Instructions for D-Link models including: D-Link, Internet, Connection, Failover, to, 4G, LTE, USB Adapter, Setup, DSR-1000AC, DSR-500AC

Ilya Karachevtsev

How to Setup Automatic Internet onnection Failover to 4G ...

How to Setup Automatic Internet onnection Failover to 4G LTE US Adapter in DSR-1000A / DSR-500A DSR-1000AC / DSR-500AC firmware ver. 3.17B302T

How to Setup Automatic Internet Connection Failover to 4G ...

Make sure that “Use Primary WAN port” is set to “WAN1” (if your primary Internet link is connected to WAN1 of the router).

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 7 Pages, 464.39KB

How to Setup Automatic Internet Connection Failover
to 4G LTE USB Adapter in DSR-1000AC / DSR-500AC
DSR-1000AC / DSR-500AC firmware ver. 3.17B302T

DSR-500AC / DSR-1000AC

DWM-222

Step 1. Go to Network > Internet > WAN Mode:

D-Link Technical Support ­ How to setup DSR-500AC / 1000AC with L2TP Service

Page 2 of 7

Under "WAN Mode" choose the "Auto Rollover using WAN port" option. Make sure that "Use Primary WAN port" is set to "WAN1" (if your primary Internet link is connected to WAN1 of the router). Set "Use Secondary WAN port" to "WAN3" (your USB 4G LTE adapter will be set as WAN3 in the next step).

D-Link Technical Support ­ How to setup DSR-500AC / 1000AC with L2TP Service

Page 3 of 7

Step 2.

Plug compatible 3G/4G USB adapter into USB port 1 or port 2 of the router. The D-Link DWM-222 is recommended as a compatible adapter. Go to Network > Internet> WAN3 Settings:

D-Link Technical Support ­ How to setup DSR-500AC / 1000AC with L2TP Service

Page 4 of 7

Configure your 3G/4G LTE connection with APN details given by your provider. In our example we are using Telstra SIM.

Click on "Save". The setup is now complete.
D-Link Technical Support ­ How to setup DSR-500AC / 1000AC with L2TP Service

Page 5 of 7

To test your 3G/4G connectivity unplug your primary Internet connection from the router's WAN1. Wait for about 30 seconds and check if your Internet connection has been reestablished via the USB 3G/4G adapter:
Go to Status > System Information > Device

D-Link Technical Support ­ How to setup DSR-500AC / 1000AC with L2TP Service

Page 6 of 7

Check the WAN3 connection status:

End of Document
D-Link Technical Support ­ How to setup DSR-500AC / 1000AC with L2TP Service

Page 7 of 7