Begode T4 User Manual

1. Package Contents and Product Diagram

The package for the Begode T4 electric unicycle includes:

• Begode T4 Electric Unicycle
• ON/OFF button and light switch
• Display
• Trolley handle (with charging ports located underneath)
• Front light
• Rear light
• Shock absorber
• Motor
• Pedal
• User manual (may be digital)
• Charger

The cardboard package is recyclable. Follow local guidelines for disposal. Recycling 1 ton of cardboard saves 17 trees.

Diagram Description: A visual representation of the Begode T4 electric unicycle, highlighting its main components such as the ON/OFF button, lights, display, trolley handle, shock absorber, motor, and pedals. The charger and packaging are also depicted.

Please check that all pictured items are included in your package. If any items are missing, contact your dealer.

2. Settings and Alarms

Powering On/Off: The electric unicycle is switched on and off using the ON/OFF button. When powering on, hold the wheel in the upright position.

WARNING: Tilting the unicycle forwards or backwards will cause the wheel to move accordingly, keeping the pedals horizontal. The wheel does not self-balance sideways.

Transport Mode

The unicycle is shipped in transport mode. To activate riding position:

1. Switch the unicycle ON using the ON/OFF button.
2. Hold down the engine stop button and press the ON/OFF button 5 times.
3. Switch the unicycle OFF and then ON again. The wheel is now in riding position.

The same procedure can be used to return the unicycle to transport mode.

Motor Cut-off

The motor cut-off button can be used to switch off the motor, for example, when lifting the wheel. The unicycle has an automatic wheel stop if tilted sideways by more than 35 degrees, facilitating parking on its side.

Smartphone App

The Begode app is available on the App Store and Google Play store, or at www.begode.com/app. Alternative apps include DarknessBot (iOS) and EUCWorld (Android).

Calibration

The neutral balance position of the pedals can be calibrated using the smartphone app. Hold the wheel pedal horizontally in a forward/reverse direction or at a desired inclination angle. New unicycles are pre-calibrated. NOTE: During calibration, the wheel must be vertical laterally; otherwise, unwanted pedal lift or lowering may occur during turns.

Software Updates

Begode regularly updates firmware. New software can be downloaded from the official after-sales service (voltride.com) or via the smartphone app. Keeping the software up-to-date is advisable.

Settings

The smartphone app allows adjustment of pedal "stiffness":

• Soft: Pedals tilt more, wheel reacts slower.
• Hard: Wheel reacts more sharply, suitable for steeper inclines.
• Medium: An intermediate position.

Other settings and adjustments include:

• Tire Pressure: Recommended pressure is 1.5 to 3.2 atm, adjustable based on rider weight, style, and terrain. Higher pressure improves rolling and range but makes the wheel stiffer.
• Shock Absorber: For models with shock absorbers, adjust travel, softness, and damping.
• Accessories: Lightweight Hexa pedals and mudguards are available as optional extras. Aftermarket support cushions, pedals, and body protectors can also be fitted.
• Tires: The unicycle can be fitted with tires suitable for asphalt or off-road riding. Tire replacement is recommended to be done by an official workshop due to complexity.
• Bluetooth Speakers: Can be connected to a smartphone.

Alarms

The unicycle provides audio alerts:

• Speed Alarms: 2 or 3 beeps, configurable in the app based on set speed.
• 80% Peak Power: 5 beeps.
• Speed Limiting (Battery Depletion): Wheel pushes up on the front of pedals, beeps vary with battery level:
  • Up to 14.4 km/h: 3 beeps per 2 seconds.
  • Up to 7.2 km/h: 2 beeps per 2 seconds.
  • Below 7.2 km/h: 2 beeps per second.

  Rider must not attempt to push pedals to horizontal position, as this can cause the wheel to lock up and result in a fall.

• Battery Low: 5 beeps, 1 beep per second. Avoid running the battery this low due to increased risk of falling and battery damage.
• Controller Overheated: 2 short beeps. Triggered at 80°C, causing the wheel to push up on the pedals. Rider must react immediately by reducing speed or aborting. Can also occur when braking on a descent with a fully charged battery.
• Overvoltage: 3 beeps per 2 seconds. A dangerous alarm warning the rider to slow down immediately to maintain balance.
• Sideways Wheel Spin: 5 beeps. If the wheel does not balance immediately after being lifted, switch it off and on again.

Alarms can be customized in the smartphone app.

3. How to Ride an Electric Unicycle

Learning to ride an electric unicycle typically takes between 5 minutes and a few days, depending on the individual. It is similar to learning to ride a bicycle.

Recommendation: Take basic training from the dealer or an experienced rider. A video guide is available by scanning the QR code: https://youtu.be/t6o8ZMlo5ko

Essential Safety Gear: ALWAYS wear a helmet, arm, knee, and elbow protectors, and ankle boots. A helmet with chin protection, protective clothing (motorcycle jacket/trousers) with back protection is highly recommended.

Direction Signals: Signal turns by hand. A straight right hand for a right turn, a straight left hand for a left turn. The brake light illuminates when braking; raising the right hand can also signal braking. Be aware of your surroundings, including what is behind you. A rear-view mirror or helmet-mounted mirror can be helpful.

Visibility: In dark or low-visibility conditions, ensure your unicycle's lights are working and you are clearly visible. Consider attaching additional front and rear lights to your helmet and wearing reflective clothing or a vest.

Practice Area: Before riding on public roads, practice in a safe, open area. Use an instructor if needed. Ensure you can react to unexpected situations by braking or swerving.

WARNING: Abrupt braking or braking in a bend can lead to loss of control and serious injury.

Always ensure your path is safe and ride at a speed appropriate to the conditions. Braking distances increase in wet conditions.

Traffic Laws: Understand and obey all applicable laws, rules, and restrictions for unicyclists. Do not ride on roads unless expressly permitted. If riding on pavements, do not obstruct pedestrians and adhere to speed limits.

Liability: The manufacturer, importer, and distributor are not liable for accidents or consequences arising from the use of the electric unicycle, including technical failures. The user is responsible for choosing a riding style that minimizes injury and damage in case of unexpected failure.

4. Charging

To charge the unicycle:

1. Turn the unicycle OFF.
2. Plug the charger into the wall outlet first.
3. Connect the charger to the unicycle's charging port.

Charging from 0% to 100% takes approximately 6 hours with the standard charger, or about half that time with two chargers.

It is recommended to charge the unicycle at room temperature.

WARNING: DO NOT charge the scooter if the charging port or power cord is wet. DO NOT charge or use the battery if it is damaged or shows signs of water contact. Always replace the charging port cover after charging.

Diagram Description: Shows the charging ports located under the trolley handle.

5. Serial Number

Each Begode electric unicycle has a unique serial number, essential for identification, support, and potential insurance. The serial number can be found on the rim of the unicycle's motor or viewed within the companion smartphone app.

Keep the serial number saved for future reference.

Diagram Description: Illustrates the potential location of the serial number on the unicycle's motor rim.

6. Maintenance

Regularly check tire condition and pressure. Recommended pressure is 1.5-3.2 bar, adjustable based on rider weight, style, and tire type. Riding with low pressure can cause punctures or rim damage. DO NOT ride if the tire is damaged or does not hold air.

Ensure the unicycle's shell and components remain tightly secured, especially after impacts. Check for cracks in the casing where dust and moisture could cause damage. If found, the wheel requires immediate servicing and repair.

Electric unicycles require less maintenance than electric scooters as they lack components like handlebars or folding mechanisms. However, sensitive areas still need regular inspection.

Warranty Maintenance Intervals:

• 1) 300 km after purchase.
• 2) Every 1000 km or at least once a year for regular maintenance.

Maintenance is performed by the official partner, Voltride Service (voltride.com).

Cleaning

Use a damp, soft cloth to clean the unicycle. Use a brush for stubborn dirt. DO NOT use alcohol, solvents, or a pressure washer. DO NOT immerse the unicycle in water, as it is not waterproof and water damage voids the warranty.

Storage

Switch off the unicycle and disconnect the charger. Store with the battery charged to approximately 50-60%. Check battery level every two months and recharge if necessary. Store in a dry room at 15-25°C.

WARNING: Like any mechanical component, electric unicycles are subject to stress and wear. Components age differently. If a component's expected service life is exceeded, it may fail unexpectedly, causing injury. Cracks, scratches, and discoloration indicate high stress and potential need for replacement. Regular maintenance checks for these defects, and users should also monitor for them.

7. Specifications

*Depends on the rider's weight, riding style, speed, terrain, temperature and wind.

8. Warnings

WARNING: Failure to follow these instructions might lead to serious injury and/or void the warranty.

• DO NOT ride the electric unicycle in the rain or through puddles. Water damage is not covered under warranty and will void the warranty. It is forbidden to wash the electric unicycle with water or other liquids.
• DO NOT ride the electric unicycle if it has been damaged in any way.
• DO NOT ride the electric unicycle on stairs or over obstacles.
• DO NOT store the unicycle in wet conditions or at temperatures below 15°C.
• DO NOT modify the electric unicycle or use accessories not approved by the manufacturer.
• DO NOT rest your feet on anything other than the pedals when riding.
• DO NOT exceed the carrying capacity of the electric unicycle.
• DO NOT use a mobile phone when riding a unicycle.
• DO NOT touch the motor after riding; it may get hot.
• DO NOT ride the electric unicycle with passengers. It is designed for one person.
• DO NOT ride if you are pregnant, have balance problems, or other contraindications.
• DO NOT ride under the influence of alcohol, drugs, or potent medications.
• DO NOT attach objects to the electric unicycle that may impede steering or balance. The device is not designed for transporting objects.
• DO NOT ignore warnings and malfunction messages on the screen, app, or audio alerts. Stop driving and contact a service center. Riding an improperly serviced unicycle may result in an accident, failure, and void the warranty.
• This equipment is not intended for acrobatic or commercial/rental use.
• Always obey traffic laws and local requirements.

Be familiar with and take into account the overload and other protection functions and warnings programmed into the bike's software:

• Speed and acceleration limit according to rider weight, battery capacity, and charge.
• Automatic switch-off if the unicycle's side inclination exceeds 35 degrees.
• Automatic switch-off if the wheel rotates in the air for more than 2 seconds.
• Power short circuit protection.
• Battery over-voltage or undervoltage protection.

WARNING: DO NOT rely solely on these protection measures; you are primarily responsible for your own safety. When the battery charge drops to 60%, avoid sudden accelerations and riding at maximum speed. Performance and safety are directly related to battery charge level.

9. Contact

Manufacturer: Dong Guan BEGODE Intelligent Technology Co., Ltd

Distributor: Fortunati Distribution OÜ
Telliskivi 57D, 10412 Tallinn
Tel: +372 56 808 138
www.fortunati.eu

Warranty and official service support is provided by Voltride Service:

Service Tel: +372 600 40 99 valik #2
Service e-mail: service@voltride.com
www.voltride.com