OFFICIAL LIGHT STICK

Light Stick Self-Diagnosis Function

1. Launch the mobile app and select Self mode.
2. Press and hold the two buttons on the light stick simultaneously for more than 2 seconds, and check if the LED flickers blue.
3. Blinking blue indicates that the light stick has entered Bluetooth mode. Connect the mobile app to the light stick.
4. When “Bluetooth Connection Request” pops up on the mobile app, press “Register” (two pop-ups).
5. Check if the color of the light stick image on your mobile application screen matches the color of your light stick, and then select either “Confirm” or “Cancel”.
6. Choose the color you want from the palette on your mobile application screen. Check if the color of your light stick changes accordingly.
7. If the color changes to the selected color, the Bluetooth function is working correctly.
8. If the Bluetooth function is deactivated on your mobile app, it may fail to connect to your light stick.
9. If the app is not operating properly, close the application and turn on the Bluetooth function of your smartphone, then relaunch the mobile application.
10. After running the mobile application, repeat processes 1 to 6, and check if Bluetooth is operating properly on your light stick.

Quick Start Guide

Inserting and Replacing Batteries

1. Turn the battery cover at the bottom of the product handle counterclockwise to take out the battery holder inside.

2. Insert 3 alkaline batteries (AAA) into the battery holder as shown in the picture. The spring part of the battery holder is the negative (-) terminal, and the part without a spring is the positive (+) terminal. Ensure correct polarity when inserting batteries.

3. Insert the battery holder combined with the batteries in the direction of the arrow marked on the handle of the product, and close the battery cover by turning it clockwise.

Turning the Product On or Off

Press and hold [Button 1] to turn on the product. When the product is powered on, it enters Basic mode.

Press and hold [Button 1] to turn off the product.

Using Basic Mode

Press [Button 1] to change the LED color (White > Green > Pink > Blue > Orange > Yellow).

Press [Button 2] to change the LED blinking speed. The speed cycles through Slow > Normal > Fast > Light on (Blink off).

Press and hold [Button 2] to switch to Color Shaking mode.

Using Color Shaking Mode

Press and hold [Button 2] while the product is on to switch to Color Shaking mode. The LED changes color every time you shake the product (White > Green > Pink > Blue > Orange > Yellow).

Press and hold [Button 2] to switch back to Basic mode.

Using Bluetooth Mode

Turn on your smartphone's Bluetooth mode and press and hold [Button 1] and [Button 2] simultaneously. The LED flashes blue and the product attempts to connect to the smartphone via Bluetooth. When the Bluetooth connection is complete, the LED color will change to the color you set in the app.

Press and hold [Button 1] and [Button 2] simultaneously to switch to Basic mode.

Note: The buttons are not operated in Bluetooth mode, which is not a performance issue. Connection between the smartphone and Bluetooth may be lost intermittently during use. Bluetooth version 4.2 or higher is required.

Using Concert Mode (Wireless Control Mode)

Enter your ticket information to use Concert mode at offline concerts. You can map your ticket information directly through the official light stick app or visit a Pairing booth at the concert venue. After pairing, turn on the product to enter Concert mode (Wireless control mode).

Note: The buttons are not operated in Concert mode, which is not a performance issue. If you cannot pair your smartphone with the product, visit the Pairing booth at the concert venue for support.

Precautions for Handling

1. Avoid hot and humid places and keep it at room temperature when storing.
2. Avoid looking directly at the LED light up close.
3. Please note that dropping the product or applying an excessive impact may affect the color of the LED.
4. Be careful not to swallow the parts or put them in your mouth.
5. Be careful as it may cause malfunction if a strong impact is applied to the product or if it comes into contact with water.
6. If the product is damaged, stop using it and do not arbitrarily disassemble, repair, or modify the product.
7. When the battery life is over, use a new battery, and when not in use for a long time, remove the battery.
8. Keep used batteries out of reach of infants and children or dispose of them at a designated disposal site.
9. Use genuine AAA batteries and be sure to check the (+) and (-) terminals when inserting the battery. Incorrect installation may pose a risk of product damage, burns, and fire.
10. This product may cause interference during wireless operation.

Product Warranty

This product is manufactured through a strict quality control and inspection process.

In the event of a breakdown during normal use by the consumer, free repair will be provided during the warranty period.

When requesting repairs, be sure to present this warranty.

The warranty is valid only for purchases made through an official store, so please keep the purchase receipt.

The warranty period is 3 months from the date of purchase.

* Failures caused by consumer negligence are not covered by the warranty.

Paid Repair Processing Regulations

1. When the warranty period has expired.
2. In case of failure or damage due to excessive use or carelessness.
3. In case of failure due to natural disasters such as flood, fire, earthquake, etc.
4. If you want to replace the case due to scratches that occurred during use.
5. In case of using a repair center other than the official repair center or disassembling, repairing, or modifying the product at will.

Product Specifications

Email address for repair: light-stick.support@hybecorp.com

Warranty period: 3 months from the date of purchase (Receipt verification required)

Regulatory Information

This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, but if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device and its accessories must accept any interference received, including interference that may cause undesired operation.

Product Part15.21 statement: Changes or modifications not expressly approved by the manufacturer (or party responsible for compliance) could void the user's authority to operate the equipment.

FCC ID: 2ADTG-NEWJEANSOLS

This product complies with the "Administrative Regulations for Low-Power Radio-Frequency Devices" of Taiwan:

Article 12: Any company, firm, or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design without permission.

Article 14: Low-power radio-frequency devices shall not affect flight safety or interfere with legal communications. If interference is found, the device shall be suspended immediately and improved until no interference occurs before it can be used again. The aforementioned legal communications refer to radio communications operated in accordance with telecommunications regulations. Low-power radio-frequency devices must tolerate interference from legal communications or industrial, scientific, and medical (ISM) radio-frequency devices.