HF1 Intelligent Multifunctional Formaldehyde Monitor

Product Overview

The HF1 Intelligent Multifunctional Formaldehyde Monitor is a high-performance electronic testing equipment designed for indoor formaldehyde testing and monitoring the effect of formaldehyde treatment. It is suitable for pricing and indoor formaldehyde treatment effect assessment.

Packing List

• HF1 Intelligent Multifunctional Formaldehyde Monitor
• Charging cable
• Instructions for use
• Recommended power adaptor

Security Instructions

• Do not cause damage to the equipment.
• Avoid detection in high temperature and high humidity environments.
• Do not disassemble or modify the internal components.
• Use the recommended power adaptor for charging.
• The device complies with relevant standards.

Basic Parameters

Detection Value:

• 0-0.06mg/m³: Formaldehyde value within national air quality standards.
• 0.08-0.30mg/m³: Formaldehyde value higher than national air quality standards.
• >0.10mg/m³: Formaldehyde value higher than national air quality standards.

Indicator Light Color:

• Orange: 0.08-0.30mg/m³
• Red: >0.10mg/m³

Detection Resolution: 0.001mg/m³

Battery Capacity: 2200mAh lithium battery

Operation Instructions

Formaldehyde Monitoring Mode

After powering on, the device enters formaldehyde monitoring mode by default. It displays the current formaldehyde reading. A short press of the power button switches between formaldehyde reading, temperature display, and clock display.

Clock Setting

Press and hold the power button for 3 seconds to enter the clock setting mode. Use the +/- keys to adjust the hour and minute values. Short press the power button to confirm each setting.

Brightness Adjustment

The screen brightness is automatically adjusted. A short press of the power button lights up the screen. The screen automatically turns off between 22:00 and 6:00 daily.

Data Storage

The device has a data storage capacity.

Material and Process Requirements

• Material: 128gsm coated paper
• Process: Printing, Die-cutting
• Process Requirements: Correct color tone, firm printing, accurate overprinting, color registration, die-cutting deviation ≤±0.5mm
• Color and Spot Color: Pantone Cool Gray 8C + CMYK
• Texture Requirements: None

Product Identification

Product ID: HF1

SKU Code: 6971720841591

Product Name: HF1 Intelligent Multifunctional Formaldehyde Monitor

Product Model: HF1

PCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Names and Contents of Hazardous Substances

O: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in SJ/T 11364-2014.

X: Indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirement specified in SJ/T 11364-2014.