Bambu Lab X1E Combo 3D Printer

Component Introduction

Tool Head: The primary component for printing, including the nozzle and cooling systems.

Touch Screen: The interface for controlling the printer and viewing status.

Glass Cover Plate: Protects the build chamber.

Chamber Camera: Allows monitoring of the printing process.

Build Plate: The surface on which the 3D model is printed.

Auxiliary Part Cooling Fan: Cools the printed parts.

Bambu Micro Lidar: Used for calibration and bed leveling.

Air Filter: Filters air within the build chamber.

Pause Button: Temporarily stops the printing process.

Screen Sleep/Wake Button: Puts the screen to sleep or wakes it up.

Chamber Heater Unit: Maintains a stable temperature within the build chamber.

PTFE Tube: Guides filament from the AMS to the tool head.

Belt Tensioner: Ensures proper tension for the printer's belts.

Excess Chute: Collects excess filament during purging.

Bambu Bus Port (4-Pin): Connection for accessories like the AMS.

Ethernet Port: For wired network connectivity.

Power Socket: Connects the printer to a power source.

AMS (Automatic Material System) Introduction

Buckle: Secures the AMS cover.

Bambu Bus Cable 6-Pin Interface: Connects the AMS to the printer.

Filament Outlet: Where filament exits the AMS.

Desiccant: Absorbs moisture to keep filament dry.

Filament Inlet: Where filament spools are loaded into the AMS.

Accessory Specification

• Touch Screen: The primary user interface.
• Spool Holder: Supports filament spools.
• Filament (x3): Sample filament spools included.
• Complete Hot End Assembly: The part that melts and extrudes filament.
• Nozzle Wiping Pad (x2): Cleans the nozzle.
• Unclogging Pin Tool: Used to clear nozzle clogs.
• Allen Key H1.5: Small Allen key for adjustments.
• Allen Key H2: Larger Allen key for assembly.
• Power Cord: Connects the printer to power.
• Spare Filament Cutter (x2): For cutting filament.
• Bambu Bus Cable-6Pin: Connects the AMS.
• Bambu Bus Cable-4Pin: Connects other accessories.
• Flexible Build Plate: The removable printing surface.
• Bambu Scraper: Tool for removing prints from the build plate.
• Glue for Build Plate: Adhesive to improve print adhesion.

AMS & Tool Head Unlock Procedure

1. Take out the accessory box and filament swatches. Use the short end of the Allen Key (H2) to unlock screws more easily.
2. Take out the AMS by sliding it out through the top.
3. Remove the four screws as indicated by the arrows.
4. Take out the AMS cushioning.
5. Take out the cushioning.
6. Remove the cardboard from the tool head. Remove the foam from the excess chute.

AMS Assembly

Connect the 550mm PTFE Tube and 370mm PTFE Tube from the AMS to the printer.

Connect the Bambu Bus Cable-6Pin and Bambu Bus Cable-4Pin to the appropriate ports on the printer.

*The 6-pin cable can be plugged into either interface.

Spool Holder Assembly

1. Remove the screw as pictured with an Allen Key (H2).
2. Secure the spool holder with two screws from the accessory box.

Hot Bed Unlock & Screen Installation

1. Remove the three screws with an Allen Key (H2) to unlock the hot bed.
2. Pull the Flexible Printed Circuit (FPC) out about 50mm.
3. Insert the FPC into the port by pressing the terminal as pictured.
4. Insert the screen back into the slot on the printer, then lock it by pushing it to the left.

Connectivity

The X1E supports both Wi-Fi and Wired (Ethernet) connections. Ethernet is prioritized.

• Wi-Fi Setup: Select your preferred Wi-Fi network from the list. A checkmark will indicate the connected network.
• Wired Setup: Plug the Ethernet cable into the port to connect. The screen will show 'Connected'.
• You can connect using both Wi-Fi and Ethernet simultaneously.

Printer Binding

1. Download the Bambu Handy App. Register and log in to your Bambu Lab account.
2. Connect the printer to power and follow the on-screen instructions until the QR code page appears.
3. Use Bambu Handy to scan the QR code displayed on the printer's screen to bind your printer with your Bambu Lab account.
4. Follow the on-screen instructions to complete the initial calibration. Minor vibration and noise during calibration are normal.
5. DO NOT remove the protective foam from beneath the hot bed until after the initial calibration is complete.

Warnings Regarding AMS Usage

• When operating the AMS, it is recommended to use Bambu Filament, which has been thoroughly tested.
• Avoid using soft materials like TPU or damp PVA, as they can get stuck in the AMS.
• The AMS supports spool widths of 50 mm – 68 mm. Using filament with plastic spools that fit correctly inside the AMS is highly recommended. If using cardboard spools, a spool adapter is advised to reduce slippage and debris.
• If you encounter issues with specific filaments, contact Bambu Lab support for assistance.