SHURE SE215 Pro Sound Isolating Earphones Instruction Manual

Instruction Manual for SHURE models including: 183SE215GN, SE215 Pro, SE215 Pro Sound Isolating Earphones, Sound Isolating Earphones, Isolating Earphones, Earphones

183SE215GN

183SE215GN, Shure SE215 Sound Isolation Earphones Green, WWW.CRUTCHFIELD.COM

HNEWBERRY

Shure SE215 Pro owner's manual

Shure SE215 Pro (Limited Edition Green) Sound Isolating™ wired earphones at Crutchfield

File Info : application/pdf, 29 Pages, 1.39MB

183SE215GN

Earphone Resource Center
Sound IsolatingTM Earphones
Shure web site for all earphone related information. Version: 6.2 (2022-K)

Shure Incorporated

Table of Contents

Earphone Resource Center Sound IsolatingTM Ear

phones

Sound IsolatingTM Earphones

Detachable Cable

Using Earphones

Choosing a Sleeve

Inserting the Earphones

Changing Sleeves

Removing the Earphones

Maintenance and Cleaning

Cleaning the Earphone Nozzle

Shure Bluetooth® Earphones

Bluetooth Pairing

Pairing Multiple Bluetooth Devices

Pairing Bluetooth Device to a PC

Bluetooth Accessory Quick Start Guides

Charging the Earphones

BT1 FAQ

Remote + Mic, Telephony, Voice Command and In-App

use

Battery, Durability, Range and Charging

Use with SE Earphones

BT2 FAQ

Remote + Mic, Telephony, Voice Command and In-App

use

Battery, Durability, Range and Charging

Use with SE Earphones

Accessories

Accessory Cables for Mobile Devices Quick Start Guides 1 3

In North America:

Specifications

Bluetooth Specifications

Battery Specifications

Headphone Amplifier Specifications

SAFETY PRECAUTIONS

WARNING FOR ALL EARPHONES!

SAFETY PRECAUTIONS

WARNING

CAUTION

IMPORTANT SAFETY INSTRUCTIONS

For Products That Use Bluetooth

Information to the user

Certifications

LIMITED WARRANTY

FOR ORIGINAL PURCHASES IN AUSTRALIA ONLY 23

Service and Repair Information

Service Centers

2/24

Shure Incorporated
Earphone Resource Center Sound IsolatingTM Earphones
Sound IsolatingTM Earphones
Shure Sound IsolatingTM Earphones, built with balanced armature speakers, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and in terchangeable Sound Isolating sleeves for a comfortable and personalized fit. For more information on how to wear Shure Earphones, view the How to Properly Fit and Wear Shure Earphones video tutori al. For more information on how to wear Shure Earphones, view the How to Change Shure Earphone Sleeves video tutorial. For more information on how to wear Shure Earphones, view the How to Clean Shure Earphones video tutorial.
Detachable Cable
You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone and connector.
· Do not use pliers or other tools. · Grasp the connector and the earphone as close as possible to where they join. · Pull straight apart--do not twist. Cable is a snap fit, not threaded.
Note: If you pull at an angle, the connector will not detach.
· Do not pull on the cable or put any pressure on the earphone nozzle. · Listen for a click when connecting. · When reattaching the cable, match the "L" and "R" markings. For clear cables and earphones, match the color dots
(Red=Right, Blue=Left).
3/24

Shure Incorporated
Using Earphones
Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove.
Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber. Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands. Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.
Inserting the Earphones
Carefully insert the earphone into the ear like an earplug, so that a tight seal is formed. Important: If there is a lack of low frequency response (bass), the earphone sleeve may not be forming a proper seal. Gently push the earphone deeper into the ear canal or try using a a different sleeve. Warning: Do not push the earphone sleeve beyond the ear canal opening.
The fit of the earphone can greatly affect sound quality.
Wearing the Earphones
The following are some suggested ways of wearing the earphones.
4/24

Shure Incorporated Wear the cable over the ear and secure it behind the head to help keep the earphones in place during physical activity. Tighten the cable and take up slack by raising the cable cinch.
Changing Sleeves
· Twist and pull to remove the sleeve from the nozzle. · Slide on a new sleeve so that it completely covers the barb and the nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves).
For more information on how to wear Shure Earphones, view the How to Change Shure Earphone Sleeves video tutorial.
Removing the Earphones
Grasp the body of earphone and gently twist to remove.
Note: Do not pull on cable to remove earphone.
For more information on how to wear Shure Earphones, view the How to Properly Fit and Wear Shure Earphones video tutori al.
5/24

Shure Incorporated
Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety. · Keep the earphones and sleeves as clean and dry as possible. · To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing. · Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants. · Do not expose earphones to extreme temperatures. · Replace sleeves if they do not fit properly. · Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure.
Cleaning the Earphone Nozzle
If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire loop end of cleaning tool. If no obstruction is found or if sound quality does not improve, replace the sleeve with a new sleeve.
Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter. Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury. The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them using a dry cotton swab.
For more information on how to wear Shure Earphones, view the How to Clean Shure Earphones video tutorial.
Shure Bluetooth® Earphones
Shure Bluetooth earphones are designed for continued functionality with Bluetooth capable devices. They feature a three but ton controls with in-line microphone for phone calls and voice applications.
6/24

Bluetooth Pairing

Shure Incorporated

1. Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red. 2. From the bluetooth settings of your audio source, select your Shure bluetooth device. 3. LED turns blue when successfully paired.
Pairing Multiple Bluetooth Devices
1. Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red. 2. From your audio source, select "Shure BT1." 3. LED turns blue when successfully paired. To pair second device: 1. Press and hold the center button on the second device until the LED flashes blue and red. 2. Select the second device on your audio source. 3. LED turns blue on second device when successfully paired.
Pairing Bluetooth Device to a PC
If you are having difficulty pairing your BT1 earphones to your PC, you may need to update your drivers. Here are two ways to update your computer driver via the Intel® website.
1. Manually: This requires that you locate your wireless adapter and then download the specific driver update for that wireless adapter. Information and drivers are located here: Manual Update.
2. Intel Update Utility: This requires you to download the update app, run the app and allow it to scan your computer for required driver updates. Download the app here: Intel Update Utility.
Note: The Intel Update Utility is recommended because it requires fewer steps. Refer to your PC user manual for more information.
Bluetooth Accessory Quick Start Guides
· BT1 quick start · BT2 quick start
7/24

Charging the Earphones

Shure Incorporated

Red LED indicates low battery. 1. Connect earphones to charging device using supplied cable. 2. LED is red while charging. 3. When earphones are charged, LED turns off.
Warning: Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
BT1 FAQ
For more information, or to view other Frequently Asked Questions, visit the Shure FAQ.
Remote + Mic, Telephony, Voice Command and In-App use
Q.) How do I pair my wireless Sound IsolatingTM earphones with my device? A.) With the BT1 product OFF, activate pairing mode by holding center button for 7 seconds on the remote. Navi gate to Bluetooth settings in the source device settings, and the device SHUREBT1 should appear in available de vices. Select BT1, and your device should be paired.
Q.) How do I set up multi-point pairing? How do I change active devices? A.) Multipoint pairing, a feature of Bluetooth 4, is set up automatically--pair a second device (power cycle by hold ing the power button down until the earphones turn off, and press again for 7 seconds to enter pairing mode). The playback between devices should be triggered by new activity (incoming call, new playback). If devices do not au tomatically recognize the BT1 as an output device, manually disconnect and re-select the BT1 in device settings.
Q.) Are my wireless Sound Isolating earphones designed for calls? A.) The Bluetooth 4 protocol has both headset and stereo audio playback features built-in. The two-way audio and remote functions are included in that protocol, and the inline microphone located on the right side cable is provid ed for calls and voice commands.
Q.) Does the cable work with my iPhone/iPod/iPad/Android device? A.) Any device supporting Bluetooth 4 stereo audio playback and telephony protocols is compatible, including Ap ple and many Android devices. We recommend downloading and installing the latest compatible operating system to ensure all drivers are up-to-date.
8/24

Shure Incorporated
Q.) Do my wireless Sound Isolating earphones work with Siri® or Google®? A.) Yes, hold the center button on the remote for 3 seconds to activate Siri, Google, or any other voice assistant service. (Source device dependent.)
Q.) How do I use voice commands? A.) Hold down the multi-function center button (power/answer/end call) for 3 seconds to prompt voice command software. (Source device dependent)
Q.) What device controls do the cable and earphones support? How do I use them? A.) The center button may be used for play, pause of media, and answering and ending of calls. Volume up (+) but ton can be depressed for 3 seconds to skip forward to the next song. The volume down (-) button can similarly be depressed for 3 seconds to skip to the beginning of the song (or to a previous song within approximately 5 sec onds of the beginning of a track). The center button will power down the earphones when held for 5 seconds. Holding down the power button for three seconds also powers the device back on.
Q.) Will my wireless Sound Isolating earphones work with fitness apps? A.) Yes, most apps that have audio prompts will work, just like wired earphones.
Note: These earphones will not provide heart rate or other biometrics.
Battery, Durability, Range and Charging
Q.) Are my wireless Sound Isolating earphones IPX-rated for water resistance? Are they suited to exercise? A.) The BT1 is not IPX-rated for water resistance. However, the SE112 and SE215 comprise two of the most durable earphones available on the market today. The cable, transmitter/receiver, and remote + mic pod are subject to the same stringent battery of tests for moisture resistance that all of our earphones undergo. Also, when used in con junction with the clothing clip, the snug, comfortable fit of the Sound Isolating design and eartips, and wireform ca ble (SE215 and RMCE-BT1 only) provides long-wearing comfort, providing a secure seal with the ear canal during even the most intense workouts. As such, these (and any earphones paired with the RMCE-BT1) are completely suitable for exercise. However, we cannot recommend use during any activities where awareness of surroundings are necessary (such as cycling or driving), and where prohibited by law.
Q.) Why am I experiencing dropouts with my Bluetooth Sound Isolating earphones? A.) While the Bluetooth 4 protocol defines standard range as up to 10 m (30 ft), the ideal distance between devices is significantly smaller, especially when outdoors where reflections are minimal. Similarly, the range can be much further in enclosed spaces, where a lot of reflections of the signal are permitted. Absorption of signal by skin or garments may impact connectivity (especially keeping the music device in a pocket with keys, credit cards, which may act as an unwanted antenna for the phone), and a line-of-sight signal should be established to troubleshoot any connectivity or dropout issues.
9/24

Shure Incorporated
Q.) How long will the battery on my wireless Sound Isolating earphones last between charges? A.) When new, the BT1 battery will play back music for up to 8 hours, depending on volume and type of music lis tened to.
Q.) How do I charge my earphones? How do I know when the battery is charged? A.) The supplied USB cable can be plugged into any standard 5V USB connection, including those supplied with devices, and on computers or laptops. For safety, do not connect to charger producing higher than 1 A of current. The LED light will be solid red when charging. When fully charged, the LED will turn off.
Q.) How long does it take to charge the battery? A.) The battery charges fully in about 2 hours, depending on power source used. A "quick charge" will get up to two hours of playback on just fifteen minutes of charging time.
Q.) Can I listen while my earphones are charging? A.) Yes. You can use the product while it is charging.
Use with SE Earphones
Q.) Why would I pick Bluetooth Sound Isolating earphones over wired Sound Isolating earphones? A.) Wireless Sound Isolating earphones provide the great sound of wired SE earphones with the freedom of motion that separating your playback device from your earphones offers. This is ideal for high-impact exercise (running, spin classes) where movement of the body may cause entanglement and result in an uncomfortable pull on the ears. Wireless Sound Isolating earphones are also ideal for travel and commuting, where hands-free media control and telephony are key features.
Note:
Some airlines permit Bluetooth use in-flight. Check with your airline provider before travelling with the SE112-BT1, SE215-BT1 or RMCE-BT1. The wireless Sound Isolating earphones may be ideal for iPhone 7 and other devices that do not have a standard headphone output as an alternative to the RMCE-LTG (for Lighting-equipped iOS devices, only). The MMCX connectors standard on most SE earphones, like the SE215 and SE846, mean you don't have to choose between wired and wireless--simply add an RMCE Remote + Mic accessory cable, RMCELTG (for iPhone 7 and iPhone 7 Plus), or the EAC64 replacement detachable cable (if the telephony features of the Remote + Mic cable isn't required).
Q.) What models of SE earphones are the RMCE-BT1 for? A.) All models of SE earphones with MMCX connectors, including SE215, SE315, SE425, SE535 and SE846 Sound Isolating earphones are compatible with the RMCE-BT1.
10/24

Q.) Do the BT1 cable and earphones support Bluetooth aptX codec? A.) BT1 products do not support aptX codecs.

Shure Incorporated

BT2 FAQ
For more information, or to view other Frequently Asked Questions, visit the Shure FAQ.
Remote + Mic, Telephony, Voice Command and In-App use
Q.) How do I pair my wireless Sound Isolating earphones with my device? A.) With the wireless earphones OFF, activate pairing mode by holding center button for 7 seconds on the remote. Navigate to Bluetooth settings in the source device settings, and the device SHUREBT2 should appear in available devices. Select SHUREBT2, and your device should be paired. Q.) How do I set up multi-point pairing? How do I change active devices? A.) Multipoint pairing is set up automatically--pair a second device (power cycle by holding the power button down until the earphones turn off, and press again for 7 seconds to enter pairing mode). The playback between devices should be triggered by new activity (incoming call, new playback). If devices do not automatically recognize the wireless earphones as an output device, manually disconnect and re-select in device settings. Q.) Are my wireless Sound Isolating earphones designed for calls? A.) The Bluetooth protocol has both headset and stereo audio playback features builtin. The twoway audio and remote func tions are included in that protocol, and the inline microphone located on the right side cable is provided for calls and voice com mands. Q.) Does the cable work with my iPhone/iPod/iPad/Android device? A.) Any device supporting Bluetooth stereo audio playback and telephony protocols is compatible, including Apple and many Android devices. We recommend downloading and installing the latest compatible operating system to ensure all drivers are up-to-date. Q.) Do my wireless Sound Isolating earphones work with Siri? A.) Yes. Hold the center button on the remote for 3 seconds to activate Siri or other voice service. (Source device dependent.) Q.) How do I use voice commands? A.) Hold down the multi-function center button (power/answer/end call) for 3 seconds to prompt voice command software. (Source device dependent) Q.) What device controls do the cable and earphones support? How do I use them? A.) The center button may be used for play, pause of media, and answering and ending phone calls. Volume up (+) button can also be depressed for 3 seconds to skip forward to the next song. The volume down (-) button can similarly be depressed for 3 seconds to skip to the beginning of the song (or to a previous song within approximately 5 seconds of the beginning of a track). The center button will power down the earphones when held for 5 seconds. Hold the power button down for three seconds to power the device back on. Q.) Will my wireless Sound Isolating earphones work with fitness apps? A.) Yes, most apps that have audio prompts will work, just like wired earphones.
Note: These earphones will not provide heart rate or other biometrics.
11/24

Shure Incorporated
Battery, Durability, Range and Charging
Q.) Are my wireless Sound Isolating earphones IPX-rated for water resistance? Are they suited to exercise? A.) These wireless earphones are not IPX-rated for water resistance. However, the cable, transmitter/receiver, and remote + mic pod are subject to the same stringent battery of tests for moisture resistance that all of our earphones undergo. Also, when used in conjunction with the clothing clip, the snug, comfortable fit of the Sound Isolating design and eartips, and wireform ca ble (SE215 and RMCE-BT2 only) provides long-wearing comfort, providing a secure seal with the ear canal during even the most intense workouts. As such, these (and any earphones paired with the RMCE-BT2) are completely suitable for exercise. However, we cannot recommend use during any activities where awareness of surroundings are necessary (such as cycling or driving), and where prohibited by law. Q.) How long will the battery on my wireless Sound Isolating earphones last between charges? A.) When new, the BT2 battery will play back music for up to 10 hours, depending on volume and audio listened to. Q.) How do I charge my earphones? How do I know when the battery is charged? A.) The supplied USB cable can be plugged into any standard 5V USB connection, including those supplied with devices, and on computers or laptops. For safety, do not connect to charger producing higher than 1 A of current. The LED light will be solid red when charging. When fully charged, the LED will turn off. Q.) How long does it take to charge the battery? A.) The battery charges fully in about 2 hours, depending on power source used. A "quick charge" will get up to two hours of playback on just fifteen minutes of charging time. Q.) Can I listen while my earphones are charging? A.) Yes, you can use the product while it is charging.
Use with SE Earphones
Q.) Why would I pick wireless Sound Isolating earphones over wired earphones? A.) Wireless Sound Isolating earphones provide the great sound of wired SE earphones with the freedom of motion that sepa rating your playback device from your earphones offers. This is ideal for high-impact exercise (running, spin classes) where movement of the body may cause entanglement and result in an uncomfortable pull on the ears. Wireless earphones are also ideal for travel and commuting, where hands-free media control and telephony are key features.
Note: Some airlines permit Bluetooth use in-flight. Check with your airline provider before travelling with the SE112-BT1, SE215-BT1 or RMCE-BT1 or RMCEBT2.)
The wireless earphones may be ideal for iPhone 7 and other devices that do not have a standard headphone output as an al ternative to the RMCE-LTG (for Lighting-equipped iOS devices only). The MMCX connectors standard on most SE earphones, like the SE215 and SE846, mean you don't have to choose between wired and wireless. Simply add an RMCE Remote + Mic accessory cable, RMCE-LTG (for iPhone 7 and iPhone 7 Plus), or the EAC64 replacement detachable cable (if the telephony features of the Remote + Mic cable isn't required). Q.) What models of SE earphones are the RMCE-BT2 for? A.) All models of SE earphones with MMCX connectors, including SE215, SE315, SE425, SE535 and SE846 Sound Isolating earphones are compatible with the RMCE-BT2. Q.) Do the BT2 cable and earphones support Bluetooth aptXTM codec? A.) Yes. BT2 products support Qualcomm®aptX audio, aptX HD, aptX Low Latency, AAC, SBC aptX codecs. Why am I experiencing dropouts with my wireless Sound Isolating earphones? While the Bluetooth protocol defines standard range as up to 10 m (30 ft), the ideal distance between devices is significantly smaller, especially when outdoors where reflections are minimal. Similarly, the range can be much further in enclosed spaces, where a lot of reflections of the signal are permitted. Absorption of signal by skin or garments may impact connectivity (espe cially keeping the music device in a pocket with keys, credit cards, which may act as an unwanted antenna for the phone), and a line-of-sight signal should be established to troubleshoot any connectivity or dropout issues.
12/24

Shure Incorporated
How can I get the most reliable wireless performance with BT2? Your Shure RMCE-BT2 supports multiple Bluetooth codecs: SBC, AAC, QualcommaptX audio, aptX HD, aptX Low Latency codecs. Bluetooth codecs/transmissions have varying wireless performance based on:
· Interference from other wireless devices · Distance from source · Physical barriers between source and receiver, such walls or people · The density/size of the wireless transmission. (codec related)
iOS devices automatically set the codec, and an end user cannot make any changes, or choose a different codec. (iOS sup ports SBC and AAC only). Android devices with the latest firmware updates can select which codec is used in the Bluetooth settings menu of your Android source.
Note: Android users: To maximize performance, and minimize signal dropouts, choose the codec that works best in your environment.

Accessories
· Earphone Sleeves · Replacement Cables · Carrying Cases · Music Phone Accessory Cables · Volume Control · Adapters
For information about earphone accessories and other Shure products visit:
http://www.shure.com/en-US/products/accessories
Accessory Cables for Mobile Devices Quick Start Guides
RMCE cables are compatible with all Shure earphones.
· Remote and Mic Lightning Cable for iOS (RMCE-LTG) · Remote and Mic Universal Cable for iOS and Android (RMCE-UNI) · Remote and Mic USB Cable for Android (RMCE-USB)
In North America:

Custom Earphone Sleeves
Those who use earphones regularly for extended periods of time often find custom-fit molded sleeves offer the best comfort and sound isolation.Through a partnership between Shure Incorporated and Sensaphonics Hearing Conservation, custom sleeves are available for use with your Shure Sound IsolatingTM Earphones.
Please contact Sensaphonics for more information.

Inserts d'écouteur sur mesure
Les personnes qui utilisent des écouteurs régulièrement pendant de longues périodes trouvent souvent que des inserts moulés sur mesure offrent le meilleur confort et la meilleure isolation acoustique. Grâce à un partenariat entre Shure Incorpo rated et Sensaphonics Hearing Conservation, des inserts sur mesure sont disponibles pour les écouteurs Sound Isolating de Shure.
Prière de consulter Sensaphonics pour plus de détails.

13/24

Shure Incorporated
Manguitos personalizados para auriculares
Quienes usan auriculares con regularidad por lapsos prolongados a menudo hallan que los manguitos moldeados a medida ofrecen la mejor comodidad y aislamiento del ruido. Por medio de una asociación de Shure Incorporated con Sensaphonics Hearing Conservation, se ofrecen manguitos personalizados para uso con los auriculares aislantes del ruido Sound Isolating de Shure. Comuníquese con Sensaphonics para más información.

Sensaphonics Hearing Conservation 660 N. Milwaukee Avenue Chicago, IL 60622 Phone: In Chicago: (312) 432-1714 Toll Free: (877) 848-1714 E-mail: saveyourears@sensaphonics.com http://www.sensaphonics.com
Specifications
Transducer Type
SE535/535LTD Red
SE425
SE315
SE215
Sensitivity
at 1 kHz
SE535/535LTD Red
SE425
SE315
SE215
SE112
Impedance
at 1 kHz
SE535/535LTD Red
SE425
SE315

Triple balanced-armature drivers Dual balanced-armature drivers Single High-Definition MicroDriver Single Dynamic MicroDriver
119 dB SPL/mW 109 dB SPL/mW 116 dB SPL/mW 107 dB SPL/mW 105 dB SPL/mW
36 22 27

14/24

Shure Incorporated

SE215

SE112

Frequency Range
SE535

18 Hz19 kHz

SE535LTD Red

18 Hz19.5 kHz

SE425

20 Hz19 kHz

SE315

22 Hz18.5 kHz

SE215

22 Hz17.5 kHz

SE112

25 Hz17 kHz

Input Connector
Goldplated 3.5 mm (1/8") stereo mini jack plug with 6.35 mm (1/4") threaded adapter

Net Weight
SE535 SE425 SE315
Operating Temperature
SE535 SE425 SE315
Storage Temperature
SE535 SE425 SE315

30 g (1 oz.) 30 g (1 oz.) 30 g (1 oz.)
-18°C to 57°C (0°F to 135°F) -18°C to 57°C (0°F to 135°F) -18°C to 57°C (0°F to 135°F)
-29°C to 74°C (-20°F to 165°F) -29°C to 74°C (-20°F to 165°F) -29°C to 74°C (-20°F to 165°F)

Bluetooth Specifications
Integrated Microphone
RMCE-BT1
RMCE-BT2
Polar Pattern
RMCE-BT1
RMCE-BT2

MEMS MEMS
Omnidirectional Omnidirectional

15/24

Sensitivity
RMCE-BT1 RMCE-BT2
Compatible Earphones
RMCE-BT1
RMCE-BT2
Compatible Sources
RMCE-BT1 RMCE-BT2
Antenna Type
RMCE-BT1 RMCE-BT2
Antenna Gain
RMCE-BT1 RMCE-BT2
Bluetooth Version
RMCE-BT1 RMCE-BT2
Operating Frequency
RMCE-BT1 RMCE-BT2
Modulation Type
RMCE-BT1 RMCE-BT2
RF Output Power
RMCE-BT1 RMCE-BT2
Supported Codecs
RMCE-BT1 RMCE-BT2

Shure Incorporated
11 dBV at 1 kHz (Pa=94 dB SPL) 38 dBV at 1 kHz (Pa=94 dB SPL)
All Shure detachable earphones with MMCX con nectivity All Shure detachable earphones with MMCX con nectivity
Any A2DP Bluetooth stereo source Any A2DP Bluetooth stereo source
Chip Chip
+2.13 dBi +1.6 dBi
4.1 5
2402 to 2480 MHz 2402 to 2480 MHz
FHSS FHSS
+5.38 dBm (E.I.R.P) +7.45 dBm (E.I.R.P)
SBC aptXTM, aptX HD, aptX Low Latency, SBC, AAC
16/24

Range
RMCE-BT1 RMCE-BT2
Dimensions
Cable Length
SE112-BT1 RMCE-BT1 RMCE-BT2
Net Weight
SE112-BT1 RMCE-BT1 RMCE-BT2
Operating Temperature
SE215-BT1 SE112-BT1 RMCE-BT2
Storage Temperature
SE215-BT1 SE112-BT1 RMCE-BT2
Battery Specifications
Battery Type
RMCE-BT1 RMCE-BT2
Nominal Voltage
RMCE-BT1 RMCE-BT2
Battery Life
RMCE-BT1 RMCE-BT2
Total Battery Life
RMCE-BT1

Shure Incorporated
10 m (32.8 ft) 10 m (32.8 ft)
760.0 mm (29.9 in.) 790.0 mm (31.1 in.) 736.6 mm (29.0 in.)
17.5 g (0.62 oz.) 13.8 g (0.47 oz.) 18.0 g (0.63 oz.)
0°C to 45°C (32°F to 113°F) 0°C to 45°C (32°F to 113°F) 0°C to 45°C (32°F to 113°F)
-10°C to 50°C (14°F to 122°F) -10°C to 50°C (14°F to 122°F) -10°C to 50°C (14°F to 122°F)

Rechargeable Li-Ion Rechargeable Li-Ion
3.7 V DC 3.7 V DC
up to 8 hours up to 10 hours
120 mAh

17/24

RMCE-BT2
Charging Requirements
USB Source
RMCE-BT1 RMCE-BT2
Charging Time
RMCE-BT1 RMCE-BT2
Quick Charge
RMCE-BT1
RMCE-BT2
Battery Charging Temperature Range
RMCE-BT1 RMCE-BT2
Headphone Amplifier Specifications
Output Noise
RMCE-BT1 RMCE-BT2
THD+N
Typical
RMCE-BT1 RMCE-BT2
Frequency Response
RMCE-BT1 RMCE-BT2
Output Impedance
RMCE-BT1 RMCE-BT2

200 mAh

Shure Incorporated

5 V DC, 100 mA, minimum 5 V DC, 100 mA, minimum
2 hours 2 hours
Up to 1.5 hours of play time with 15 minutes of charge time Up to 1.5 hours of play time with 15 minutes of charge time
0 to 45 °C (32 to 113 °F) 0 to 45 °C (32 to 113 °F)

8.5 uVrms 2.2 uVrms
0.1% 0.02%
10 to 22,000 Hz, + 0.5 dB 10 to 22,000 Hz, + 0.5 dB
3.9 0.6

18/24

Shure Incorporated
SAFETY PRECAUTIONS
Before using this product, please read and save the enclosed warnings and safety instructions.
WARNING FOR ALL EARPHONES!
Use, clean, and maintain earphones according to manufacturer's instructions.
SAFETY PRECAUTIONS
The possible results of incorrect use are marked by one of the two symbols--"WARNING" and "CAUTION"--depending on the imminence of the danger and the severity of the damage.
WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect op eration.
CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation.
WARNING
· If water or other foreign objects enter the inside of the device, fire or electric shock may result. · Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. · Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking,
or jogging where traffic is present and accidents could occur. · Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or se
rious injury. Contains small parts and cords that may pose risk of choking or strangulation. · Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle to decrease the
risk of sleeves detaching from the nozzle and becoming lodged in your ear. If a sleeve becomes lodged in your ear, seek professional medical assistance to remove the sleeve. · Stop using the earphones and consult a medical professional if you experience irritation, excessive wax buildup, or other discomfort.
CAUTION
· Never disassemble or modify the device, as failures may result. · Do not subject to extreme force and do not pull on the cable or failures may result. · Keep the earphone dry and avoid exposure to extreme temperatures and humidity. · If you are currently receiving ear treatment, consult your physician before using this device.

High sound pressure Hearing damage risk To prevent possible hearing damage, do not listen at high volume levels for long periods.
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.

19/24

Shure Incorporated
2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli
fiers) that produce heat. 9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace ment of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
For Products That Use Bluetooth
WARNING
· Follow instructions from manufacturer. · Product battery may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble,
heat above 140°F (60°C), or incinerate. · Attention should be drawn to the environmental aspects of battery disposal. · Product shall not be exposed to excessive heat such as sunshine, fire, or the like. · Do NOT make unauthorized alterations to this product.
CAUTION
· Follow applicable laws regarding mobile phone and headphone use while driving. · This product contains magnetic material. Consult your physician on whether this might affect your implantable medical de
vice. · Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like · Batteries (battery pack or batteries installed) shall not be crushed or cut · Batteries (battery pack or batteries installed) shall not be subjected to extremely low air pressure · Risk of fire or explosion if the battery is replaced by an incorrect type

Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference.

20/24

Shure Incorporated
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa tion. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and the receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This device contains licenceexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop ment Canada's licenceexempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valu able raw materials and the treatment of toxic substances.
Certifications
Visit www.shure.com for the latest regulatory and compliance information.
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance.
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
21/24

Shure Incorporated
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR102 établies pour un environnement non con trôlé. Cet émetteur ne doit pas être situé au même endroit ou fonctionner avec une autre antenne ou un autre émetteur. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CE Notice: Hereby, Shure Incorporated declares that this product with CE Marking has been determined to be in compliance with European Union requirements. The full text of the EU declaration of conformity is available at the following site: https:// www.shure.com/en-EU/support/declarations-of-conformity. Authorized European representative: Shure Europe GmbH Department: Global Compliance Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: EMEAsupport@shure.de
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shure Incorporated is under license. Other trademarks and trade names are those of their respective owners.
QualcommaptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Apple, iPad, iPhone, iPod and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. tvOS is a trademark of Apple Inc. The trademark "iPhone" is used in Japan with a license from Aiphone K.K. Mac® and Lightning® are registered trademarks of Apple Inc.
LIMITED WARRANTY
Shure Incorporated ("Shure") hereby warrants to the original consumer purchaser only that, except as otherwise specified be low, this product will be free in normal use of any defects in materials and workmanship for a period of two (2) years from the consumer's original date of purchase directly from Shure or from a Shureauthorized reseller. Any rechargeable batteries contained in or packaged with this product are so warranted for a period of one (1) year from the consumer's original date of purchase. However, rechargeable batteries are consumable and their capacity will be reduced over
22/24

Shure Incorporated
time based on temperature, amount of time in storage, charging cycles, and other factors; hence reduction in battery capacity does not constitute a defect in material or workmanship. At its sole option, Shure will repair or replace the defective product and promptly return it to you. In order for this warranty to be valid, the consumer must, at the time the product is returned, provide proof of purchase in the form of the original purchase re ceipt directly from Shure or from a Shureauthorized reseller. If Shure elects to replace the defective product, then Shure re serves the right to replace the defective product with another product of the same model or a model of at least comparable quality and features in Shure's sole determination. If you believe this product is defective within the warranty period, carefully repack the unit, insure it and return it with proof of purchase, postage prepaid, to Shure Incorporated, Attention: Service Department, at the address below. Outside of the United States, return the product to your dealer or Authorized Service Center. Addresses are listed on www.Shure.com or can be obtained by contacting Shure at the address listed below. This warranty is not transferable. This warranty does not apply in cases of abuse or misuse of the product, use contrary to Shure's instruction, ordinary wear and tear, an act of God, negligent use, purchase from a party other than Shure or a Shure authorized reseller, unauthorized repair, or modification of the product. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DIS CLAIMED TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS AND, TO THE EXTENT NOT PERMITTED, ARE HEREBY LIMITED TO THE DURATION AND TERMS OF THIS WARRANTY. SHURE ALSO HEREBY DISCLAIMS ALL LIABILITY FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or conse quential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. This warranty does not restrict the rights of the consumer mandated under applicable laws. THIS WARRANTY SUPERSEDES ALL OTHER WARRANTIES THAT ARE ASSOCIATED OR INCLUDED WITH THIS PROD UCT, EXCEPT THAT ANY SOFTWARE CONTAINED IN OR PACKAGED WITH THIS PRODUCT IS EXCLUDED FROM THIS WARRANTY AND INSTEAD SHALL BE COVERED BY THE WARRANTY, IF ANY, PROVIDED IN SHURE'S END USER LI CENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.
FOR ORIGINAL PURCHASES IN AUSTRALIA ONLY
LIMITED WARRANTY AGAINST DEFECTS
Shure Incorporated ("Shure") hereby warrants to the original consumer purchaser in Australia only that, except as otherwise specified below, this product will be free in normal use of any defects in materials and workmanship for a period of two (2) years from the consumer's original date of purchase directly from Shure or from a Shure-authorized reseller. Any rechargeable batteries contained in or packaged with this product are so warranted for a period of one (1) year from the consumer's original date of purchase. However, rechargeable batteries are consumable and their capacity will be reduced over time based on temperature, amount of time in storage, charging cycles, and other factors; hence reduction in battery capacity does not constitute a defect in material or workmanship. At its sole option, Shure will repair or replace the defective product and promptly return it to you. In order for this warranty to be valid, the consumer must, at the time the product is returned, provide proof of purchase in the form of the original purchase re ceipt directly from Shure or from a Shureauthorized reseller. If Shure elects to replace the defective product, then Shure re serves the right to replace the defective product with another product of the same model or a model of at least comparable quality and features in Shure's sole determination. If you believe this product is defective within the warranty period, carefully repack the unit, insure it and return it with proof of purchase, postage prepaid, to Shure Incorporated, Attention: Service Department, at the address below. Outside of the United States, return the product to your dealer or Authorized Service Center. Addresses are listed on www.Shure.com or can be obtained by contacting Shure at the address listed below.
23/24

Shure Incorporated
This warranty is not transferable. This warranty does not apply in cases of abuse or misuse of the product, use contrary to Shure's instruction, ordinary wear and tear, an act of God, negligent use, purchase from a party other than Shure or a Shure authorized reseller, unauthorized repair, or modification of the product. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DIS CLAIMED TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS AND, TO THE EXTENT NOT PERMITTED, ARE HEREBY LIMITED TO THE EXTENT PERMITTED TO THE DURATION AND TERMS OF THIS WARRANTY. SHURE ALSO HEREBY DISCLAIMS ALL LIABILITY FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES FOR ANY PUR CHASER ACQUIRING THIS PRODUCT, EXCEPT THAT THIS DOES NOT CONSTITUTE A DISCLAIMER OF RIGHTS GUAR ANTEED TO ANY "CONSUMER" UNDER THE AUSTRALIAN CONSUMER LAW. This warranty gives purchasers of this product in Australia specific legal rights which are in addition to the rights and remedies of consumers under the Australian Consumer Law, which cannot be excluded or limited. If you are a "consumer" under the Australian Consumer Law, you are entitled to a replacement or refund for a major failure and for compensation for any other reasonably forseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. THIS WARRANTY SUPERSEDES ALL OTHER WARRANTIES THAT ARE ASSOCIATED OR INCLUDED WITH THIS PROD UCT, EXCEPT THAT ANY SOFTWARE CONTAINED IN OR PACKAGED WITH THIS PRODUCT IS EXCLUDED FROM THIS WARRANTY AND INSTEAD SHALL BE COVERED BY THE WARRANTY, IF ANY, PROVIDED IN SHURE'S END USER LI CENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.
Service and Repair Information
Service and repair for Shure products is handled by Shure Incorporated and our Authorized Distribution Centers. Click "Get Started" to follow a sequence of steps that will help you to determine whether your product needs to be sent off for service or repair and direct you to the necessary actions.
Note: To receive service or repairs for your Shure product, you will be required to mail us your product.
Start the Service and Repair Process
Service Centers
United States, Canada, Latin America, Caribbean Shure Incorporated Attn: Service Department 945 Chaddick Dr. Wheeling, IL 60090-6449 U.S.A. Europe, Middle East, and Africa Shure Europe GmbH Attn: Service Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany IndonesiaService Center Resmi: Jakarta Hotline (021) 612 6388 Medan (061) 6612550 Surabaya (031) 5032219 Jogjakarta (0274) 371710 Denpasar (0361) 766788 Makasar (0411) 324652
24/24

SE215M
Shure Earphones

General Description
Shure Sound IsolatingTM Earphones, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a

detachable cable, adapters, a durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit.

Wearing the Earphones
The following are some suggested ways of wearing the earphones.

Wear the cable over the ear and secure it behind the head to help keep the earphones in place during physical activity.
Tighten the cable and take up slack by raising the cable cinch.

Over the ear in back
Detachable Cable
You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone and connector.
· Do not use pliers or other tools. · Grasp the connector and the earphone as close as possible to where
they join. · Pull straight apart--do not twist. Cable is a snap fit, not threaded.
Note: If you pull at an angle, the connector will not detach. · Do not pull on the cable or put any pressure on the earphone nozzle. · Listen for a click when connecting. · When reattaching the cable, match the "L" and "R" markings. For clear
cables and earphones, match the color dots (Red=Right, Blue=Left).

Audible click when properly connected

Inserting the Earphones
Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.

1/4

SE215M Shure Earphones

Shure Incorporated

Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the earphone deeper into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.

Changing Sleeves
· Twist and pull to remove the sleeve from the nozzle.
· Slide on a new sleeve so that it completely covers the barb and the nozzle.

Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves).

Removing the Earphones
Grasp the body of earphone and gently twist to remove.

Note: Do not pull on cable to remove earphone.

2/4

2017/10/09

SE215M Shure Earphones

Shure Incorporated

Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove.

Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber.
Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands.

Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve.

Using the Remote
Use the remote to control compatible media phone players.
· Answer/End Call: Click the center button once. · When answering calls speak in a normal manner. · Answer/end calls on most phones by pressing the center button once.

Please read your mobile device's user guide for more information on how to use the answer/end button, check for additional features, or to troubleshoot usage problems.
NOTE: On some phones it might be necessary to adjust the volume when switching from phone call to music.
For more information about compatible models go to: www.shure.com

Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
· Keep the earphones and sleeves as clean and dry as possible. · To clean sleeves, remove them from earphones, gently rinse in warm
water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing. · Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants. · Do not expose earphones to extreme temperatures. · Replace sleeves if they do not fit properly. · Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure.
Cleaning the Earphone Nozzle
If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire loop end of cleaning tool.
If no obstruction is found or if sound quality does not improve, replace the sleeve with a new sleeve.

Wire Loop
Cleaning Tool
Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter. Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury. The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them using a dry cotton swab.

Specifications
Transducer Type Single High-Definition MicroDriver

Sensitivity
at 1 kHz
107 dB SPL/mW

2017/10/09

3/4

SE215M Shure Earphones

Shure Incorporated

Impedance
at 1 kHz
17

Frequency Range SE215 Special Edition SE215
Net Weight 30 g (1 oz.)

21 Hz17.5 kHz 22 Hz17.5 kHz

Accessories
For information about earphone accessories and other Shure products visit:
www.shure.com

Furnished accessories subject to change.

Certifications
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: info@shure.de

Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com

4/4

SOUND ISOLATINGTM EARPHONES
SE215 Internal Component View

SE215 COMPONENTS
A Rugged Ergonomic Housing Ergonomic and stylish design features durable, sweat-resistant construction; built to withstand the extremes of on-stage or everyday wear.
B Single Dynamic MicroDriver Delivers detailed sound with enhanced bass in a very small size.
C Acoustic Seal Prevents audio leaks from front to back cavity for proper acoustic performance, and provides additional shock protection for the MicroDriver.
D Driver Support Frame Protects the MicroDriver from sudden impact and holds it securely in place.

E MMCX Micro-Miniature Coaxial Connector Gold-plated connector has a lock-snap mechanism allowing 360 degree rotation for comfortable fit.
F Nozzle Specially angled tube ensures efficient audio delivery and ergonomic fit.
G Detachable Cable Allows for easy replacement or customization. Kevlar® reinforced for durability, and wireform fit ensures secure placement over the ear.
H Sound IsolatingTM Sleeve Selection of foam and flex sleeves create a customized fit and comfortable seal that blocks background noise.

References

Adobe Acrobat Pro (32-bit) 23.6.20360