Konnek Stein QC21SE Indoor Security Camera Quick Start Guide

1. Product Introduction

This section introduces the components included with the Konnek Stein Indoor Security Camera QC21SE.

The package typically includes:

Camera
USB Power Cord
Power Adapter
Screw Kit
Mounting Bracket
User Manual

The package contents are: Camera X1, USB Power Cord X1, Power Adapter X1, Screw Kit X1, Mounting Bracket X1, User Manual X1.

2. Camera Information

This section details the parts of the Konnek Stein Indoor Security Camera. Please do not force the camera to turn manually.

Camera Components:

1. Light Sensor
2. Lens
3. Microphone
4. TF Card Slot
5. Speaker
6. Reset Button
7. Power Interface

3. Install the App

To set up your camera, follow these steps:

Scan the QR code provided to download and install the "Smart Life" app.
Alternatively, search for "Smart Life" in the App Store or Google Play to download the app.
Sign up for and log into your Smart Life account.

If you encounter issues connecting the device, please contact Customer Service via email at customerservice@ttinno.com. The app is subject to updates.

4. Connecting Device

Ensure your phone is connected to a 2.4GHz Wi-Fi network before proceeding. Power on the camera.

Step 1: Reset the Camera

Long-press the reset button located on the back near the power interface for approximately 8 seconds. You will hear a short "beep beep beep" prompt tone upon successful reset. If you do not hear the tone, repeat the reset steps. After a successful reset, you will hear "beep beep" every 10 seconds, indicating the device is ready for pairing. Note: The device must be reset before establishing a new connection.

Step 2: Add Device in App

Open the "Smart Life" app. Click "add device" or the "+" icon in the upper-right corner. Select "add device". Choose "Camera&Lock" and then select "smart camera (Wi-Fi)". Tick the box confirming "Make sure the indicator is flashing quickly or a prompt tone is heard" and click "Next". This step is performed when you hear the "beep beep" prompt tone every 10 seconds. If the camera is not beeping, press and hold the reset button for 8 seconds to reset it. Note: This device does not have an indicator light.

Step 3: Connect to Network

Enter your Wi-Fi password to connect the device to the network (only 2.4GHz networks are supported). The app will generate a QR code. Use the camera to scan this QR code. A "beep beep beep" prompt tone will be heard upon successful scanning. Click the "I heard a prompt" button to begin adding the device.

Step 4: Confirmation

If the interface shows "1 device(s) added successfully" (similar to Picture 7), the camera has been added. The interface may then jump to a preview screen (similar to Picture 8). From the homepage (similar to Picture 9), you can click the added device to view its monitoring status.

5. App Video Interface Information

This section describes the live video interface within the "Smart Life" app.

1. Camera Name: Displays the name assigned to the camera.
2. Switch Video Quality HD/SD: Toggles between High Definition and Standard Definition video streams.
3. Time Stamp: Shows the date and time of the current recording or stream.
4. Edit Camera Settings: Accesses settings to configure the camera.
5. Sound Switch: Toggles audio on or off.
6. Zoom in: Allows digital zooming of the video feed.
7. Unfold the function bar: Expands or collapses the control panel.
8. Record a video clip and save it to gallery: Starts recording a video clip and saves it.
9. Microphone: Press to enable two-way or one-way audio communication.
10. Screenshot: Captures a still image of the current video feed and saves it to the gallery.
11. Full-Screen Mode: Expands the video feed to fill the entire screen.
12. Playback: Allows viewing of videos saved on the microSD card.
13. Gallery: Accesses the folder containing saved screenshots and video clips.
14. Theme Color: Switches between Light Mode and Dark Mode for the app interface.
15. Private Mode: Enables or disables a sleep mode for the camera.
16. Motion Tracking: Automatically tracks movement of objects within the camera's view.
17. Motion Detection: Configures the camera to send push notifications when motion is detected.
18. Edit: (Duplicate of 4) Accesses camera settings.
19. Message: Displays alarm notifications.
20. Direction: Controls the pan-tilt movement of the camera.
21. Cloud: Accesses the Cloud Storage Service (this service may incur charges).

6. Product Installation

Instructions for mounting the camera:

Place the mounting bracket on the wall, mark the hole positions with a marker pen, and then punch the holes.
Insert the plastic anchors into the punched holes.
Secure the mounting bracket to the wall using a screwdriver and screws.
Finally, attach the camera to the mounting bracket.

Note: The camera can be installed in both upside-down and normal orientations.

7. Basic Parameters

Product Name: Indoor Security Camera

Product Model: QC21SE

Video Resolution: 2.0MP, 1920*1080

Video Coding-Decoding Technology: H.264

Image Enhancement: Digital Wide Dynamic, 3D Noise Reduction

Storage: TF Card/Cloud Storage

Wireless Encryption: WEP / WPA / WPA2

Power Input: 5V - 1A (Min)

Total Power Consumption: 5W (Max)

Wireless Standard: 2.4G 802.11 b/g/n

Compatible System: Android/iOS

Notes:

To reset the camera: Long-press the reset button for 8 seconds. You will hear three beeps upon successful reset.
Please insert a TF card with a speed of Class 10 or above to avoid abnormal storage issues.
Video files on the TF card will be cyclically overwritten when storage is full. To protect user privacy, stored data is encrypted to prevent leakage even if the TF card is lost.

8. Points For Attention

Keep the device away from metal objects.
Avoid placing the camera on the back of furniture or inside a microwave oven.
Keep the camera away from audio cables, video cables, and USB cables as much as possible.
Ensure the camera is within Wi-Fi signal range. If the connection is unstable, try switching to a different network within range.
To change to a new network: First, delete the device from the app (press the device on the home page for approximately 1 second until "Delete device" appears, then confirm). Next, press and hold the reset button on the device for approximately 8 seconds, and then start connecting to the new network.

9. The Name and Content of Hazardous Substances in the Product

Part Name	Pb	Hg	Cd	Cr(VI)	PBB	PBDE
Shell	○	○	○	○	○	○
Board	X	○	○	○	○	○
Charger	○	○	○	○	○	○
Annex	○	○	○	○	○	○

This form is based on the provisions of SJ/T 11364.

10. Other Information

This product complies with the environmental requirements of RoHS. Currently, there is no mature technology available globally to replace or reduce the lead content in electronic ceramics, ceramics, optical glass, steel, and copper alloys.

FCC ID: 2AVTM-QC21SE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

WARNING: This product can expose you to chemicals, including lead (Pb), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Certifications: CE, FCC, WEEE Symbol [♻️]

Made in China

Customer Service Email: customerservice@ttinno.com. Any support needed or feedback is welcome.