NETGEAR M4350 Series Fully Managed Switches Installation Guide

Installation Guide for NETGEAR models including: M4350 Series Fully Managed Switches, M4350 Series, Fully Managed Switches, Managed Switches, Switches

NETGEAR Auxiliary Power Supplies for the M4350 Series Fully Managed Switches APS600Wv3, APS1200Wv2, and APS2000Wv2 Installation Guide

switch PSU, switch APS, managed switch power supply unit, managed switch auxiliary power supply, APS600Wv3, APS1200Wv2, APS2000Wv2, M4350-24X8F8V, XSM4340V, M4350-36X4V, XSM4340CV, M4350-32F8V, XSM4340FV, M4350-16V4C, VSM4320C, M4350-40X4C, XSM4344C

NETGEAR

Download

APS2000Wv2 | Modules & Accessories | NETGEAR Support

File Info : application/pdf, 2 Pages, 314.12KB

APS600Wv3 APS1200Wv2 APS2000Wv2 IG EN

Installation Guide
Auxiliary Power Supplies for the M4350 Series Fully Managed Switches
APS600Wv3, APS1200Wv2, and APS2000Wv2
Package contents
· Auxiliary power supply · Power cord (varies by region) · Installation guide
November 2023

Overview

The APS600Wv3, APS1200Wv2, and APS2000Wv2 auxiliary power supplies (APS) are supported in the following M4350 series switch models:

· M4350-24X8F8V · M4350-36X4V · M4350-32F8V · M4350-16V4C · M4350-40X4C

(SKU: XSM4340V) (SKU: XSM4340CV) (SKU: XSM4340FV) (SKU: VSM4320C) (SKU: XSM4344C)

Each APS has an LED that indicates the power supply status, as described in the following table.

LED

Status

Solid green

DC output is present and voltage is good.

Off

Loss of AC power occurred or AC power is not present.

Blinking green AC power is present but DC output is for standby only.

Blinking amber

Warnings for abnormal events, like high operating temperature, high output current, slow fan, high output power.

Solid amber A power supply failure occurred and the APS will be shut down.

Install an APS
In models with more than one power supply bay, you can install an additional APS.
1. Pull out the cover plate from the power module bay in which you want to insert the additional APS.
2. Insert the APS into the power module bay, and gently push the APS into the bay. CAUTION: When inserting the APS, do not use unnecessary force. Doing so can damage the connectors on the back of the APS and on the midplane.
3. Connect the end of the power cord to the power receptacle on the APS. 4. Plug the AC power cord into a power source such as a wall socket or power strip.

Replace an APS
In models with more than one APS, the APSs are hot-pluggable. 1. If your switch functions with a single APS only, disconnect the power cord from the
APS and let the switch power down. If your switch functions with more than one APS, you do not need to power down the switch and you can perform a hot swap. 2. Remove the APS from the power module bay by doing the following: a. Position the extraction handle perpendicular to the APS. b. Insert your left index finger into the extraction handle. c. Use your left thumb to move the orange release latch to the left and keep it in the
release position. d. Pull the extraction handle. We recommend that you use your right hand to support the APS.
3. Insert the replacement APS into the power module bay, and gently push the APS into the bay until the latch locks. CAUTION: When inserting the APS, do not use unnecessary force. Doing so can damage the connectors on the back of the APS and on the midplane.
4. Connect the end of the power cord to the power receptacle on the APS. When you apply power, the LED on the APS lights. The LED on the switch for the power supply bay also lights. If these LEDs do not light, make sure that the power cord is plugged in and that the power source is good.

Technical specifications

Feature

APS Model Specifications

AC input DC output

APS600Wv3 APS1200Wv2 APS2000Wv2 APS600Wv3
APS1200Wv2

100-120VAC, 8.5A, 50-60 Hz 200-240VAC, 4.5A, 50-60 Hz
100-120VAC, 12A, 50-60 Hz 200-240VAC, 10A, 50-60 Hz
100-120VAC, 12A, 50-60 Hz 200-240VAC, 10A, 50-60 Hz
+54.5VDC, 11.01A @ 90-132 VAC +54.5VDC, 11.01A @ 180-200VAC +54.5VDC, 11.01A @ 200-264VAC
+54.5VDC, 18.69A @ 90-132 VAC +54.5VDC, 22.43A @ 180-264 VAC

APS2000Wv2

+54.5VDC, 18.69A, @ 90-132 VAC +54.5VDC, 33.64A, @ 180-198 VAC +54.5VDC, 37.38A, @ 198-264 VAC

Dimensions (H x W x D) Operating temperature

All models APS600Wv3 APS1200Wv2

1.6 x 2.9 x 7.3 in (40 x 73.5 x 185 mm) 32°F to 131°F (0°C to 55°C ) 32°F to 131°F (0°C to 55°C )

Operating relative humidity Operating altitude level

APS2000Wv2 All models All models

32°F to 122°F (0°C to 50°C ) 5% to 85% relative humidity Up to 16,404 feet (5,000 m)

Storage temperature

APS600Wv3 APS1200Wv2 APS2000Wv2

40°F to 176°F (40°C to 80°C ) 40°F to 185°F (40°C to 85°C ) 40°F to 176°F (40°C to 80°C )

Storage altitude level

All models

Up to 49,859 feet (15,200 m)

Feature MTBF Compliance - Safety
Compliance - EMC

APS Model All models All models
All models

Specifications
Minimum MTBF at continuous operation of 250,000 hours, input voltage of 230VAC, inlet temperature of 104°F (40°C), and output load of 80%, as calculated by Bellcore Telcordia SR-332-Issue 2
CSA CE KC RCM CCC/CQC BIS BSMI
FCC ICES-003 CE VCCI KC RCM CCC/CQC BSMI

Warranty

Visit the NETGEAR warranty page to view the warranty information for your new NETGEAR device:

Australia: www.netgear.com/au/ about/warranty/

Japan: www.netgear.com/jp/ about/warranty/

China: www.netgear.com/cn/ about/warranty/

All other countries: Visit
www.netgear.com/about/
warranty/ and click the flag to select
your country.

Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEAR's Privacy Policy, visit netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEAR's Terms and Conditions at netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
Do not use this device outdoors. If you connect cables or devices that are outdoors to the switch, see kb.netgear.com/000057103 for safety and warranty information.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

http://support.netgear.cn/China-RoHS

NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD Floor 6, Penrose Two, Penrose Dock, Cork, T23 YY09, Ireland

References

Adobe PDF Library 17.0