Web hosting, domain name registration and web services by 1&1 Internet
경우시스테크
User Manual for KYUNGWOO models including: SMK-HXV-30, SMKHXV30, ZE8-SMK-HXV-30, ZE8SMKHXV30, SMK-HXV-30 Chipkey Tag, Chipkey Tag
KYUNGWOO SYSTECH INC. SMK-HXV-30 CHIP KEY TAG ZE8-SMK-HXV-30 ZE8SMKHXV30 smk hxv 30
File Info : application/pdf, 8 Pages, 543.93KB
DocumentDocumentChipkey Tag User' Manual 2020. 02. 11 Prepared() Park Jeguk Reviewed() Approved() www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. Revision History Rev. 1.0 2020.02.11 First Release SMART KEY TAG USER'MANUAL Rev (1.0) Park Jeguk www.kyung woo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 2 / 8 Revision History 1. Synopsis 2. Product Image 3. Block Diagram 4. Specification Contents SMART KEY TAG USER'MANUAL Rev (1.0) www.kyung woo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 3 / 8 SMART KEY TAG USER'MANUAL Rev (1.0) 1. Synopsis This document is specifically-written manual for receiver and transmitter (Chipkey Tag) of wireless communication, which is to confirm user identifications under engine-start limiting function in heavy equipments. Chipkey Tag is defined as following: it receives signals with RFID 125 KHz and wakes up. After then, it transmits password-secured information to Chipkey/Flipkey Reader by using 433MHz wireless signals. WARNNIG Exchanging batteries in incorrect way, It may cause explosion Discard used batteries according to manufacturer's instructions 2. Product Image 1) External Appearance www.kyung woo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 4 / 8 2) Dimension SMART KEY TAG USER'MANUAL Rev (1.0) 3) Certification LABEL location www.kyung woo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 5 / 8 4) Block Diagram SMART KEY TAG USER'MANUAL Rev (1.0) 4. Specification 4.1. Operating Specification -. Must wake up the remote control by providing electricity with RFID 125 KHz. -. Must be operating with CR2032 battery. -. Must be able to transfer password-secured signals. -. Must be able to use Single channels with band of 433MHz. 4.2. Power Specification -. 3 V d.c. (CR 2032 Lithium Battery) -. Notice : Inserting opposite polarity of battery may cause explosion or damage to product (Please match battery polarity with battery holder) 4.3. General Specification -. Storage Temperature: -20 ~ 70 -. Operating Temperature: -10 ~ 60 -. Water-Proof Specification: IP54 (Living Water-Proof) -. Material of Device : PC (Material: 3025N1, Flame Class : V0, Manufacturer : SAMYANG) -. PCB Material : object/part No. manufacturer/ trademark SMK TAG B/D PCB JM ELECTRONICS CO LTD Layer /Thickness 2Layer /0.8T Flame Class V-0 UL No. E117655 mark(s) of conformity1) www.kyung woo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 6 / 8 SMART KEY TAG USER'MANUAL Rev (1.0) 4.4 RF Specification Wireless Data Communication System Magnetic Induction System Item Frequency RF Power Modulation Method Tested Temperature Frequency RF Power Modulation Method Specification 433MHz (Single Channel) Under 1 mW GFSK -10 ~ +60 125KHz (Single Channel) Receive Only ASK 4.5. Product label Explanation of graphic symbols used Symbol Description Korea Certification Marking Communaute Europeenne Marking Electrical waste and electronics equipment Federal Communication Commision Marking Direct current www.kyung woo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 7 / 8 SMART KEY TAG USER'MANUAL Rev (1.0) 5. Postal address: Kyungwoo Systech, Inc. Office: +82-2-985-8085 #401, Daeryung Post Tower 5, 68, Digital-ro 9, Geumcheon-gu, Seoul, South Korea E-mail: Webmaster@kyungwoo.com This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RED Compliance Statement This product is CE marked according to the provision of the RED (2014/53/EU). Hereby Kyungwoo Systech, Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU www.kyung woo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 8 / 8