Manual-Hub.com - Free English product PDF Documents!
User Manual for eBeam models including: Touch 4K 75 Inch Interactive Screen, Touch 4K, 75 Inch Interactive Screen, Interactive Screen, Screen
EBEAM TOUCH (01) PDF MANUAL - MANUAL-HUB.COM
File Info : application/pdf, 18 Pages, 1.61MB
DocumentDocumentUSER MANUAL - 0 - https://manual-hub.com/ Thank you for purchasing the eBeam Touch. To fully utilize this product, please read the user manual in detail before use. Be sure to keep the manual in a convenient location to easily access support whenever needed. SAFETY PRECAUTIONS Do not expose the unit to direct sunlight for extended period of time. Do not place the unit under high temperatures. The power supply is AC100V-240V, 50Hz/60Hz. Please check and ensure AC source is grounded. Please use the antenna isolator during installation. WARNING Do not attempt to open the cabinet to avoid any electrical shock. Consult your appliance dealer or local service provider if you have a problem with the unit. Please do not place any liquids on the unit. Be sure to unplug the power supply before cleaning. The front of the display panel is protected by reinforced glass, but can still be damaged if the panel is dropped face down or if the panel is striked with a hard object. If the front glass is cracked, please be cautious of broken glass. Please check and ensure AC source is grounded. Please ensure the unit is mounted on a stable surface. Please be aware of the high voltage inside the unit when the red light is on. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. - 2 - https://manual-hub.com/ Table of Contents SAFETY PRECAUTIONS .................................................................................................................................. 2 WARNING..................................................................................................................................................... 2 Outlook of Display........................................................................................................................................ 4 Open the package .................................................................................................................................... 4 I/O on Front Panel........................................................................................................................................ 5 I/O on Back Panel ......................................................................................................................................... 5 Attention.................................................................................................................................................. 6 Power Supply ........................................................................................................................................... 6 Battery Installation....................................................................................................................................... 6 Insert Batteries ........................................................................................................................................ 6 Caution..................................................................................................................................................... 6 Remote Control Instructions........................................................................................................................ 7 Remote Control Functions ........................................................................................................................... 7 Main Interface ....................................................................................................................................... 10 System Setting Operation .......................................................................................................................... 12 Picture Menu ......................................................................................................................................... 12 APK File Installation ............................................................................................................................... 15 Computer Ports and Connect Operations (Optional)................................................................................. 17 Computer Terminals .............................................................................................................................. 17 CAUTION ................................................................................................................................................ 17 Command form: [F6][Command][Set ID][Data][CS][6F]........................................................................ 18 Recycle ................................................................................................................................................... 18 - 3 - https://manual-hub.com/ Outlook of Display Open the package Supplied Accessories Power cable Remote control User Manual Handwriting pen USB cable (Optional) HDMI cable (Optional) Certificate Warranty card Tools package Front View - 4 - https://manual-hub.com/ Function Instruction I/O on Front Panel Function Instruction I/O on Back Panel Power Front Panel Button - 5 - https://manual-hub.com/ Attention Please pay attention to the display terminal function while it is connected to other equipment. Please read this manual carefully if terminal function is not clear. Before connecting with other equipment, please power off and make sure the input and output are connected correctly. If the display unit is inactive for a long period of time, please power down, and disconnect the power plug. Power Supply Connect the display's AC cord to a power outlet (AC110240V, 50/60HZ). Power on the panel by pressing the red LED indicator light (standby mode). Press the power button on the remote control or use the keyboard on the panel. The display unit is ready to use when the red LED indicator light turns blue. Switch back to standby mode before powering off. Battery Installation Insert Batteries 1. Remove the cover located on the back of the remote control 2. Insert two "AAA" batteries 3. Place the cover back Caution Do not mix new and old batteries. Do not use different types of batteries together (i.e. manganese and alkali ). If the barttery is not rechargeable, do not recharge the battery. Please remove battery when not in use. Please give dead batteries to the recycle department. - 6 - https://manual-hub.com/ Remote Control Instructions Do not drop the remote control. Avoid applying any physical impact to the remote control. Keep the remote control in a cool and dry environment. Any liquid contact may cause damage or malfunction. Replace battery when power is insuffient. Remote Control Functions - 7 - https://manual-hub.com/ Remote Control Buttons Function Description 1 POWER 2 MUTE 3 P-Mode 4 Sound 5 Zoom 6 Sleep 7 8 9 10 11 12 13 Page 14 Page 15 HDMI 16 VGA 17 PC 18 Media 19 Menu 20 Exit 21 22 23 24 25 Enter 26 Back 27 Source 28 VOL+ 29 VOL30 Windows 31 Channel+ 32 Channel33 PC Power 34 1 Power Mute Sound On/Off Change Picture Mode Change Sound Mode Zoom In/Out Sleep Reverse Fast forward Previous track Next track Play/Pause Stop the current playback Page Up Page Down HDMI Input VGA Input PC Input Switch to Media Signal Android Home Page Exit Up Left Down Right Enter/Select Previous Page (Android only) Toggle through Input Source Increase Volume Decrease Volume OPS Windows Channel Up Channel Down PC Power 1 - 8 - https://manual-hub.com/ 35 2 36 3 37 4 38 5 39 6 40 7 41 8 42 9 43 44 0 45 2 3 4 5 6 7 8 9 Freeze Frame 0 Child Lock NOTE: Functions related to PC will only work if internal PC is installed. Operating Instruction Channel Selection 1. Channel up (+) and down (-) Press (+) to select a higher channel. Press (-) to select a lower channel. 2. 0-9 keypad Enter the channel number. Display will change accordingly to channel. Sound Volume Adjustment Press the volume +/- to adjust the sound level.The dot will move [ left for Volume Down ] or move [ right for Volume Up ] . To mute the sounds, click the mute icon. To close the mute function, click the mute icon again. - 9 - https://manual-hub.com/ Main Interface NOTE: Normal display is pictured above. - 10 - https://manual-hub.com/ Icon Function Description Open / Close Sidebar Source Selection VGA 1 VGA 2 CVBS YPBPR HDMI 1 HDMI 2 HDMI 3 OPS PC Back Toolbar Screen Shot Media Browser System Setting Volume Adjustment - 11 - https://manual-hub.com/ Open File Annotation Recently Opened Apps Home System Setting Operation Press Toolbar to display the System Setting. Use the "/" arrows to navigate through the Picture/Sound/Setting/Time menu. Picture Menu - 12 - https://manual-hub.com/ Sound Menu Setting Menu - 13 - https://manual-hub.com/ Time Menu Source Menu - 14 - https://manual-hub.com/ Input Signal Switching Over Press "Source " button, showing Source Menu, then use / to navigate each Source, Press "ENTER" to make your selection. APK File Installation 1. Insert USB stick or SD card with APK files, open the files in the main page 2. Find SD card or USB external storing disk in the left menu column, open and all files will show on the right column. - 15 - https://manual-hub.com/ 3. Find the APK files in the external saving files, click and install. Download and Install APK online. If needed, download and install APK online. Be sure the SD card is inserted into the main board before downloading APK. You will not be able to download APK files if SD card is not inserted. - 16 - https://manual-hub.com/ Computer Ports and Connect Operations (Optional) eBeam Touch Panel is equipped with OPS Slot for optional OPS operation. Please follow the picture below to insert OPS unit into the monitor. Please turn off power before installing OPS Computer Terminals CAUTION The power and the signals are connected by 80-pin connector. If removed from the main unit, please check and remove any clogging in the pin connector before reinserting. It is recommended to keep the connector clean. - 17 - https://manual-hub.com/ RS232 Com-port Function Setting and Encode Table RS232 connects with computer or center equipment. Open the RS232 Com-port and make sure the settings are the same as below. Port number:COM1(Based on the port number of computer or center control) Bit rate 9600 Odd-even verify: no Data: 8 Stop bit: 1 The key operation function is the same as the remote control key pad. Turn on Turn off Mute on Mute off display AV1 F6 01 01 01 F9 6F F6 01 01 00 F9 6F F6 02 01 01 FA 6F F6 02 01 00 F9 6F F6 30 01 0027 6F F6 30 01 0128 6F AV2 F6 30 01 0229 6F HDMI1 HDMI2 CH+ CHS-VIDEO COMP ONENT(component) PC-RGB F6 30 01 0930 6F F6 30 01 0A31 6F F6 37 01 002E 6F F6 37 01 012F 6F F6 30 01 052C 6F F6 30 01 062D 6F F6 30 01 082F 6F Command form: [F6][Command][Set ID][Data][CS][6F] 1. Command is function encoding. 2. Set ID display (equipment encoding)is 1 3. Date can make the real function data. 4. CS verify code is CS=F6+Command +Set ID+Data,if CS is greater than FF, then get the lower two number ,for example CS=12A,Then is 2A 5. F6, 6F are beginning code and ending code of command. The data above and below is hexadecimal (except special explain), the length is 1 byte, ellipsis OX for convenience. (1) Volume adjust :F6 0B 01 DATA CS 6F (DATA 0-64 decimalize volume 0-100) (2) Channel: F6 36 01 DATA CS 6F (DATA 0-63 decimalize channel 0-100) Recycle For disposal of unit, please refer to the local management organization about the display, battery, and pack material. Please recycle the abandon product or deliver the unit to the apprpopiate garbage disposal station. It can be reused after cleaning, disassemble, or crushed. - 18 - https://manual-hub.com/