ATTACK SHARK R3 TRIPLE MODE LIGHTWEIGHT MOUSE
Welcome
Thank you for purchasing our product. We hope you will have a new operation and feel. We will continue to provide you with better products and services.
Product Description
| Product model | R3 |
| Product interface type | USB-Type-C |
| Product connection method | USB, 2.4G, Bluetooth |
| Product optical sensor | Original phase PAW3395 |
| Transmission frequency | 2402MHz – 2480MHz |
| Rate of return (HZ) | 2.4G mode: 125/250/500/1000/2000/4000/8000 Hz (driver adjustable) Mode adjustable: 125/250/500/1000 HZ (default driver adjustable) Bluetooth mode: 125HZ (the driver is not adjustable) |
| Frame rate (IPS) | 600IPS |
| Maximum acceleration (G) | 50G |
| DPI value and corresponding color | 800 (red) -1200 (green) -1600 (blue) -3200 (light blue) -6400 (purple) -9600 (violet) -12800 (yellow) -25600 (white) |
| Current charge | 280mA |
| Charging voltage | 5V |
| Product weight | ≈53.3g |
| Product size | 119.5*61*36.3mm |
| Data cable interface (length) | Type-C 1.5 meters |
| Wireless transmission distance | 10 meters |
| Switch brand and service life | Kaihua 80 million times |
| Support operating systems | XP, Win7, Win8, Win10, Win11, Mac OS, Android, Linux, etc. |
| Sleep mode current | 60uA |
Packing List
- Mouse*1
- 2.4G Receiver*1
- Cable*1
- Instruction Manual*1
- Anti-static sticker*1
- Adapter*1
- Foot Pad*1
Button Function Description
The mouse features a standard layout with additional function buttons:
- Left Button: Primary click function.
- Right Button: Secondary click function.
- Middle Button (Scroll Wheel): Clickable scroll wheel for scrolling and middle-click actions.
- Forward Button: Typically used for navigating forward in web browsers or applications.
- Back Button: Typically used for navigating backward in web browsers or applications.
- Power Mode Switch: Located on the bottom of the mouse, allows switching between Bluetooth, OFF, and 2.4G modes.
- DPI Switch: Allows on-the-fly adjustment of the mouse's sensitivity (Dots Per Inch).
Indicator Lights:
The mouse is equipped with multiple indicator lights to provide status information:
-
Main Indicator Light (DPI/Mode): This light changes color to indicate the selected DPI level or connection mode.
- Bluetooth Mode: Flashes blue rapidly when searching for a device, and remains solid blue when successfully connected.
- 2.4G Mode: Flashes green rapidly when searching for the receiver, and remains solid green when successfully connected.
- DPI Levels: The light displays different colors corresponding to the selected DPI setting: Red (800 DPI), Green (1200 DPI), Blue (1600 DPI), Light Blue (3200 DPI), Purple (6400 DPI), Violet (9600 DPI), Yellow (12800 DPI), White (25600 DPI).
- Charging Indicator Light: This light is red while the mouse is charging and turns off when the battery is fully charged.
- Secondary Mode Indicator Light: This light indicates the active wireless mode. It is blue for Bluetooth and green for 2.4G.
Tips
- Sleep Mode: The mouse will stop working and enter sleep mode after 30 seconds of inactivity.
- Wake-up Method: Press any key to wake the mouse up.
- Hardware Connection: For first-time use, insert the product's USB plug into a USB 1.1 or higher port. The computer will automatically install the necessary hardware drivers, indicated by a pop-up in the lower-right corner of the screen.
Connection Modes
1. Bluetooth Connection Method
To connect your mouse via Bluetooth:
- Set the power switch on the bottom of the mouse to the 'Bluetooth' position. The Bluetooth mode indicator light will turn blue.
- On your computer or mobile device, enable Bluetooth and begin searching for available devices.
- Select the 'R3 Mouse' from the list of found devices. Once the connection is successfully established, the code matching light will illuminate solid blue for approximately 2 seconds before turning off.
- If the Bluetooth connection fails, switch the mouse to the 'OFF' position to disable it. Then, move the mouse and the device you are trying to pair closer together. Re-enable Bluetooth on the mouse and attempt pairing again. The mouse should then operate normally.
2. 2.4G Connection Method
To connect your mouse using the 2.4G wireless receiver:
- Set the power switch on the bottom of the mouse to the '2.4G' position. The green indicator light will begin to flash.
- Locate the 2.4G receiver (often stored in a compartment on the mouse or included separately).
- Insert the 2.4G receiver into an available USB port on your computer. Your computer will automatically detect and install the necessary drivers. The green indicator light will turn solid once the connection is established.
- If the 2.4G connection fails, switch the mouse to the 'OFF' position. Move the mouse and the computer closer together. Re-enable the 2.4G connection and try again. The mouse should then function correctly.
3. Wired Connection Method
To connect your mouse using the USB Type-C cable:
- Use the provided USB Type-C cable to connect the mouse directly to a USB port on your computer.
- When the mouse is connected via cable, set the power switch on the bottom of the mouse to the 'OFF' position.
- The mouse will now operate in wired mode and should function normally.
Precautions
Please adhere to the following safety guidelines and usage recommendations:
- ⚠️ It is strictly forbidden to immerse the mouse in any liquid or to spray it with liquids.
- ⚠️ Avoid using the mouse in environments characterized by high temperatures or high humidity.
- ❌ Do not place the mouse near open flames or heat sources.
- ❌ Do not apply excessive force or subject the mouse to physical abuse.
- ❌ Do not attempt to disassemble or repair the mouse yourself.
