Saferly

LED STANDING LAMP

SKU: MED-115

The diagram illustrates the components of the LED Standing Lamp. Key parts include:

Lampshade (灯罩): The part that covers the light source.
Switch (开关): Located on the lamp arm for turning on/off and adjusting settings.
Lamp Arm (灯臂): The adjustable arm that holds the lampshade.
Lamp Pole (灯杆): The main vertical support of the lamp.
Power Adapter (电源适配器): Connects the lamp to the power source.
Lamp Base (底座): The stable base that supports the lamp pole.
Knob (旋钮): Used for adjusting height and angle.
Set Screws (固定螺丝): Used to secure the lamp pole sections.

Assemble the Lamp Body: Locate the segmented lamp poles. Align and screw each section together tightly.
Attach to the Base: Align the bottom pole with the base plate. Secure the pole to the base using the provided fastening mechanism. Ensure the connection is stable and upright.
Connect the Power Adapter: Insert the power adapter plug into the corresponding port on the pole.
Power the Lamp: Plug the adapter into a standard wall outlet.

Adjust Height & Angle: Use the adjustment knobs along the lamp pole to raise or lower the lamp head and modify its angle for optimal lighting.
Turn On/Off & Adjust Light Settings: Use the integrated switch to turn the lamp on or off. If applicable, tap or press the switch/button again to toggle through light temperature or brightness levels.