HOMCOM 824-012V70 Mist Fan

Dear customer, Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user's manual. If you have any questions, please contact our customer care center. Our contact details are below:

Customer Support Contact Information

Important Safety Precautions

[Warning] When using electric devices, basic safety precautions must be observed. To avoid the risk of burns, electric shocks, fire, and/or personal injury, please read the instruction manual carefully before using the device, and observe all of the instructions during the operation of the device.

General Guidelines

• Electronic devices are not toys! Keep children away from the device!
• Only use the devices for its intended purpose.
• The device is only suitable for use in private households and not for commercial use.
• Do not leave the device unsupervised while in use or connected to the mains.
• Switch off the device if it is not in use, in the event of malfunctions and for cleaning, and also remove the power plug.
• Do not carry the device by the power cord.
• Keep the device clean and dust-free.
• Never use the device outdoors.
• Check the device regularly for signs of visible damage. Do not use the device if you have determined damage, if the device has fallen down or if it does not function properly. Do not attempt to repair the device yourself.
• Repairs are only allowed to be carried out by qualified specialists.
• The power point must be located near to the device so that the plug can be removed easily in an emergency.

Hazards Due to Electric Current

• The voltage stated on the name plate of the device must agree with the voltage of your mains electricity network.
• Only connect the device to a power socket that has been installed properly. Do not use a power strip or an extension cable.
• Never operate the device using a timer or another remote contract device.
• Never touch the device, the power cable and the plug with damp or wet hands or if you are standing on wet ground.
• Do not place the power cord in the sink.
• Do not immerse in water. Immersing the device in water or other fluids leads to a risk to life of electric shock!
• Keep the device, the power cable and plug away from hot surfaces, naked flames, direct sunlight and sharp edges.
• When using the device make sure that the cable is not jammed (e.g. in doors).
• When you pull the plug out of the power socket, always pull on the plug and never on the cable.
• If the power cable of this device is damaged it has to be replaced by a correspondingly qualified person to prevent hazards. The same applies to the plug.

Hazards to People

• These devices can be used by children aged 8 years and above and by people with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge, if they are supervised or instructed in the safe use of the product and understand the hazards involved.
• Children must not play with the appliance.
• Cleaning and maintenance of the product must not be performed by children.
• Children do not recognise the hazards which can arise when handling electrical devices. Keep children away from the device. Pay particular attention when using the device if children are in the vicinity!
• Keep the packaging materials such as plastic bags and polystyrene parts out of the reach of children. Danger of suffocation!
• When laying the cable make sure that it cannot become a tripping hazard.
• Make sure that the device itself cannot be tripped over.

Article-Specific Hazards

• Make sure that the device isn't dirty and that it is assembled correctly.
• Never operate the appliance on uneven surfaces or in the vicinity of steps. Avoid tipping the device over when it is in use (e.g. if there are borders on the floor).
• The pedestal fan may only be used if it is fully assembled. Check all screw / plug connections at regular intervals. Re-tighten loose screws and ensure that plug connections are properly adjusted.

Overview of Appliance

The appliance consists of the following parts:

1. Air outlet grating
2. Holder
3. Time control
4. Speed control
5. Mode control
6. Oscillation control
7. ON/OFF button
8. Power plug
9. Stand base
10. Screws
11. Remote control

Assembling the Stand

Follow these steps to assemble the stand:

1. Take all of the appliance parts out of the packaging and remove all packaging materials and inserts.
2. Turn the fan upside down so that you can access the holder (2). (See Fig. 1, which shows the base with the central holder).
3. Attach part 1 of the stand (9) to the holder (2) using one screw. (See Fig. 2, which shows the two parts of the stand base, and Fig. 3, which illustrates the screw attachment).
4. Route the power cord through part 2 of the stand (9) and press it into the outlet hole.
5. Attach part 2 of the stand (9) to part 1 of the stand (9) using two screws. (See Fig. 4, which shows the final assembly of the stand).

Handling the Appliance

Power

• Press the ON/OFF button (7) to turn the appliance on or off.

Speed

• Press the ON/OFF button (7) to power on the appliance.
• Press the Speed button (4) to select the fan speed.
• There are 3 speed settings available: Low, Mid, and High.

Mode

• Press the ON/OFF button (7) to power on the appliance.
• Press the Mode button (5) to select the fan mode.
• There are 3 modes available: NORMAL, NATURE, and SLEEP.
• The default mode is NORMAL. The SLEEP/NATURE modes will be indicated by a light.

Timer (0.5 - 7.5 HOURS)

• Press the ON/OFF button (7) to power on the appliance.
• Press the Timer button (3) to set the desired time period (0.5-7.5 Hours).
• The appliance will remain in operation until the selected period of time runs out.
• After the timer runs out, the device will turn off automatically.

Oscillation

• Press the ON/OFF button (7) to power on the appliance.
• Press the Oscillation button (6) to activate oscillation. The appliance will swing from Left to Right.

Remote Control

• All functions can be set using the remote control.

Cleaning and Maintenance

Before cleaning the appliance, always disconnect the power plug from the receptacle.

• The appliance, the power cord, and the power plug should not be immersed in water or other liquids when cleaning. Clean them with a dry cloth.
• If the appliance is very dirty, the exterior can be wiped carefully with a moist cloth and then dried carefully. Ensure that no moisture penetrates into the interior of the appliance.
• Do not use harsh cleaners, steel brushes, scouring powder, or other hard objects to clean the appliance, as these can cause scratches on the surfaces.
• Clean the appliance regularly.
• Never use solvents, benzene, or oil-based cleaners, as these can damage the housing.
• Re-tighten visible screw connections on the appliance regularly to ensure the device is functioning properly.

Disposal

Used electric household devices

1. If you no longer wish to use your electrical appliance, return it free of charge to a recycling depot for used electric appliances.
2. Used electric devices do not belong in the household garbage (see [recycle symbol]).

Further disposal instructions

1. Return the electrical appliance in a condition that does not adversely affect its later reuse or recycling. Batteries must be removed in advance, and the destruction of parts containing fluids must be avoided.
2. Electrical appliances can contain harmful substances. Improper handling or damage to the appliance can lead to health problems or water or ground contamination when the appliance is recycled later.

Specifications

Made In China

All images serve as illustrations only and do not always show exact representations of the device.