Solis S3 WiFi Stick User Manual
This document provides instructions for the Solis S3 WiFi Stick, a device used for monitoring solar energy systems.
Product Overview
The Solis S3 WiFi Stick is designed to connect Solis inverters to a wireless network, enabling remote monitoring of the solar power system's performance. It allows users to access real-time data and historical performance through the Solis monitoring platform.
The package typically includes:
- Solis S3 WiFi Stick
- USB Extension Cable
- User Manual
Installation and Setup
Follow these steps to install and set up the Solis S3 WiFi Stick:
- Prepare the Inverter: Ensure the inverter is powered off before proceeding with the installation.
- Connect the WiFi Stick: Locate the USB port on the Solis inverter. Insert the Solis S3 WiFi Stick into the USB port. If necessary, use the provided USB extension cable for easier access.
- Configure Network Settings: Power on the inverter. The WiFi stick will be recognized. Access the inverter's interface (usually via a local WiFi hotspot created by the inverter or a direct connection) to configure the WiFi network settings. This involves selecting your Wi-Fi network (SSID) and entering the password.
- Establish Connection: Once the network details are entered, the WiFi stick will attempt to connect to your network. A successful connection is usually indicated by a status light on the stick or within the inverter's interface.
- Register on Solis Cloud: Create an account on the Solis Cloud monitoring platform (https://www.soliscloud.com). Follow the on-screen instructions to register your inverter using its serial number or the WiFi stick's unique ID.
Monitoring Features
Once connected and registered, users can access the following features via the Solis Cloud platform:
- Real-time Data: View current power generation, voltage, current, and other key parameters.
- Historical Performance: Analyze daily, monthly, and yearly energy production data.
- System Status: Monitor the operational status of the inverter and identify any alerts or faults.
- Reporting: Generate performance reports for the solar system.
Troubleshooting
If you encounter issues, consider the following:
- No Connection: Verify Wi-Fi password accuracy, ensure the router is within range, and check inverter power status.
- Inverter Not Recognized: Confirm the WiFi stick is securely inserted and try restarting the inverter.
- Data Not Updating: Check the internet connection and ensure the Solis Cloud account is correctly linked to the inverter.
For further assistance, refer to the Solis support website or contact Solis technical support.
Specifications
The Solis S3 WiFi Stick supports standard Wi-Fi protocols (e.g., 802.11 b/g/n) and operates within a typical temperature range suitable for electronic devices.
