Lorex 4K Ultra High Definition IP Bullet Security Camera

See It All in 4K Resolution

View superior 4K Ultra HD resolution video with 4× the detail of 1080p. Featuring the latest in professional grade video technology ensuring clear identification, indoors and outdoors. Introducing industry leading H.265 compression, offering significant bandwidth and video storage capacity over older compression technologies.

Features

• Ultra HD 4K image sensor delivers 4x the detail of 1080p
• 4K video recording provides ultra HD quality even when zoomed, offering clearer identification in video evidence
• Color Night Vision™ delivers full color nighttime video for improved recognition of objects in low light conditions
• IR night vision range up to 130ft (40m) in ambient lighting and 90ft (27m) in total darkness
• ClearNight imaging for improved low light performance and improved recording efficiency
• H.265 offers significant bandwidth and video storage savings over older compression technologies, extending the amount of video stored on the hard drive
• Intelligent compression saves recording space by optimizing video performance based on available bandwidth
• Wide angle 88° field of view (horizontal)
• Ceiling / wall mountable
• Simple camera installation using a single CAT5e cable with Power over Ethernet (PoE)
• 60ft (18m) CAT5e cable included per camera
• Extend the camera's video and power with a single Ethernet cable up to 300ft (91m) from the recorder
• Cold climate capability (-22°F / -30°C)
• Weatherproof Ethernet connector cover for a protective seal against the elements
• Weatherproof metal housing for outdoor & indoor installation (IP66 Rated)

Key Specifications Summary

• 4K Ultra High Definition
• 88° Field of View
• 130ft (40m) / 90ft (27m) Night Vision
• Indoor/outdoor

Product Information

Detailed Specifications

Dimensions

The camera body is approximately 2.8 inches (70mm) in diameter. The mounting bracket extends about 4.2 inches (106mm) from the base. The total length from the back of the bracket to the front of the lens is approximately 7.1 inches (180mm).

Installation Diagram

The diagram shows two connection methods for the camera:

1. Connect an Ethernet cable from the camera to the NVR's PoE ports. The camera will power up automatically.
2. Alternatively, connect the Ethernet cable to a router or switch on your network. A separate 12V DC power adapter (not included) is needed if the router/switch does not support PoE.

Disclaimers

• Compatibility is limited to Lorex HD LNR600/LNR610 Series NVRs. For the most current compatibility list, please visit www.lorextechnology.com/compatibility.
• Full color nighttime video typically transitions to black & white IR night vision when light levels drop below 1 lux, ensuring optimal low-light image quality.
• Stated IR illumination range is based on ideal conditions with typical outdoor ambient lighting and total darkness. Actual range and image clarity are influenced by installation location, viewing area, and the light reflection/absorption level of objects. In low light, the camera will switch to black and white.
• To utilize H.265 compression, the camera must be connected to a supporting H.265 NVR. Instructions for enabling H.265 compression are available at lorextechnology.com/support.
• This product is not designed for submersion in water. Installation in a sheltered location is recommended.