Groov-e GV-BT800 Bluetooth Sports Earphones

User Guide

1. Introduction

Thank you for choosing the GV-BT800 Bluetooth stereo earphones. This manual will help you operate the earphones. Please familiarize yourself with the Bluetooth functionality of your Bluetooth devices before using the earphones.

Safety Rules

Please follow the guidelines explained in this manual closely to ensure your safety before using the earphones.
Be careful of any sharp edges on the packaging etc.
These earphones do not contain any reusable parts, so please do not modify or dismantle them. Doing so may invalidate your warranty and could cause electric shocks or fires.
Do not use any abrasive or volatile liquids to clean the earphones.
Do not use the earphones in a hazardous location.

2. Pack Contents

1 x Bluetooth headset
2 x Extra pairs sport buds
1 x Micro USB charging cable
1 x User manual
1 x Carry pouch

3. Connection Diagram

1. Charge Interface

2. Indicator Light

3. Multifunction Button

4. Volume+

5. Volume-

6. Microphones

7. Glowing Cable

8. Glowing Cable Control Button

4. How to Use

4.1 General Functions

Function	Action
To turn on	Press and hold the "[multifunction button]" for 3 seconds (The red LED slowly flashes and a beep can be heard).
To enter the pairing mode	Ensure the earphones are off and press and hold the "[multifunction button]" for 6 seconds. (The blue LED and red LED flash alternately and two beeps can be heard).
Pairing	When in pairing mode, the earphones will be discoverable to your mobile device. Refer to your device's pairing instructions.
Play/Pause	Press the "[multifunction button]" to play when the device is pausing, and press to pause when the device is playing.
Volume up	Press "+" for volume up.
Volume down	Press "-" for volume down.
To switch cable lights on/off	Press and hold the glowing cable control button. To change the frequency of the flashing lights, press the button once (to switch between slow flash or quick flash).
To turn off	Press and hold the "[multifunction button]" for 3 seconds when the device is on (a tone voice beep and all LED is off).
Low battery warning	The red LED flashes.
To Charge the earphones	Plug the micro USB connector into the micro USB port on the earphones, then plug the USB adaptor into a suitable USB charger. When charging, the red LED light will be illuminated.
To answer a call	Press the "[multifunction button]" for 1 second.
To end a call	Press the "[multifunction button]" for 1 second.
To switch a phone call between the phone and the earphones	Double click the "[multifunction button]" during the call.
To reject call	Press the "[multifunction button]" for 2 seconds to reject the call when the call is ringing.
Last number redial	Double click the "[multifunction button]" when connected or during music playback.
To perform a factory reset	Whilst in charging mode, short click the "[multifunction button]". The blue LED will flash twice; the earphones will now be restored to the factory setting.

4.2. Pairing to Bluetooth devices

To use your Bluetooth Stereo earphones, you must first pair them with your Bluetooth device. Once your earphones are paired to a specific device, they will remain paired when they are within range.

4.3 You can pair two devices at the same time.

After pairing the first device, switch off the Bluetooth function on the first device. Then turn on the second device to pair with the earphones. After the second device is successfully paired with the earphones, switch the Bluetooth mode on the first device back on. Both devices are now connected to the earphones, and music can be selected from either device.

Pairing to a Bluetooth device:

Turn on your device and ensure its Bluetooth function is activated.
Turn on the Bluetooth Stereo earphones and go to pairing mode.
Set your mobile device to scan for mobile devices.
After a few seconds, your device will discover the earphones under "GV-BT800". Select it, and your device will confirm the pairing.
You can listen to music and any other sort of entertainment with your device, enjoying all the audio through the earphones. You can control your device with the earphone controls, e.g., Volume up/down and previous/next tracks.

Pairing to a computer:

If your computer does not have Bluetooth functionality, a Bluetooth adapter will be required. Connect the adapter to your computer and ensure its Bluetooth function is activated.
Turn on the device and go to the pairing mode.
Open the Bluetooth software (such as Blue Soleil) installed on your computer and select the "Search your Bluetooth devices" function. Refer to your user manual of the Bluetooth software for more information.
After a few seconds, the GV-BT800 will list in the Bluetooth software of your computer as a discoverable device. Select this icon and click the right button of the mouse to select "pairing", then select "connect with audio device" with the right button on the mouse.
Open your media player software to play music, watch TV/movies, and play video games. The audio effect will now be played back through your earphones.

4.4. Charging your device

The device is easy to connect to a USB mains charger. Make sure the headphones are fully charged for at least 3.5 hours before initial use. Insert one end of your USB cable into a charger or USB port on a PC and the other end into the Micro USB socket on the headphones. While charging, the red LED light is on constantly. When charging is completed, the red LED turns off.

4.5. Earpieces

Ensure you assign the "R" to the right ear and the "L" to the left ear.
One ear at a time, hook the ear-hook around the ear.
Ensuring that the fin is pointing towards the "R" and "L", twist the ear-hook to secure the ear-fin into your inner ear lobe. This will ensure the best fit. Please put the sound hole in the right position as indicated by the arrow.
This is a standard guide for getting the best fit, as all your ears are different, please adjust for your own personal best fit.

5. Technical specification

Specification	Details
Bluetooth Specification	CSR Version 4.1
Bluetooth Profile	HSP, HFP, A2DP, AVRCP
RF Range	≥10m
Frequency Response	20Hz-20 KHz
Speaker rated power	0.35V
Signal-To-Noise	≥95dB
THD+N	≤1.0%
Charging Time	≤3Hours
Talk time	≥6-8hrs (glowing cable off) / ≥5hrs (glowing cable on)
Music time	≥6-8hrs (glowing cable off) / ≥4 hrs (glowing cable on)
Standby time	≥180hrs (glowing cable off) / ≥13 hrs (glowing cable on)
Dimension (LxWxH)	180 X160 X35 mm
Weight	100g

6. Service and Support

If your device is not performing as expected, please contact your original point of purchase (ensure you have your warranty/proof of purchase available).

7. Battery Remove/Disposal

Your product contains batteries which cannot be disposed of with normal household waste. Doing so may harm the environment. Please find out about your local council rules on battery disposal to prevent damage to the environment. Should your product develop a fault and your battery needs replacing, or for further advice and information on how to safely remove your battery, please visit our website at www.groov-e.co.uk. You can contact Groov-e via email: info@groov-e.co.uk. Or via post: Groov-e, Unit J, Braintree Industrial Estate, Braintree Road, Ruislip. HA4 0EJ, UK.

Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling advice.

groov-e

Unit J, Braintree Industrial Estate

Braintree Road, Ruislip

Middlesex, HA4 0EJ, UK

	groov-e GV-BT1500 Connect Wireless Headphones User Manual Comprehensive user manual for the groov-e GV-BT1500 Connect wireless headphones, detailing features, setup, operation, specifications, and warranty information.
	Groov-e GV-TW01 PlayBuds True Wireless Earphones: Easy Start Up Guide & Specifications Comprehensive guide for Groov-e GV-TW01 PlayBuds True Wireless Earphones, covering setup, operation, pairing, charging, calls, music playback, specifications, battery disposal, and warranty information.
	Groov-e GV-TW02 SoundBuds True Wireless Earphones: Easy Start Guide Learn how to set up and use your Groov-e GV-TW02 SoundBuds True Wireless Earphones with this easy start guide. Covers charging, pairing, basic operations, specifications, and guarantee information.
	Groov-e GV-TW05 VibeBuds True Wireless Earphones - Easy Start Up Guide This guide provides instructions for setting up and using the Groov-e GV-TW05 VibeBuds True Wireless Earphones, including charging, pairing, basic operations, and specifications.
	Groov-e GV-SW01 Action Smart Watch User Manual User manual for the Groov-e GV-SW01 Action Smart Watch, covering setup, operation, features, troubleshooting, and warranty information.
	Groov-e GV-SB04 Soundbar 110W All-in-One Bluetooth Soundbar User Manual Comprehensive user manual for the Groov-e GV-SB04 110W All-in-One Bluetooth Soundbar, detailing features, specifications, setup instructions, operation guides, troubleshooting tips, and warranty information.
	Groov-e GV-SB02 Soundbar50: 50W Compact Bluetooth Soundbar User Manual User manual for the Groov-e GV-SB02 Soundbar50, a 50W compact Bluetooth soundbar. Includes features, specifications, setup, operation, and warranty information.
	groov-e GV-TW10 Ultra Buds: Active Noise Cancelling True Wireless Earbuds Quick Start Guide Get started with your groov-e GV-TW10 Ultra Buds. This guide provides instructions on setup, pairing, charging, features, and specifications for these Active Noise Cancelling True Wireless Earbuds.