eufy HomeVac S11 Lite Owner's Manual

Important Safety Instructions

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANER

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

• Fully assemble before operating.
• Intended for household use only.
• Do not use outdoors or on wet surfaces.
• Do not leave this appliance unattended when it is plugged in. Unplug it from the outlet when not in use and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer recommended attachments.
• For recharging, use only the detachable power supply unit provided with this device.
• Do not use with a damaged cord or plug. If the appliance is not working as it should, or has been dropped, damaged, or submerged in water, contact customer service for advice.
• Do not handle the plug or appliance with wet hands.
• Do not unplug the adapter by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
• Do not put any object into openings or vents. Do not use if any opening is blocked. Keep free of dust, lint, hair, and anything else that may reduce airflow.
• Keep hair, loose clothing, fingers, and other body parts away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Always turn off this appliance before connecting or disconnecting the motorized floor brush.
• To prevent unintentional starting, ensure the appliance is switched off before installing the battery pack, picking up or carrying the appliance. Do not carry the appliance with your finger on the power switch, doing so may cause accidents.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
• Do not use without the dust collector and/or filters in place.
• Store this appliance indoors, in a cool and dry area.
• Make sure that the outlet voltage corresponds to the voltage rating on the charger's label.
• Recharge only with the charger (US: YLJXA-T265050; UK: YLJXA-U265050; AU: YLJXA-A265050; EU: CZH015265050EUWH) specified by the manufacturer. A charger suitable for one type of battery pack may cause a risk of fire when used with another battery pack.
• Do not attempt to repair or disassemble this appliance. There are no user-serviceable parts inside. Repair or service must be performed by a qualified repairman and only identical replacement parts can be used. This will ensure the safety of the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
• This appliance includes a rechargeable lithium-ion battery pack. Do not expose the battery pack or appliance to fire or excessive temperature (above 130°C), as it may catch fire and/or explode.
• Use this appliance only with specifically designated battery packs. Use of any damaged or modified battery packs may create a risk of injury and fire.
• Charging, using, and storage of the appliance should be within the ambient temperature range of 5-40°C.
• Follow all charging instructions and do not charge the battery pack out of the temperature range specified in the instructions, otherwise, it may damage the battery and increase the risk of fire.
• Do not attempt to disassemble the battery pack.
• The battery must be removed from the device before the device is disposed of.
• This appliance must be disconnected from the mains supply when removing the battery.
• The used battery should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing this appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.

SAVE THESE INSTRUCTIONS

Notice

♻ This symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obliged to take back your old appliance for disposal at least free of charge.

Overview

Diagram of the eufy HomeVac S11 Lite showing its components:

• High-performance filter
• Suction mode button
• Pre-filter
• Dust collector
• Dust empty button
• Release button (for metal tube)
• Metal tube
• Floor brush release button
• LED headlights
• Lithium battery pack
• On/off switch
• Battery pack holder
• Dust collector release button
• Floor brush cleaner head

Diagram of wall mounting accessories:

• Wall plugs
• Wall mounting accessories (bracket)
• Screws
• Charging adapter

Diagram of additional cleaning tools:

• Release button (for tools)
• Charging socket
• LED indicators (LED 1, LED 2, LED 3)
• Lithium battery pack
• Sofa Cleaning Tool
• 2-in-1 combination tool

Assembling

ℹ Attach your desired cleaning accessory to the metal tube as illustrated.

Assembly steps:

1. Attach the metal tube to the main vacuum body. Push until it clicks.
2. Attach the floor brush cleaner head to the other end of the metal tube. Push until it clicks.
3. Alternatively, attach the sofa cleaning tool or 2-in-1 combination tool directly to the main vacuum body or to the metal tube. Push until it clicks.

Wall Mounting

ℹ The vacuum cleaner cannot stand on its own. Make sure it is mounted securely.

Wall mounting steps:

1. Mark the drilling points on the wall. The distance between the two top holes is 3.57 inches (91mm).
2. Drill holes and insert wall plugs.
3. Secure the wall mounting bracket with screws.
4. Attach the charging adapter to the wall mounting bracket.
5. Hang the vacuum cleaner on the mounted bracket for storage and charging.

Recharging

The vacuum cleaner is powered by the rechargeable lithium battery. Before first use, charge the battery for more than 5 hours.

• ℹ The vacuum cleaner cannot work while charging.

• ℹ The vacuum cleaner cannot be charged when the ambient temperature is above 40°C.

Charging methods:

• Method A: Connect the charging adapter directly to the charging socket on the main vacuum body.
• Method B: Place the vacuum cleaner on the wall mounting bracket, ensuring the charging adapter is connected to the bracket's charging port.

Lights during charging

Lights during vacuuming

Lights when in trouble

Using

Before use, make sure that:

• the battery is fully charged.
• the dust collector and filters are cleaned, dried, and fixed in place.

Operation:

1. Press the ON/OFF switch to turn on the vacuum cleaner.
2. Press the suction mode button to switch between Standard suction power (default) and Max suction power.

⚠ Do not use the vacuum cleaner to clean up liquid spills.

Maintenance

Empty the Dust Collector

Steps to empty the dust collector:

1. Press the dust empty button to open the dust collector lid and empty debris.
2. Alternatively, press the dust collector release button to detach the dust collector from the main body.
3. Open the dust collector lid and empty the contents.

Clean the Dust Collector

Steps to clean the dust collector:

1. Press the dust collector release button to detach the dust collector.
2. Remove the pre-filter and high-performance filter from the dust collector.
3. Empty the dust collector.
4. Wash the dust collector with cold water.
5. Ensure the dust collector is completely dry (allow 24 hours).
6. Reassemble the filters and dust collector.

Clean the Filters

Wash the filters with cold water at least once every month. Ensure the filters are completely dry before reassembly.

Steps to clean the filters:

1. Remove the high-performance filter and pre-filter.
2. Wash both filters with cold water for at least 1 minute.
3. Allow filters to air dry completely for 24 hours before reassembly.

Clean the Rolling Brush

Steps to clean the rolling brush:

1. Press the floor brush release button to detach the floor brush cleaner head.
2. Remove the rolling brush from the cleaner head.
3. Clean any hair or debris wrapped around the rolling brush.
4. Reinsert the rolling brush and reattach the cleaner head.

Specifications

Customer Service

For FAQs and more information, please visit www.eufylife.com.

Warranty:

• HomeVac unit: 24-month limited warranty
• Lithium battery pack: 12-month limited warranty

Contact Information:

• Email: support@eufylife.com, support.mea@anker.com (For Middle East and Africa Only), service@myeufy.com.au
• Website: www.eufylife.com
• Phone numbers and operating hours for various regions are provided in the manual.

Australia & New Zealand Warranty

This warranty subsists for 15 months from the date of purchase. It covers defects resulting from faulty manufacturer workmanship or materials. This warranty is in addition to rights under the Australian & New Zealand Consumer Law. For full terms and conditions, refer to the original document or contact Directed Electronics Australia customer service at +61 3 8331 4800 (Mon-Fri 8:30am - 5:00pm AEST) or service@myeufy.com.au.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device. If interference occurs, try reorienting the receiving antenna, increasing separation between equipment and receiver, connecting equipment to a different circuit, or consulting a dealer/technician. Responsible party for FCC matters: POWER MOBILE LIFE, LLC, 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541, USA. Telephone: +1 (800) 988 7973.

ISED Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

EU Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type T2503 is in compliance with Directives 2014/35/EU & 2014/30/EU. The full text of the EU declaration of conformity is available at https://www.eufylife.com/.

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type T2503 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at https://www.eufylife.com/.