User Manual for Telephone Est models including: ANCX, 2ACE5-ANCX, 2ACE5ANCX, XYS-ETW300W, TWS Earbuds Wireless, XYS-ETW300W TWS Earbuds Wireless
TELEPHONE EST (HK) CO., LTD ANCX Wireless Earbuds 2ACE5-ANCX 2ACE5ANCX ancx
TWS Earbuds Wireless User Manual
FCC ID: 2ACE5-ANCX
Preface Thank you for purchasing this True Wireless Stereo wireless Earbuds. This user manual will help you to use your Wireless Earbuds. Please understand and familiarize yourself with the wireless function of your mobile phone before using it. Please charge your earbuds for more than 15 minutes for the first time to prevent the product from failing to work because of low battery.
Specifications
Bluetooth name: XYS-ETW300W Bluetooth version: V5.1 Support Agreement: HFP/ A2DP/ AVRCP/ AVDTP/ GAP/ SDP Battery type: lithium-ion polymer battery Speaker Diameter : F10mm Earbud's capacity: 40mAh Charging Case capacity:280mAh (Can charge earbuds about 3 times) Call/play time: 3-4 hours Charging time of charging case: about 120 minutes Charging time of earbuds: about 60 minutes
Charging voltage / current: 5V 50mA Mode of operation: Tap Bluetooth Receiving distance: 15M (Accessible Distance) Product size: 60.9*45.1*22.5mm Standard accessories: Earbuds*2, Charging Case*1, Charging Cable*1, User Manual*1, Wing Tip*4
The above-mentioned parameters are subject to actual data.
(I) Operation Instruction
1. Charging
1) Insert the earbuds into the charging case. For best results, do not insert earbuds in the charging case if they are wet or dirty.
2) Close the charging case, plug the charging case into a USB power supply or certified wall charger. The earbuds and charging case will be charged simultaneously.
3) When the earbuds are in the charging case for charging, the indicator light on charging case will be blue and always on, when they're fully charged, the indicator light on the charging case will go off. The 4 lights on charging case will all be on at the same time when the charging case is fully charged.
While charging, the device and the charger may become hot. This does not affect the device's lifespan or performance and is in the device's normal range of operation. 2. Power on/off
1) Auto power on: Take the earbuds out of the charging case, there will be a voice prompt "Left/Right channel" first, then another voice prompt "Paring".
2) Power on manually: When the earbud is powered off, long press the earbud for 5 seconds until you hear the voice prompt "Power on ".
3) Auto power off: Put earbuds back into charging case. When the earbuds are in low battery status, there'll be voice message "Low Battery", and the earbuds will power off automatically soon after the prompt.
4) Power off manually: Long press the earbuds for 5 seconds until you hear the voice prompt "Power off ".
3. wireless Pairing and Disconnection
wireless Connection: 1) Take earbuds out of the charging case. 2) Turn on wireless on our smartphone.
3) Search and connect device "XYS-ETW300W" until you hear the voice prompt "Connected" in your earbuds. wireless Disconnection: 1) Disconnect with the earbuds on your smartphone. 2) Turn off wireless on your smartphone. 3) Take earbuds away from your smartphone. There's a voice prompt "Disconnect" in your earbuds when it's disconnected with your smartphone. Auto Connection: After you pair the earbuds to your smartphone for the first time, the earbuds will pair your smartphone automatically once they're taken out of charging case.
Note: When the abnormal operation of the user causes the phone only connect to a single earbud or cannot search for the Bluetooth name, please put the dual earbuds back into the charging case, delete the pairing record in the mobile phone, then turn off the mobile phone wireless. Then reconnect your phone with the earbuds in standard way.
4. Earbuds Operation
By squeezing the force sensor on either earbuds' stem to control your music,
phone calls, and other useful shortcuts without getting out your phone. Single squeeze on R/L earbud Play a track. Pause a track. Answer or end a call. Double squeeze Play the next track by squeezing the right earbud. Play the previous track by squeezing the left earbud. Triple squeeze Volume up by taping the left earbuds. Volume down by taping the right earbuds. Squeeze 4 time on R/L earbud Active Siri Press and hold R/L earbud for 2 seconds Cancel the calling before the it's connected. Press and hold R/L earbud for 3 seconds Turn on ANC mode, there's voice prompt "ANC on". Turn off ANC mode, there's voice prompt "ANC off". Turn on Transparency mode, there's voice prompt "Transparency".
(II) Safety Precautions
Please read and follow these instructions: 1. Keep device away from extreme heat or humid. Extreme temperatures can cause the device to deform, reduce the battery capacity of the device, and shorten the life of the device. 2. Using time may be different depending on using habits. 3. Do not listen at high volume level for long period of time to protect your hearing. 4. Stop using this product immediately if it causes discomfort or pain. 5. Do not use the device in heavy rain. Thunderstorms may cause equipment failure and increase the risk of electric shock. 6. Do not disassemble or modify the earbuds for any reason, which may cause the earbuds to malfunction or burn out. Please take the earbuds to the distributor for repair. 7. Keep equipment and accessories out of reach of children and pets to avoid accidents. 8. Do not put the product in the water.
(III) Warm Tips
The wireless working distance is about 15 meters. The earbuds have been
through strictly quality testing when they leave the factory. The occasional signal jam is related to the surrounding environment. For example, there are many wireless signals in the surrounding environment, or there are obstructions blocking the signal, etc. It is recommended that you try another environment or location if signal jam happens. FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
The product is too small to place complete label information, so the label is placed in the charging bin.
15
XYS-ETW300W V5.1 HFP/ A2DP/ AVRCP/ AVDTP/ GAP/ SDP F10mm 40mAh 280mAh ( 3 / 3-4 120 60 /5V 50mA 10M 60.9*45.1*22.5mm
*2*1*1*1*4 ()
1.
1 2 3) 4
2.
1"Left/Right channel" "Pairing" 2 3 "Power On" 3) "Low battery" 4) 5 "Power Off"
3.
1 "XYS-ETW300W""Connected" 2 "Disconnect" 3 "Connected"
4.
R/L /
R
L
R/L Siri
R/L 2
R/L 3 "ANC on" "ANC off" "Transparency"
1. 2. 3.
4. 5. 6. 7. 8.
15
WPS 文字