Shangxing Technology B5 Switch Power Bank with Magnetic Clip

Quick Start Guide

Package Contents

• B05 Power Bank x1
• Switch Magnetic Clip x1
• Switch 2 Magnetic Clip x1
• USB-C To USB-C Short Cable x1
• USB-C To USB-C Cable (1m) x1

Product Description

This document provides a quick start guide for the Shangxing Technology B5 Switch Power Bank with Magnetic Clip. It includes instructions for attaching the magnetic clip, charging the power bank, and understanding the LED indicators.

LED Indicator Guide

Charging Status

• Charging: White LEDs display current battery percentage (last LED flashes continuously).
• Full Charge: All 4 white LEDs remain solid (100% battery level).

Discharging Status

• Normal Discharging: 4 white LEDs remaining battery level + 1 blue LED is constantly on.
• Low Battery Warning (<5%): Last white LED flashes rapidly.
• Simultaneous Charging/Discharging: Blue LED flashes in breathing mode.
• Foreign Object Detected: Blue LED flashes rapidly.
• When iPhone reaches 80% battery level: Enters slow charging mode and the blue light stays on.

Note: To protect the battery, charging will automatically stop after 35 hours, and the current power level will be displayed.

Compatibility

Magnetic Wired Charging via Clip

Compatible with: Switch/Switch OLED/Switch2 (Excludes Switch Lite).

Magnetic Wireless Charging

Magnetic Wireless Charging Area: Compatible with iPhone 12-16 series or Mag-safe cases. Supports 15W Max Qi2-certified wireless charging.

iPhone 12-16 series models (compatible with Mag-safe cases): Other Qi2/QI wireless charging standard devices.

Note: The Switch back clip is compatible with Switch/Switch OLED, while the Switch 2 back clip is only compatible with Switch 2.

Switch Magnetic Charging Clip Set

1. Align the clip's positioning protrusion (A) with the Switch rear groove (B), then press vertically until the buckle is locked.
2. Precisely align the power bank's charging zone (C) with the clip's magnetic alignment ring (D) for secure magnetic attachment.
3. Connect the power bank's USB-C port (E) to the console's charging port (F) using the included cable to activate power delivery.

Switch 2 Magnetic Charging Clip Set

1. Align the two (A) protruding points on the clip with the two (B) slots on the console to attach the clip.
2. Align the magnetic area (C) of the power bank with the magnetic ring area (D) on the clip to securely attach the power bank.
3. Connect the USB-C port at point (E) on the power bank to the USB-C port at point (F) or (G) on the console using the charging cable to begin charging.

Specifications

General Notes

• Power Button: Short press to power on. Double press to power off. Long press to activate low-current mode (for fully charging low-power devices like smartwatches or earbuds).
• USB-C Input/Output: Supports 30W Max charging power (charges the power bank itself or external devices).
• Battery LED Indicator: Displays remaining battery level.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance; such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.