Narvitech NS110 HD60 Pro Quick Guide
Your guide to live streaming and recording with the NS110 HD60 Pro.
Package Contents
- Narvitech NS110 Video Capture Wand
- USB 2.0 Micro to Type A Cable
- HDMI Cable
- Quick Guide
- Cyberlink Key
Parts and Ports
| # | Part Name |
|---|---|
| 1 | Record Button |
| 2 | Micro SD Card Slot |
| 3 | Snapshot (SD Card Mode) |
| 4 | Mode Switch (SD/PC) |
| 5 | HDMI In Port |
| 6 | Micro USB Power Input |
How to Live Stream / Record on PC/Laptop
Step 1: First, connect the NS110 to a camera via HDMI cable. (Note: Different camera models have different HDMI port configurations; please prepare the appropriate HDMI cable.)
[Diagram Description: Shows a camera connected to the NS110 via an HDMI cable. Labels indicate the camera, HDMI cable, and NS110 device.]
Step 2: Then, connect the NS110 to a PC/Laptop via USB cable. Switch the NS110 to PC mode using the Mode Switch (labeled 'PC').
[Diagram Description: Shows the NS110 connected to a PC/Laptop via a USB cable. The Mode Switch on the NS110 is shown set to 'PC'. Labels indicate the NS110, USB cable, and PC/Laptop.]
Step 3: After setup, open your preferred software (e.g., Screen Recorder 4, OBS) and start live streaming or recording immediately!
[Diagram Description: Shows a PC with a software interface open, indicating live streaming or recording is active. The NS110 is shown connected to the PC.]
LED Indicator Status (PC Mode)
| LED Color | Status |
|---|---|
| Green | Ready to record |
| Green flashing | Recording (PC mode) |
| Red | No Video Input |
| Blue | SD card reader mode (activated by holding the record button in SD card mode when connected to PC) |
| White flashing | Firmware Update |
How to Record the Screen on Camera (SD Card Mode)
Step 1: First, set up your camera on a tripod. Connect an HDMI cable to the camera. (Note: Different camera models have different HDMI port configurations; please prepare the appropriate HDMI cable.)
[Diagram Description: Shows a camera mounted on a tripod, with an HDMI cable connected to the camera.]
Step 2: Connect the NS110 to the camera via HDMI cable. Power up the NS110 using a power bank. Switch the NS110 to SD card mode using the Mode Switch (labeled 'SD') and insert a Micro SD card into the slot.
[Diagram Description: Shows the camera connected to the NS110 via HDMI. The NS110 is connected to a power bank via Micro USB and has a Micro SD card inserted. The Mode Switch is shown set to 'SD'. Labels indicate the camera, HDMI cable, NS110, power bank, and Micro SD card.]
Step 3: Secure the NS110 and power bank onto the tripod (Velcro tape is recommended). Press the record button on the NS110 to start recording. Press the button again to stop recording.
[Diagram Description: Shows the NS110 and power bank attached to the tripod. A hand is shown pressing the record button on the NS110. Labels indicate the NS110, power bank, tripod, and record button.]
(For more information about SD card recording, visit the Narvitech official website > Support.)
LED Indicator Status (SD Card Mode)
| LED Color | Status |
|---|---|
| Green | Ready to record |
| Green flashing | Recording (SD card mode) |
| Red | No Video Input |
| Red flashing | Micro SD card not inserted (SD card mode) |
| Blue | SD card reader mode (activated by holding the record button in SD card mode when connected to PC) |
| White flashing | Firmware Update |
Additional Information
For more information, please visit Narvitech.com.
For support and FAQs, visit the Narvitech official website:
- NS110 User Manual: Narvitech official website > Support > Download > NS110
- NS110 FAQ: Narvitech official website > Support > FAQ > NS110
(The original document also contains Chinese text for support contact, which is merged into the English instructions.)
Narvitech