HD Seat Bolt Mount
Installation Guide
Product Components
The HD Seat Bolt Mount system consists of the following primary components:
- A: MagConnect Adapter: Features a magnet ? and a precision dial for secure attachment.
- B: Heavy Duty Arm: An extendable arm with joints controlled by knobs ⚙️.
- C: Seat Bolt Mount Base: Includes various brackets (180°, 90°, 45°) and hardware for mounting to a vehicle's seat bolt.
- D: Modules, Cases, Holders: Sold separately, these include MagConnect Modules, aXtion Rugged Cases, and Unite Holders, designed for universal compatibility.
The diagram shows how the MagConnect Adapter (A) connects to the Heavy Duty Arm (B), which then attaches to the Seat Bolt Mount Base (C). The base is designed to be secured to a vehicle's seat bolt using the provided brackets and hardware. Component D represents compatible accessories.
Mount Installation
This section details four mounting options for securing the mount to a vehicle bolt. For optimal support, the arm at the base should ideally run perpendicular to the vehicle floor. The kit includes three bolt brackets and a base to achieve this. Select the best option based on your vehicle's hardware to ensure maximum stability.
Mounting Options:
-
1. Flat Horizontal Surface
Steps:
- Remove the vehicle bolt. [remove-bolt]
- Secure the base (i) to the vehicle using the appropriate bolt (e.g., screw (f) and nuts (g) with bracket (j) or other provided brackets). Ensure the connection is tight. [secure-bracket-tight]
- Attach the mount to the base by placing it over the base and securing it by turning the latch. [attach-mount-base]
Diagrams illustrate the process of removing the bolt, attaching the base with brackets and hardware, and then securing the mount to the base.
-
2. Flat Horizontal Surface (Obstructed Bolt)
Steps:
- Remove the vehicle bolt. [remove-bolt]
- Secure the base and support bracket to the 90° bracket. Ensure the connection is tight. [secure-bracket-tight]
- Attach the mount to the base by replacing the bolt while securing the bracket. Place the mount over the base and secure by turning the latch. [attach-mount-base]
Diagrams show the use of a 90° bracket in conjunction with the base and mount.
-
3. Flat Vertical Surface
Steps:
- Remove the vehicle bolt. [remove-bolt]
- Secure the base and support bracket to the 90° bracket. Ensure the connection is tight. [secure-bracket-tight]
- Attach the mount to the base by replacing the bolt while securing the bracket. Place the mount over the base and secure by turning the latch. [attach-mount-base]
Diagrams illustrate the attachment to a vertical surface using a 90° bracket.
-
4. Angled Surface
Steps:
- Remove the vehicle bolt. [remove-bolt]
- Secure the base and support bracket to the 45° bracket. Ensure the connection is tight. [secure-bracket-tight]
- Attach the mount to the base by replacing the bolt while securing the bracket. Place the mount over the base and secure by turning the latch. [attach-mount-base]
Diagrams show the attachment to an angled surface using a 45° bracket.
Included Hardware Reference:
- (a) 90° raiser bracket x1
- (b) 90° bracket x1
- (c) 180° bracket x1
- (d) support bracket x1
- (e) washer x1
- (f) screw x1
- (g) screw nuts x2
- (h) support foot cap x1
- (i) base x1
- (j) support foot x1
Tray Installation
This section covers the installation and use of the accessory tray.
Tray Installation Steps:
- Attach rubber pads to the bracket tips.
- Attach brackets to the tray (3x 60° brackets, 2x 90° brackets).
- Secure the device (e.g., a 7-13" Tablet) to the tray.
Diagrams show attaching rubber pads, attaching brackets to the tray, and securing a device.
Using the Tray for a Keyboard Case
Steps:
- Step 1: Place the tray in a flat position and fully expand its brackets.
- Step 2: Place a keyboard on top of the tray. Secure the brackets tightly to the edge of the keyboard to ensure a firm fit.
Diagrams illustrate placing the tray flat, expanding brackets, and securing a keyboard.
Extend & Rotate Arms
To adjust the arm positioning:
- Release the latch by pulling it away from the mount arm. [pull-latch]
- Once released, pull the middle joint upward until the desired position is reached.
- Secure the position by turning the latch to the locking position. [lock-latch]
- To rotate the arms and tray, turn the knobs ⚙️ to adjust to your liking. Tighten the knobs to secure. [tighten-knob]
Diagrams show releasing the latch, adjusting the arm, and securing it with the knob.
Important Information and Disclaimer
Disclaimer for Joy Factory Tablet Mounts:
Congratulations on your purchase of a Tablet Mount from The Joy Factory Inc. Please read all provided literature before installation or use to ensure compatibility with your tablet. If unsure, check the Joy Factory website or contact customer service.
Improper use can damage your tablet. Using the mount with other devices may create insecure mounting, place unanticipated loads, or weaken the mount. Using the mount with devices other than those for which it is designed will void all Joy Factory warranties. The Joy Factory disclaims liability for mounts not used as designed or for unintended purposes.
Only use your tablet mount for its intended purpose, when and where it is safe and permitted by law. Joy Factory mounts are not intended to protect electronics from damage, loss, or theft. All liability for such damages is disclaimed.
Installation must follow Joy Factory instructions. Liability for damage to mounts or attached items is disclaimed.
For Mounts Used in Motor Vehicles:
Never use the mounting device or electronics while operating the vehicle or while it is in motion. The Joy Factory disclaims liability and warranties for use not allowed by law, or use that interferes with, distracts, or is dangerous to the driver. The Joy Factory will not pay for damages, citations, tickets, or fines due to improper mounting or use.
Passengers should only use devices when safe and when it does not distract the driver. For windshield mounts, confirm legality and any limitations on use that obstruct driver vision.
For seat bolt mounts, professional installation is encouraged. Installation must follow Joy Factory and vehicle manufacturer instructions. Improper installation causing damage to the vehicle, mount, or electronic device is not the responsibility of The Joy Factory.
Warranty and Support:
The Joy Factory will replace your Tablet mount if it has manufacturing defects, free of charge, for one year from the date of purchase. To report a defect, cease use immediately and contact The Joy Factory by email at support@thejoyfactory.com or by telephone at (949) 216-8888, Monday through Friday, 9:00 a.m. to 5:00 p.m., Pacific Time.
The Joy Factory is not responsible for replacing or paying for replacement of tablets or other items damaged from use with a mount, whether the mount has defects or not. If a mount is damaged for any reason, stop using it immediately. The Joy Factory disclaims all liability and warranties for damaged mounts and will not replace them, nor pay for damaged accessories.
The Joy Factory disclaims all liability for lost or stolen mounts and associated devices.
Do not use the mount with any other tablet case, as this may create insecure mounting or weaken the mount, voiding warranties. Any alteration to the mount will void all warranties. The Joy Factory disclaims liability for damages from altered mounts.
For full warranty information, visit thejoyfactory.com/warranty-information.
