Joy-IT COM-5WS 5-Way Navigation Switch

Introduction

This document provides essential information for the Joy-IT COM-5WS 5-Way Navigation Switch. It covers basic functionalities, connection diagrams, and practical examples for integration with popular development platforms like Raspberry Pi and Arduino.

Module Overview and Connection

The COM-5WS is a versatile navigation switch featuring 5 directional inputs (up, down, left, right, press) and two additional buttons (SET, RST). All contacts are designed to work with a common ground pin, simplifying wiring.

Connection Diagram

Refer to the provided diagrams for pin assignments when connecting to your development board.

Raspberry Pi Integration

This section details how to connect the 5-way navigation switch to a Raspberry Pi. It includes a pin mapping table and a Python code example to read switch inputs.

Sample code and resources can be downloaded from: Download Raspberry Pi Example

Arduino Integration

Instructions for connecting the COM-5WS module to an Arduino board are provided, along with a corresponding C++ code example to detect button presses and directional inputs.

Further details and code can be accessed via the support portal or directly: Joy-IT Support

Information and Take-Back Obligations

Information regarding the Electrical and Electronic Equipment Act (ElektroG) is presented, including symbols, disposal guidelines, and return options for old appliances. SIMAC Electronics GmbH, the manufacturer, is located at Pascalstr. 8, D-47506 Neukirchen-Vluyn.

Support

For any questions or issues, Joy-IT offers comprehensive support. Contact them via:

• Email: service@joy-it.net
• Ticket System: http://support.joy-it.net
• Phone: +49 (0)2845 9360 – 50 (9:30 - 17:15 o'clock)

Visit the official website for more information: www.joy-it.net