KAGE GreatER Bar™ Owners Manual

Operational Notes and Adjustments

Spring tubes should be visually checked for blockage before each use. Replace blades before wear in mounting angle begins.

The default length for the toplink is 13 inches. Lengthening or moving the toplink to the lower bit hole will allow teeth deployment with less downward angle. However, this will increase the pressure required to activate the teeth. Lighter machines may need to reduce the length of the top link.

Tooth depth can be increased by 1-1/2 inches by removing the plastic spacer.

Key dimensions noted include: 24 5/16 inches, 7 1/5 inches, 2 1/2 inches, 4 1/5 inches, and 13 inches. A note indicates 'Skid Steer door clearance'.

GreatER Bar with Teeth 72 (GBT72)

This section features an exploded view diagram illustrating the assembly of the GreatER Bar with 72 teeth (Model GBT72). Various components are numbered for reference, indicating their positions in the assembly. The diagram includes a label 'Extend spring bottom fully' and indicates the total weight as 932 LBS.

Parts List

GreatER Bar with Teeth 84 (GBT84)

This section presents an exploded view diagram for the GreatER Bar with 84 teeth (Model GBT84). Similar to the GBT72 diagram, components are numbered for assembly reference. The diagram includes a label 'Extend spring bottom fully' and indicates the total weight as 1066 LBS.

Parts List

GreatER Bar 72 (GB72) - Assembly Overview

This section shows a diagram of the GreatER Bar model GB72. A simplified parts list is provided below the diagram, detailing key components and their quantities. The total weight is listed as 658.00 LBS.

GreatER Bar 84 (GB84) - Assembly Overview

This section displays a diagram for the GreatER Bar model GB84. A simplified parts list is included, identifying main components and their quantities. The total weight is indicated as 709.24 LBS.

Kage Limited Warranty

Kage Innovation will repair or, at the option of Kage Innovation, replace those parts which prove defective due to material or workmanship under normal use for a period of two (2) years from the date of retail sale or date of invoice from Kage Innovation, whichever is later. Expendable items, such as rubber, or polyurethane are excluded from this warranty.

Kage Innovation warrants that the products manufactured by us to be in accordance with our published specifications or those specifications agreed to by us in writing at the time of sale. The obligation of Kage Innovation is expressly limited to repairing or replacing, at its option, any product not meeting such specifications within the warranty period.

Limitations of Warranty and Damages

KAGE INNOVATION MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND MAKES NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF.

IN NO EVENT SHALL KAGE INNOVATION BE HELD LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR DAMAGES RESULTING FROM MISAPPLICATION, ABUSE, MISUSE, ACTS OF GOD, UNAUTHORIZED ALTERATION OF THE KAGE INNOVATION PRODUCT, OR SUBSTITUTION OF PARTS NOT AUTHORIZED IN WRITING BY KAGE INNOVATION.

Obtaining Service

To obtain service under this warranty, the consumer must return the defective Kage Innovation product to Kage Innovation directly, the dealer from which the product was purchased or to any authorized Kage Innovation dealer, transportation and freight charges prepaid. Only Kage Innovation dealers are authorized to perform the obligations under this warranty with pre-authorization from Kage Innovation.

No person is authorized to alter or amend this warranty or to create any warranty other than that set forth herein without the expressed written consent of Kage Innovation.

Kage Innovation reserves the right to make improvement changes on any of its products without prior notice.

Revision History

Date: 5/25/2025, Name: Josh, Description: Updated GBT72 parts breakdown for better clarity, pages 3,5.