DJI Mini 3 Quick Start Guide

Step 1: Download the DJI Fly App

To begin, download the DJI Fly app on your smartphone or tablet. This app is essential for controlling the drone and accessing its features.

Scan the QR code or visit: https://s.dji.com/guide43

The app provides access to tutorials (▶️), user guides (?), and flight controls.

Step 2: Prepare the Drone

Unfold the drone arms. The front arms unfold outwards, followed by the rear arms. Ensure they click securely into place.

[Diagram description: A line drawing of the DJI Mini 3 drone. Arrows indicate the sequence of unfolding the arms: first the front arms outwards, then the rear arms outwards.]

Step 3: Charge the Intelligent Flight Battery

Before first use, charge the Intelligent Flight Battery fully. A USB-C PD charger with a power output of 30W or higher is recommended for optimal charging speed.

[Diagram description: A line drawing showing the Intelligent Flight Battery, a USB-C charger, and a USB-C cable. A label indicates the required power input: "≥30W".]

Step 4: Attach Propellers

Attach the propellers to the drone motors. Each propeller is marked with a symbol (either a line or no symbol) that corresponds to a marking on the motor. Match the propeller to the correct motor and secure it by pressing down and twisting.

[Diagram description: A sequence of images showing how to attach propellers to the drone arms. Arrows indicate the correct placement and the twisting motion to secure them. Propellers are shown with distinct markings.]

Step 5: Power On/Off and Check Battery Level

To check battery level: Press the power button once.

To power on/off: Press the power button once, then press and hold for 2 seconds.

[Diagram description: Close-up illustrations of the power button on the drone and the remote controller. Finger icons indicate the action of pressing once for status and pressing and holding for power on/off.]

Step 6: Connect to DJI Fly App

Power on the drone and the remote controller. Connect your mobile device (smartphone or tablet) to the remote controller using the appropriate cable.

Launch the DJI Fly app and follow the on-screen instructions to pair the drone and controller. The app will guide you through initial setup and flight modes. "Mode 2" is a common control mode where the left stick controls altitude and yaw, and the right stick controls forward/backward and left/right movement.

Explore features within the app such as "Altitude Zone (120m)" and "Fly Spots" for enhanced flight planning and safety.

[Diagram description: A sequence of illustrations showing the drone, remote controller, and mobile device being connected. This is followed by a depiction of the DJI Fly app interface on a mobile screen, highlighting navigation options like Album, Skypixel, Profile, and Connection Guide.]

Product Overview

The DJI Mini 3 package typically includes the following key components:

• DJI Mini 3 Drone
• Intelligent Flight Battery (Model: BWX162-2453-7.38)
• microSD Card (optional accessory, not always included)

The drone is designed to be lightweight, weighing less than 249 grams (< 249 g).

[Diagram description: A visual representation showing the main components: the folded DJI Mini 3 drone, the Intelligent Flight Battery, and a microSD card. A label indicates the total weight is less than 249g.]

Resources

For more detailed information, software downloads, and firmware updates, please visit the official DJI website:

https://www.dji.com/mini-3/downloads

For technical support and assistance, you can contact DJI SUPPORT by scanning the provided QR code or use the WeChat QR code for additional support channels.