Manuals+

USER GUIDE & SERVICE MANUAL

Model: UHRE524-IS01A

Welcome to U-Line

Congratulations on your U-Line purchase! Your product comes from a company with decades of premium modular ice making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired innovations, paying close attention to even the smallest details. Applications include residential, outdoor, ADA height compliant, marine, and commercial. Product categories include Beverage Centers, Wine Refrigerators, Ice Machines, Refrigerators, Freezers, and Dispensers. Our advanced refrigeration systems, large and flexible capacities, and clean integrated look are what makes our products Built-In to Stand Out®. Since 2014, U-Line has been part of the Middleby family of brands. Products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products are available worldwide.

U-Line -- RIGHT PRODUCT. RIGHT PLACE. RIGHT TEMPERATURE.®

Product Information

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, and Product Warranty information are available digitally on u-line.com.

Property Damage / Injury Concerns

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following steps:

  1. U-Line Customer Care must be contacted immediately at +1.414.354.0300.
  2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

Contact Information

General Inquiries

U-Line Corporation
8900 N. 55th Street
Milwaukee, Wisconsin 53223 USA
Monday - Friday 8:00 am to 4:30 pm CST
T: +1.414.354.0300
Email: sales@u-line.com
u-line.com

Service & Parts Assistance

Monday - Friday 8:00 am to 4:30 pm CST
T: +1.414.354.0300
Service Email: onlineservice@u-line.com
Parts Email: onlineparts@u-line.com

Connect With Us

[Facebook Icon] [Pinterest Icon] [YouTube Icon] [Instagram Icon] [Blog Icon]

Designed, engineered and assembled in WI, USA

Integrated Panel Dimensions

Metric measurements rounded and optimized.

Integrated Panel

[NOTICE] Due to differences in surrounding cabinetry the panel may not perfectly align with door. The procedure below is designed to provide a finished integrated panel that seamlessly integrates with surrounding cabinetry.

Panel Preparation

A full integrated door panel completely covers the door frame and provides a built-in appearance.

[NOTICE] The door panel must not weigh more than 20 lbs (10 kg).

It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed.

  1. Cut the panels to the dimensions listed in the appropriate diagram below.
  2. Optional: Stain or finish panel to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
  3. Optional: Install handles and hardware.

[NOTICE] When applying an integrated panel to a unit, ensure that both sides are finished in order to prevent warping. In some overlay panel/frame installations, the panel may be visible through the glass while the door is open.

Diagram: Integrated Panel Dimensions

Diagram showing an integrated panel with dimensions. The panel is rectangular. The width is 23-1/2 inches (595 mm). The height is 30 inches (762 mm). A note indicates the back surface must have an ample flat surface to mount the overlay panel flat and without interference. The top edge has a 3/4 inch (20 mm) thickness.

Handleless Integrated Door Panel

The following procedure is designed to provide a finished, handleless solid panel for a 24" (600 mm) door that seamlessly integrates with its surrounding cabinetry.

NOTE: Many cabinet manufacturers provide a ready solution for a handleless, integrated design that can be easily applied to your model. Consult your cabinet manufacturer for applicable design and installation details. The cabinet manufacturer's solution to this design and integration detail will often result in an integrated panel solution wherein the size of the panel may result in a height dimension taller than what we specify. This can be achieved provided the additional height is positioned above the appliance door.

[NOTICE] The integrated panel aligns with the surrounding cabinetry and, due to differences in cabinetry, may not align perfectly with the door.

The appliance will need up to 34-1/2" (876 mm) to the underside of the counter to leave room for leveling adjustments.

A single prepared overlay with insert must not weigh more than 20 lbs (10 kg).

Integrated Panel Preparation

  1. Cut the main panel to the appropriate dimensions below. For details, see the drawings on the next page.
Main panel widthMain panel height
23-1/2" (595 mm)28-13/16" (732 mm)
  1. Create the top design for the handleless feature and the 1/8" (3 mm) notch for the insert(s) indicated on the Top Detail drawing.
  2. Prepare the insert(s) that will back up the handleless design. Wooden Insert - Cut 1/8" (3 mm) thick wooden insert(s) to the dimensions below.
Wooden insert widthWooden insert height
23-1/2" (595 mm)3-1/2" (89 mm)
  1. Optional: Stain or finish panel and wooden insert to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.

[NOTICE] If finishing panel or wooden insert, all sides must be finished to prevent warping.

  1. Attach the insert to the panel. Wood glue or equivalent adhesive should be used to attach insert to panel.

Diagram: Top Detail
Detailed diagram of the top edge of the handleless integrated panel. Shows the 'Top Design' with a thickness of 1/8" (3 mm) and a 1/4" (6 mm) groove. The 'Insert Notch' has a depth of 1/8" (3 mm) and a width of 2-3/8" (60 mm). A radius of R 5/8" (R16 mm) is shown. A reference dimension of 7/8" (22 mm) is provided.

Diagram: Attach Wooden Insert
Diagram showing how to attach the wooden insert to the main panel.

Handleless Integrated Panel Dimensions

Diagram: Main Panel Dimensions

Diagram showing the dimensions of the handleless integrated panel. The overall width is 23-1/2" (595 mm). The height is 28-13/16" (732 mm). It shows cutouts or margins of 2-3/4" (70 mm) from the top and sides. A 3/4" (20 mm) thickness is indicated.

Diagram: Wooden Insert Dimensions

Diagram showing the dimensions of the wooden insert. The width is 23-1/2" (595 mm) and the height is 3-1/2" (89 mm). The thickness is 1/8" (3 mm).

Extended Integrated Panel

[NOTICE] Due to differences in surrounding cabinetry the panel may not perfectly align with door. The procedure below is designed to provide a finished panel that seamlessly integrates with surrounding cabinetry.

Panel Preparation

An extended integrated panel can be used to maintain alignment with an adjacent extended cabinet height or a reduced toe-kick/grille application.

  1. Cut the panels to the dimensions listed in the appropriate diagram on the next page.
  2. Optional: Stain or finish panel to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
  3. Optional: Install handles and hardware.

[NOTICE] The door panel must not weigh more than 20 lbs (10 kg).

It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardware is installed.

Appliance will need up to 34-1/2" (876 mm) to the underside of the counter to leave room for leveling adjustments.

When applying an integrated panel to a unit, ensure that both sides are finished in order to prevent warping. In some installations, the panel may be visible through the glass while the door is open.

Diagram: Front View - Integrated Panel/Frame

Diagram showing the front view of an integrated panel/frame installation. It depicts a cabinet, the U-Line unit, and the integrated panel. Dimensions shown are: > 3-5/16" (> 89 mm) from the top of the cabinet to the unit, and 3-5/16" (89 mm) to 4-5/16" (114 mm) from the floor to the bottom of the unit/panel.

Diagram: Side View - Integrated Panel

Diagram showing the side view of an integrated panel installation. It shows the U-Line unit and the integrated panel. Dimensions shown are: 3-5/16" (89 mm) to 4-5/16" (114 mm) from the floor to the bottom of the unit/panel.

Diagram: Front View - Extended Integrated Panel/Frame

Diagram showing the front view of an extended integrated panel/frame installation. It depicts a cabinet, the U-Line unit, and the extended integrated panel. A note indicates the panel can extend beyond the door frame. Dimensions shown are: 3-5/16" (89 mm) to 1" (25 mm)** from the floor to the bottom of the unit/panel, with ** indicating a minimum of 1" (25 mm) from the floor for proper ventilation.

Diagram: Side View - Extended Integrated Panel

Diagram showing the side view of an extended integrated panel installation. It shows the U-Line unit and the extended integrated panel. Dimensions shown are: 3-5/16" (89 mm) to 1" (25 mm)** from the floor to the bottom of the unit/panel, with ** indicating a minimum of 1" (25 mm) from the floor for proper ventilation.

Extended Integrated Panel Dimensions

Diagram: Extended Integrated Panel Dimensions

Diagram showing the dimensions of the extended integrated panel. The width is 23-1/2" (595 mm). The height is specified as 32-7/8" to 33-7/8" (834 mm - 860 mm)*. A note indicates a minimum of 1" (25 mm) is required from the floor to the bottom of the extended integrated panel/frame for proper ventilation. The top edge has a 3/4" (20 mm) thickness. The back surface must have an ample flat surface for mounting.

Integrated Grille

If you would like to cover the grille with an integrated panel, purchase U-Line's adjustable grille accessories.

24" - Sales Accessory: ULAGRILLE24

Complete instructions, including dimensions of the integrated grille panel, are included with the accessory.

Integrated Panel Installation

  1. Fully open door.
  2. Starting at corner, pull gasket away from door.
  3. Continue to pull gasket free from gasket channel.
  4. Upon removal, lay gasket down on a flat surface.
  5. Align top of panel with top edge of door. Center panel on door.

[NOTICE] Due to differences in floor construction or surrounding cabinetry, the panel may not sit flush with the top of the door.

  1. Secure integrated panel to door using clamps. A robust tape may also be used. U-Line recommends the use of bar clamps to secure the panel to the door. If using tape, be certain the tape will not damage panel finish upon removal.

Diagram: Integrated Panel Installation - Clamps
Diagram showing the use of bar clamps to secure the integrated panel to the door/drawer wood panel. It illustrates the panel, wood panel, and bar clamps.

  1. Using a 7/64" (3 mm) drill bit, drill 6 pilot holes into the wood panel 1/2" (12 mm) deep using the holes in the door frame as a guide.

[NOTICE] It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardwood is installed.

  1. Locate 6 of the #6x 1-1/2" (38 mm) screws provided with your unit.
  2. Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws.
  3. Ensure the screws sit flush against the bottom of the channel.

Diagram: Integrated Panel Installation - Screws
Diagram showing the integrated panel attached to the door frame with screws. It illustrates the panel, the door frame, and the screw placement.

  1. Remove clamps from door.

[NOTICE] If panel requires additional adjustment after removing clamps, slightly loosen each screw and adjust panel as necessary. Tighten screws upon completion.

  1. Starting at the corners, re-install the gasket into the gasket channel in the frame. Make sure the gasket is fully seated.

Grille Installation

REMOVING AND INSTALLING GRILLE

[WARNING] Disconnect electric power to the unit before removing the grille. When using the unit, the grille must be installed.

[WARNING] DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged.

Removing the grille

  1. Disconnect power to the unit.
  2. Loosen the two screws (1).
  3. Remove grille (2) from unit.

Installing the grille

  1. Align cabinet and grille holes and secure, but do not over tighten grille screws (1).
  2. Reconnect power to the unit.

Diagram: Grille Components
Diagram showing the grille components. Two screws labeled (1) are indicated, and the grille itself is labeled (2).

Models: UHRE524 24 Inch Undercounter Refrigerator, UHRE524, 24 Inch Undercounter Refrigerator, Undercounter Refrigerator, Refrigerator

File Info : application/pdf, 10 Pages, 1.66MB

PDF preview unavailable. Download the PDF instead.

UHRE524IS01A-74624257.

References

FPDF 1.86

Related Documents

Preview U-Line U-2224RGLINT-00B User Guide & Service Manual
Comprehensive user guide and service manual for the U-Line U-2224RGLINT-00B refrigerator, covering installation, integrated panel dimensions, handleless frame setup, grille installation, and important safety information.
Preview U-Line 2000 Series 2224WC 24" Single Zone Wine Captain User Guide & Service Manual
Comprehensive user guide and service manual for the U-Line 2000 Series 2224WC 24" Single Zone Wine Captain, detailing installation procedures for integrated panels and grilles, along with product specifications and company information.
Preview U-LINE UHRE515 15" Refrigerator User Guide & Installation Manual
Comprehensive user and service manual for the U-LINE UHRE515 15" refrigerator, detailing integrated panel dimensions, installation, and grille setup. Learn how to customize your appliance with integrated panels for a seamless look.
Preview U-Line U-2224BEVINT-00B User Guide & Service Manual
User guide and service manual for the U-Line U-2224BEVINT-00B, covering installation, integrated panel dimensions, handleless integrated frame, extended integrated frame, and grille/plinth installation.
Preview U-Line U-2218BEVINT-60A User Guide & Service Manual
Comprehensive user guide and service manual for the U-Line U-2218BEVINT-60A beverage center, covering installation, integrated panel dimensions, grille installation, and product information.
Preview U-LINE 15" Nugget Ice Machine UHNB115/UHNP115 User Guide & Installation
Comprehensive user guide and installation manual for the U-LINE 15" Nugget Ice Machine (models UHNB115, UHNP115). Covers welcome information, product details, property damage concerns, contact information, and detailed instructions for integrated panel dimensions, handleless panel installation, extended panel installation, and grille installation.
Preview U-Line UHRE124 24" Refrigerator User Guide & Service Manual
Comprehensive user and service manual for the U-Line UHRE124 24" Refrigerator, detailing installation procedures for integrated panels and grilles, product information, and company contact details.
Preview U-Line UHRE524-SG81A User Guide & Service Manual
Comprehensive user guide and service manual for the U-Line UHRE524-SG81A beverage refrigerator. Covers installation, operation, maintenance, troubleshooting, and warranty information.