Cellularline CORE

Setup and Charging

The Cellularline CORE headsets come with a charging case. Place the earbuds into the case to charge them. The case itself can be charged using a USB-C cable. The charging indicator on the case shows the battery level, typically from 0% to 100%.

Charging Process:

• Place earbuds in the charging case.
• Connect the charging case to a power source via USB-C.
• The case display indicates charging status.

Pairing with Your Device

To pair your CORE headsets with a device (e.g., smartphone):

1. Take both earbuds out of the charging case. They will automatically enter pairing mode.
2. Open the Bluetooth settings on your smartphone.
3. Select "CORE" or a similar identifier from the list of available devices.
4. Once connected, the headsets are ready for use.

Controls and Functions

The CORE headsets feature touch controls on each earbud:

• X1 Touch (Single Tap): Play/Pause music, Answer/End call.
• X2 Touch (Double Tap): Next track (right earbud), Previous track (left earbud).
• X3 Touch (Triple Tap): Activate voice assistant (e.g., Siri, Google Assistant).
• Long Press (X2): Reject incoming call.

Resetting the Headsets

If you encounter issues, you can reset the CORE headsets:

1. Place both earbuds in the charging case.
2. Press and hold the touch control on both earbuds simultaneously for approximately 5-10 seconds until the indicator lights flash.
3. This will reset the headsets to factory settings. You may need to re-pair them with your device.

Technical Specifications

Compliance and Warranty Information

This section contains important information regarding product compliance, safety, and warranty terms. For detailed information, please refer to the original documentation.