GrowDaily Electric Drum Set Installation Guide

Steps of Installing a Drum Stand

This section outlines the components and assembly process for the drum stand.

Components:

• 1: Drum stand pole section
• 2: Collapsed drum stand base
• 3: Mounting bracket/clamp
• 4: Drum stand pole section
• 5: Wooden drum pad support tray
• 6: Screw for attaching tray
• 7: Screw for attaching drum pads
• 8: Electronic drum pad unit (with module)

Assembly Process:

1. Attach the drum stand pole section (1) to the collapsed drum stand base (2).
2. Connect the second drum stand pole section (4) to the assembled stand.
3. Secure the mounting bracket/clamp (3) onto the drum stand pole (4).
4. Attach the wooden drum pad support tray (5) to the mounting bracket (3) using screw (6).
5. Mount the electronic drum pad unit (8) onto the wooden tray (5) using screw (7).

The final assembly results in a complete electronic drum set mounted on a stable stand, including foot pedals.

Installation Video

For a visual guide, please watch the following installation video:

Link: https://youtu.be/QU_E_MWWCOM

You can also scan the provided QR code (not displayed here) to access the video.