voice amplification when talking to the mic. If there is no sound when you talk to the handheld mic, that means the pairing is not successful, please retry the above steps to re-pair. 2. Changing Frequency Power up both the amplifier and handheld mic. After successfully paired, press the power button on the mic once to change frequency. If successful, the blue indicator should flash for 2s before resuming solid blue.
Headset Microphone: 1. Pairing Method First, power off both the headset mic and the amplifier. Next, power up the headset mic, long press mic [M] button for 3s until its LED display shows a circle. Then, immediately power up the amplifier, wait until the headset mic's LED circle changes into a static number. Talk towards the mic to test if your voice is amplified and if pairing is successful. If the amplifier is not powered on within 10s after the mic enters pairing mode, the mic will exit pairing mode and its LED circle will change back to a static number. No sound when talking to the headset mic means the pairing is not successful, please retry.
17
E8W Wireless Amplifier
2. Changing Frequency Make sure that the headset mic and the amplifier are already paired, then power up both devices at the same time. Press the mic [M] button to change frequency, and the channel number on headset LED display will flicker. Then, press or long press volume [+]/[-] button to cycle through frequency gradually/rapidly, and press [M] again to confirm frequency, or leave it auto confirmed after 3s idleness.
B. Bluetooth Pairing Upon first use, you need to connect this device to your phone or Bluetooth device, following below steps: Power up the amplifier, press [M] to switch to Bluetooth mode and start Bluetooth discovery and pairing, indicated by a "BLUE" symbol. Enter SETTINGS menu on your phone, find and enable Bluetooth, wait until "TAKSTAR E8W"is discovered and tap on it to connect. When connected successfully, there will be a voice prompt about "Bluetooth Connected". Devices such as cell phones, laptops, tablets, and iPads can play music via Bluetooth thereafter. The next time you switch to Bluetooth mode, the amplifier will automatically connect to the previously paired device, signaled by a voice prompt "Bluetooth connected".
18
E8W Wireless Amplifier
Safety Instructions
To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use: 1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or high-volume level for extended time to avoid product malfunction. 2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local after-sales service for repair. 3. Power adapter used, if any, should be approved by CCC certification or similar standards and comply with the power supply requirements. 4. Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction. 5. The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling. 6. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident. 7. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local after-sales service.
19
E8W Wireless Amplifier
Label Meanings
This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.
20
E8W Wireless Amplifier
About This Manual
This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet. For the latest version/more information, please visit our website: https://www.takstar.com/
21