RIKEN Portable Oxygen Monitor OX-07
Model: OX-07
Product Overview
The RIKEN Portable Oxygen Monitor Model OX-07 is a device designed for monitoring oxygen levels in the air. It is approved by the Japanese Ministry of Labor (JML) and certified for ATEX and IECEx standards, indicating its suitability for use in potentially hazardous environments.
Key Approvals: JML approved, ATEX - IECEx approved.
Features
- Intrinsically safe ExialICT3
- Extension cable available (5m standard, 10m, 20m and 30m options)
- Maximum 5000 hours of continuous operation using 2 "AA" alkaline dry cells
- Impact resistant protective rubber boot
- Large LCD display with auto backlight
- Audible, visual, and vibration alarms
- Compact and lightweight design
- Dimensions: 66mm (Width) × 114mm (Height) × 33mm (Depth)
- Weight: 230g (instrument only)
Specifications
| Specification | Type A | Type B |
|---|---|---|
| Gas detected | Oxygen in air | |
| Detection principle | Galvanic cell | |
| Detection range (Increments) | 0.0-40.0%vol. (0.1%vol.) | |
| Alarm set point | Low alarm: 19.5%vol. High alarm: 23.5%vol. Over: 40.0%vol. | No alarm |
| Trouble alarm | Sensor disconnection, low battery, circuit failure, calibration range error | |
| Alarm types | Gas alarm: flashing light, intermittent buzzer and flashing gas value, pulsing vibration | No alarm |
| Display | Digital display | |
| Power source | Alkaline dry cells (2-AA size), 2pcs | |
| Continuous operation | Maximum 5000 hours (at 25°C, no alarm, no backlight) | |
| Safety design | Intrinsically safe (ExialICT3) | |
| Operating temp. & humidity | -20℃~+50℃: Humidity below 95% RH (non-condensing) | |
| Special functions | Manual backlight for LCD (automatically lit during alarm) Peak hold (maximum and minimum) | |
| Dimensions & weight | Approx. 66 (W)×114(H)×33(D)mm, Approx. 230g (Instrument only) | |
| Standard accessories | Hand strap | |
| Optional accessories | Extension cable 5m, 10m, 20m, 30m, Carrying case | |
Accessories
The RIKEN OX-07 Type A is supplied with a hand strap as a standard accessory. Optional accessories include extension cables in lengths of 5m, 10m, 20m, and 30m, as well as a carrying case.
Image Description: Visuals show the RIKEN OX-07 Type A with an extension cable attached, alongside separate images of a hand strap, an extension cable, and a carrying case.
Certifications and Quality
The product is associated with quality management certifications, including ISO 9001 and ISO 14001, with accreditation from JAB EMS. The manufacturing facilities are located in Tokyo and Okegawa, Japan.
Image Description: Logos and text indicating JAB EMS Accreditation RE001 for ISO 9001 and ISO 14001, along with "RIKEN FINE" and "RIKEN KEIKI" branding.
