Avigilon H5A Fisheye Surface Mounting Template

Instructions

Print this mounting template on 8.5"x11" paper to maintain the correct size. Print at original size and do not use scaling in print options.

Verification

Verify the template is printed to the correct size by measuring the outer magenta-colored box and comparing it to the dimensions:

• Height: 158.8 mm (6.25")
• Width: 190.5 mm (7.5")

Mounting Diagram Description

This section describes the Fisheye Surface Mounting Template diagram.

The diagram features a circular outline with a dashed border, indicating the mounting area. Key elements include:

• A "CONDUIT LANDING AREA" on the left, with a hatched section and a "CONDUIT REF" label.
• A representation of a "THROUGH WALL CABLE ENTRY HOLE LOCATION" marked at 3/4" (19mm).
• A label indicating "MAX SCREW SIZE: #10/5mm TYPE".
• Two "LOGO" placeholders are positioned within the circular area.
• Several mounting points are indicated by circles, with dimensions provided relative to the center:
  • A vertical distance of 2.22" (56.4mm) from the center to the top.
  • A radius of R2.48" (63.0mm) at the top.
  • A horizontal distance of 0.16" (4.1mm) from the center to a hole on the right.
  • A horizontal distance of 1.73" (43.9mm) from the center to a hole on the left.
  • A vertical distance of 2.07" (52.6mm) from the center to a hole below the center line.
  • A distance of 0.31" (7.9mm) from the center to the conduit entry hole.
• A triangular marker [orientation marker] is located at the top of the circular outline.
• A graphic element resembling a cutting tool [cutting tool icon] is shown near the conduit entry hole.