Instruction Manual for WellAudio models including: C08, 2BCCC-C08, 2BCCCC08, C08 Smart Health Watch, Smart Health Watch, Health Watch
SHENZHEN YIHU TECHNOLOGY CO.,LTD C08 2BCCC-C08 2BCCCC08 c08
File Info : application/pdf, 26 Pages, 640.04KB
DocumentDocumentC08
,,
APP
APP Store APP
Android/IOS
Android 5.0 iOS9.0 4.0
APP
app " C08 " APP
WellAudio / WellAudio Dual mode WellAudio APP ,APP , ; APP
2
2 WellAudio
WellAudio
APP 8 APP WellAudio
/ WellAudio WellAudio 5 WellAudio WellAudio 5 WellAudio WellAudio
/ /,; // APP
10 3/4 app
1
APP APP ---
1. Siri Siri 2.-- 3.-- APP APP 4./--
5
6
7 5
8
9
AAP APP //
APP
APP ----
QQ,Facebook , app APP 20-40
WellAudio Android : "FitPro" "FitPro"
8 APP
""
APP // 3 APP
APP
200AM
4.0
-10~50
IOS9 /Android5.0
C08
1. 2. 3. 4. 5. APP
* * * *
Smart Health Watch
C08
Thank you for purchasing our smartwatch! Please read this manual carefully
Correct wearing
The bracelet is best worn behind the ulnar tuberosity Adjust the size to fit your wrist according to the adjustment holes; fasten the wrist strap buckle.
Keep the sensor close to the skin to avoid movement
Charging the watch
Make sure the watch has a normal battery level when you use it for the first time. If the watch cannot be turned on normally with a low battery level, please connect the charger to charge the device.
Install the Watch App on your phone and tablet
Scan the QR code or go to APP Store or App Store to download and install the APP.
Android/IOS
System requirements: Android 5.0 and above; iOS9.0 and above; Bluetooth 4.0 support.
Device connection
For first time use, you need to connect the APP for calibration, the bracelet will automatically synchronize the time after successful connection
Turn on the Bluetooth switch of the cell phone system Enter the device module settings of the app Click "Bind the Bluetooth name of the device":C08 Enter "Experience More Functions", it will automatically search the nearby Bluetooth devices of the watch, find the watch device and connect with it. After pairing success, the APP side will pop up a guide page,
according to the guidelines jump to the cell phone system Bluetooth search to find the WellAudio device and connect, after the connection is successful, you can make/receive phone calls and listen to music (Note: If the cell phone system Bluetooth has been searching for the WellAudio device can not be found, please go to the Dual mode menu under the setting is on, the You can't make calls without connecting WellAudio device.) APP will automatically save the Bluetooth address of the watch, and the watch will be searched and connected automatically when the APP is opened or running in the background. Android phone use to read all notification permissions such as contact information and phone settings to give the app to run in the background.
Functional description of the watch
Buttons: long press 2 seconds to turn on/off; short press any page to return to the dial; short press the dial page to extinguish the screen
standby page to slide down into the notification alerts, slide up into
the control center, the control center has the following flight mode, health three rings, music, do not disturb mode, QR code, style switching (dual Bluetooth switch connection icon)
Swipe left or right on the standby page to cycle through the dials.Long press for 2 seconds on the standby dial page to start the language assistant. (Note: The cell phone needs to be connected to the WellAudio device at the same time, and the smartphone side needs to set up the user's voice in the voice menu in advance) standby page tap on the screen to access the main menu
Clock Interface
After synchronizing with your phone, the watch will automatically calibrate the time;
Three Rings of Health
Total number of steps taken Wear the watch, record the daily exercise steps, you can view the current real-time steps. total distance
Estimate the exercise distance based on the number of steps walked. total calories Estimate calories burned based on the number of steps walked Heart Rate, Blood Pressure, Blood Oxygen Click on the icon to enter test mode
This graph shows the current test results of heart rate, blood pressure, blood oxygen, and ECG. (This function requires the watch to support heart rate and blood pressure sensors) Dialer
Dial pad to make phone calls (note: cell phone also requires WellAudio device to be connected) Telephone book
Add 8 frequently used contacts in APP, after successful Bluetooth connection between the watch and APP, the contacts can be synchronized to the watch phone book to display, click on the contact to make a call (Note: the phone needs to be connected to the WellAudio device at the same time) music control
The watch can control to switch the previous song, next song, pause/start playback. (Note: Cell phone needs to be connected to WellAudio device to use this function) Dual Mode Switches This switch needs to be turned on for the cell phone to search for WellAudio devices. If the cell phone is not connected to a WellAudio device within 5 minutes after the watch is turned on, the switch will be turned off automatically, and you will need to turn it on manually when using the watch again. Note: Connecting the WellAudio device and not using it for 5 minutes will automatically turn off the WellAudio function, if you turn on the music player, dialer, phonebook, voice and other related functions again, it will be activated automatically and the WellAudio function can be used normally. Physical activity Running mode
This interface allows you to record the calories burned, distance and duration of the run; Strength training model
This screen allows you to record the calories burned and duration of strength training; Soccer Mode
This screen allows you to record the calories burned and duration of the open and close jumps. Volleyball mode
This interface allows you to record the calories burned, distance and duration of the run. Basketball mode This interface allows you to record the calories burned, distance and duration of the run. Riding Mode This interface allows you to record the calories burned, distance and duration of the run. Tennis mode
This interface allows you to record the calories burned, distance and duration of the run.
sleep mode
When you fall asleep, the watch will automatically enter the sleep monitoring mode; it will automatically detect the number of times you sleep deeply/lightly/wakefulness throughout the night, and calculate the quality of your sleep; the watch side only displays the total length of deep sleep/light sleep/wakefulness, and you can view the details of the sleep data on the APP side. Note: Sleep data will be available only when you wear the watch to sleep and sleep detection starts from 10:00 p.m. Sleep data can be synchronized to the app while you sleep for 3/4 hours.
Information model
When the watch pushes more than one reminder message, enter this interface to view the last 1 message record.
Stopwatch function
Go to the stopwatch and click the start button to start the timer, click the pause button to stop it, and click the reset button to clear off the timer. Climatic Connected APP successfully, the watch can get the current weather data, APP end settings - personal information - can set the temperature unit switch (Celsius and Fahrenheit conversion) More menus
1. Voice assistant function Siri, long press Siri icon for voice function 2. About - you can view the project version number and Bluetooth name and other information 3. Language - the language can be set directly on the device side (successful connection to the APP will automatically synchronize the current language of the APP)
4.Time/Date - time and date can be set on the device side
5Backlight time setting with optional time setting
6Find a cell phone (click on the icon to enter and then click on open)
7Style switching (click on the icon to enter to switch between 5 sets of themes)
8.Take a picture (tap the icon to enter and then tap to start taking a picture after the phone displays the picture screen)
9Reset the device (tap the reset icon to enter and then tap confirm, it will clear all data from the watch)
Customized dials (change to AAP function settings) Need to connect the APP to get the dial settings, you can choose the recommended dial/default dial/album custom dial to sync to the watch
APP Functions and Settings
Personal Information
Please set up your personal information after entering the appSettingsPersonal information, you can set gender-ageheight-weight-distance
You can also set your daily goal steps and monitor daily completion.
Application Push SMS Alerts:
In the connected state, if the SMS alert function is turned on, the watch will vibrate to alert you when there is a text message. Other reminders:
When connected, if this function is enabled, the watch will vibrate to remind you when there is a message from WeChat, QQ, Facebook, etc., and display the content received by the app (you can also go into the watch information menu to check the recent message record) (you need to give the app access to the system notification privileges, and the watch side can display 20-40 words). Note: Incoming call push requires a WellAudio device to be connected
Other functions: Turn on vibration to set this function, then the watch will vibrate when there is an incoming call, message or other reminders, if you turn it off, the watch will only have a screen reminder without vibration, so as not to disturb.
Warm tips for Android users. To use the reminder function, you need to set it to allow "FitPro" to run in the background; it is recommended to add "FitPro" as trusted in the permission management and turn on all the permissions.
Alarm settings
In the connected state, you can set 8 alarms, and after setting, it will be synchronized to the watch; it supports offline alarms, and after successful synchronization, even if the APP is not connected, the watch will remind you according to the set time.
Find a Watch
When connected, tap the "Find Watch" option and the watch will vibrate.
remote photo shoot
In the connected state, start taking photos from the watch side or enter the remote control photo interface from the APP side, shake/flip your wrist/touch the watch, take photos automatically after a countdown of 3 seconds Please allow the APP to access the photo album to save the selftaken photos.
Sedentary reminders
Sedentary reminders raise one's hand and light up the screen (idiom); to signal a warning sign Enable this function when the watch is resting, lift your wrist and turn the screen to yourself to light up the screen, put down the screen will go out. Do Not Disturb mode Turn on the Do Not Disturb Mode function, you can set the Do Not Disturb time period, in the set time period, the watch stops receiving notification messages, so as not to remind the message disturbance Dial Settings Need to connect APP to get dial settings, can choose recommended dials to sync to watch Device Reset
Setting Reset This function clears all data from the watch (e.g.,
pedometer)
Remove the device
Remove Device This function wipes the data and removes the device.
Basic parameters
Equipment type smartwatch
Battery Type Capacity 200 MAH
vibration motor
operating temperature System Requirements Bluetooth Name
supports
synchronizati Bluetooth 4.0 on method
-10~50
transducers Low Power Acceleration Sensors
IOS9 or above/Android5.0 or above
C08
Caveat
1. Should not be worn for bathing and swimming. 2.Connect the watch when synchronizing data. 3.Charge with the included charging cable. 4.Do not expose your watch to high moisture, extremely high or low temperatures for long periods of time. 5.The watch appears to be dead and restarted, please pay attention to check the phone memory information clear and try again, or exit the APP to reopen.
Components
*Main unit *Wrist strap *Charging cable *Packing box and instructions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction