User Guide for AudioControl models including: ACR-3 Remote Level Control, ACR-3, Remote Level Control, Level Control
Add volume control to any system The ACR-3 is a remote level control & function switch designed to work with specific AudioControl line output converters and
File Info : application/pdf, 2 Pages, 123.40KB
DocumentDocumentREMOTE LEVEL CONTROL PRECISE AND TACTILE REMOTE LEVEL CONTROL & FUNCTION SWITCH REMOTE CAN BE FLUSH-MOUNTED FOR CUSTOM INSTALLATIONS UPGRADE ACCESSORY REMOTE LEVEL CONTROL Scan for Compatible Products Add volume control to any system The ACR-3 is a remote level control & function switch designed to work with specific AudioControl line output converters and processors. The ACR-3 can be surface or custom-mounted to add level control, or total system volume control, and more to your audio system. Installation is simple and no power is required. Placement And Mounting of the ACR-3 The ACR-3 may be mounted under a dash or console using its own bracket or through custom mounting holes in the dash/console. It should be within reach of the driver and in a spot where the LED is plainly visible. Bracket Installation ACR-3 mounts with four screws, which attach to the underside of a dashboard/console. Slide under the dash or console and place the ACR-3 in its mounting position, mark the mounting holes, drill pilot holes, and secure with screws. Custom Installation For that custom, finished look, the ACR-3 can be flush mounted directly on the dash/console panel (or anywhere else). Referencing the drawing right, disassemble the ACR-3. Drill a 9/32" (7 mm) hole in the panel for the control along with a 3/32" (2.3 mm) hole for the lock tab and a 1/8" (3 mm) hole for the LED. Reassemble the ACR-3 components on the dashboard or console. What's Included? ACR-3 Remote Level Control, 20' Phone Cable (RJ-11) 22410 70th Ave West, Mountlake Terrace, WA 98043 USA Phone 425-775-8461 www.audiocontrol.com 8 55814 00536 5 ©2022 AudioControl. All rights reserved. P/N 912-080-0 Rev A